-
Please search for your request before opening a new thread.
Dear Community Members, This part of the forum is intended to help us track the features that you, our customers, are interested in. We understand that you, as members of our forum, tend to represent more experienced users, often with in-depth knowledge of not only tado°, but similar products and services as well. We feel…
-
"feels like" temperature setting
21c feels quite different depending on the humidity in the room It would be great if the trv would adjust accordingly, depending on the humidity.
-
Open Window Detection Accuracy
Hello, I have recently bought tado x and was disappointed by the open window detection. There should be a manual button to say that the window is opened it shouldn't rely only on fixed changes of Humidity and Temperature ( Some spaces takes more time to lower the humidity and doesn't detect the window is opened) when…
-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Merged: Multiple homes
This discussion has been merged.
-
Multi Home Support
I would like to use tado in my main house and in my vacation home. Currently this is only possible by using one account through the app and the other account using the web-app. I would like to have both available in the same account.
-
Mention remove the existing wireless receiver
Hi all, just installed the wireless starter kit v3+. The installation instructions for Viessman Vitodens 100-W B1KC did not say anything about removing the old wireless receiver. It would be nice with a little mention on that :)
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
Activate open window detection with external window sensors
I would like to be able to use my window/door sensors to activate ‘open window detected’. This would be a great improvement as it will speed up this process and will keep ‘open window detected’ on until I close window/door. I know this can be done indirectly by setting the heater to “off” with ifttt but this means that it…
-
More than one PV array
Hi, The ability to add your Solar Array details to your Tado Balance system was launched a few days ago. Sadly, it doesn't give any way to add more than one array, and I assume most of us have solar panels on more than one area. In my case it's South-West, North-Eas and South East with different angles and numbers of…
-
More detail on device errors - Wireless Receiver
Quite often the Wireless Receiver is showing 'device errors' (blinking hazard light) but none of the devices actually have any issue. I believe that this condition is also explained by the fact that a software update may be in progress. However, this is not at all obvious. It would be really good if there was an option to…
-
Internet Bridge local API
It’d be great if it were possible to interact with the Internet Bridge using a local API so that requests don’t need to be made via the internet. Presumably there’s some kind of http server on the device as HomeKit is able to communicate with it locally?
-
Inputting heating bill for oil kerosene top up.
Is it sensible to firstly input the previous year's oil consumption and average price before we input the last heating bill. Do we use units ie is a unit a litre. Oil is 10kw/litre or is a unit a kw? What's anyone else doing? I have asked via the bot but not got an answer yet.
-
After several years still no range extension?
This topic has been seen multiple times for at least the last 4 years. Where is the range extension??? Second bridge? Still nothing?
-
Smart AC Thermostat Battery Pack & Homekit Upgrade
Hello folks! I'm a tado enthusiast and I built quite an ecosystem at home: always felt that tado products have an extra kick both in design and experience customization which made me choose them above the competitors. I was a bit turned off by the Smart AC Thermostat USB cable hanging along the wall and plugged in the…
-
Need to add an additional Heating Unit in the Energy IQ feature (Cubit Feet) for the UK
I'd like to request that the Tado Development team add an Heating Unit of Cubic Feet (ft3) in the Energy IQ part of the app. At the moment, there is only m3 (cubic metres) and Kwh there at the moment, and a huge number (Millions) of UK homes have gas meters with cubic feet callibration not m3 or kwh. Without having Cubic…
-
Develop a "basic backup schedule" mode for when Tado outage or loss of internet
tado EDIT 10.02.2021: Please read my statement on this topic here: https://community.tado.com/en-gb/discussion/comment/22789/#Comment_22789 Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property,…
-
Plot all rooms on same graph
Perhaps with selectors to show/hide rooms. Would be great to see the interaction between temperatures!
-
Setting to keep the valves fully open in summer
Usually the response how to set all thermostats in summer is to set OFF - but this is wrong, spring of the valve is pressed whole summer and can get stuck when heating season is back and also this reduce "the life" of the valve. Now, there is no way in the app to set all valves to fully open state for summer, I had to…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Priority/importance levels.
I'd like some rooms (i.e. bathroom) to stay at some temperature over night but I don't mind if they are slightly more off the set temperature and I don't want boiler to fire up just for that room. It could be heated up when other room (i.e. master bedroom) needs to turn boiler on. Something like the temperature set to 'no…
-
Back gesture in app
Navigation in the app would be hugely improved by enabling the normal swipe gesture to go back (on iOS, but probably the same on Android). The software back button is at the top left of the screen which I find awkward to tap.
-
2FA / MFA - EU legal requirement
Hi, I've created a new post to again highlight the importance of this to Tado. Without 2 factor authentication/MFA, Tado will soon be in breach of EU law. In 2022, the EU Commission proposed the Cybersecurity Resilience Act (CRA) which introduces mandatory cyber controls to, amongst other things, IoT devices including Tado…
-
Moved: proefperiode Auto-assist V3+
This discussion has been moved.
-
Merged: Radiator Thermostat in Black
This discussion has been merged.
-
Black radiatorknob
I would like a Black radiatorknob on my Black bathroomradiator. I think it is strenge that is not available when a Black radiator is very common these days.
-
Combining the best of Tado and Nest?
I realise the title of this post may sound odd or even controversial but here goes. My system is very conventional (read old fashioned) consisting of a 16 year old Viessman 100 WB1 boiler, gravity fed (tank in roof space) and I believe what is called a Y plan layout with separate two-way valves controlling the heating and…
-
Comfort screen settings
Ability change the comfort range and set a min/max in the comfort toggle
-
Smart AC control to activate AC based on room temperature
Currently the Smart AC control turns on the AC unit at the start of a time block, regardless of the temperature. In my opinion that's a major flaw, because most (all?) home AC units still run their fan even if the room temperature is below the setpoint, so it's a waste of energy and also annoying to have the fan blowing…
-
support for multiple internet bridges
I've had contact with the support team, changed the location of the internet bridge 4 times, support team changed the frequency 4 times. Still I'm waking up to take a shower in 14° degrees with a child of 3 years old. This happens every day for hours at the time, connection gets losts and thus no heating. I'm now having to…