-
Full TRV child lock
The TRV child lock is great for keeping the room set point unaltered but the TRV still lights up when played with. This is enough to keep my daughter entertained and means no manner how many times we move her away she still wants to play with the TRV next to the potentially hot radiator. I propose extending child lock with…
-
Short Boost
It would be very helpful if there was a ‘short boost’ feature, allowing users to turn a device on for a set period only (eg 30m). In my case it would let me heat my hot water outside its schedule without having to remember to turn it off again.
-
more than one property
It would be so helpful if one could flip between two different places, each with the Tado system installed, without having to sign out of one account and into another.
-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Multi Property Support
As a lettings agent, we'd like to be able to install Tado in several properties and be able to access them all from the same app, which we understand can be done by other systems. Is this something that is been worked on for the future, or will it never be implemented ?
-
Extend your gateway coverage
For those who are desperately asking Tado for years to add some range extender option to their product line-up, what follows may be worth reading :-) Recently, as I was in the process of adding TRV's in rooms located in my attic, I faced the "good old" historical coverage issue of Tado's gateway. The big issue is the fact…
-
Tado Widget
I don't understand why there isn't a widget for the app, to be able to see the situation at a glance would be easier that opening the app every time.
-
Switched Fused spur / smart plug controller
Hi, I really like Tado and we have smart thermostats on all our radiators. However, we also like our electric fire on in the living room from time to time. It would be nice if there was a switched fused spur or smart plug option so we could control all our heating devices through Tado. We could control the fire through a…
-
EnergyIQ to include Hot Water usage as well
It would be great to see Hot Water usage along the heating in EnergyIQ. Thanks
-
Add a hot water 1 hour boost button in app
To save going into scheduling for short periods or having to switch hot water off rather than defaulting to the next change please add a simple 1 hour boost button.
-
Show current temperature on TRVs
Would it be possible to have an option to show the current temperature on the TRV? I have the child lock enabled on all my thermostats and when you spin the wheel it flashes the programmed temperature. It would be nice if there was a way to nudge the dial and display the current temperature without having to open the app…
-
Show hardware version in the app
Simple suggestion, display the hardware version in the app along with the rest of the device settings. It might save a lot of support queries looking for this information!
-
Better control of away mode
Hi! I'm using my AC as a heat source for my summer home and away mode is very important for me. "Away mode" is not just "over the day", "while at work" in this situation but the major mode of operation. The problem I have is that you can't create time slots in away mode, so the AC have to stay on and cost money more then…
-
Change room colour in app when heating
Can the app be changed to highlight those rooms that are heating
-
Customers' data and statistic processing, storing, keeping and access
Dear tado° (community) I have a feedback-concern regarding privacy in your service. Recently I had a case with a malfunctioning (I believe so) thermostat head device. While the discussion is still going in that thread, I have another concern: during our conversation the support engineer mentioned: > The last time your…
-
Make Auto-Assist and Energy-IQ tiles active upon subscription activation in the Tado app
Hello, I activated my annual Auto Assist subscription yesterday, but the Active-Assist and Energy-IQ tabs remained the same (advertising the service). I had to contact support about this, just to be told that it is expected behaviour, and that data will get populated after a month. While that makes sense, it also makes for…
-
Smart home automation
Is there a way to set trigger for when humidity is at the set level to send notification via Alexa or Google or any third party integration? Ideal would be to look at the humidity inside and compare to weather forecast humidity level and if outside is lower than inside send notification to Smart home devices or phone to…
-
Recycle unused adapters
Hello. I haven’t needed any of the supplied radiator valve adapters, so I have 7 unopened packets. Be a shame for these to go to landfill. Many others must not use theirs. Can Tado offer a way to return so they can be reused?
-
Set max temp for manual
There is currently a feature for auto stopping manual overrides on radiator valves but there is no option to set the max temperature allowed. My kids keep turning up the temperature to max. Can you consider adding a max temperature setting.
-
Boiler cool down period
Hi, There is a huge need for boiler cool down period. Similar to what Honeywell do, so it doesn't fire up every few minutes again as heat being called for each instance but waits 15-20 minutes in between finishing boiler work and starting new heating cycle. Maybe this is already happening not sure but I have feeling that…
-
Integration for Samsung SmartThings
It would be great if we Tado users could connect Tado to Samsung SmartThings
-
Access to tenants
To allow tenants to use the system, I have to currently give them full access including administrator privileges. Please introduce a feature whereby users can be added that can use the system and control heating without having administrator authority. Thanks
-
Users with different roles
When looking at the user configuration it would be good to see that not all users have full control over the whole system. I am thinking about (for example) 2 roles: An Administrator role and a user role. Obviously, the Administrator can do everything. The user role can be connected to specific rooms and control that room.…
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
Hot Water control in Apple Home
Please enable a Hot Water control in Apple Home.
-
Real window sensors from tado
We would like a real window / door sensor for the "window open function". The current detection of the open windows via the thermostats works so far quite well. However, we have discovered some problems. 1. In some rooms the detection of an open window does not work or does it too late (e.g. bathroom, room with balcony or…
-
Air Comfort telling me my room is too humid !!
The air comfort page on the app and website doesnt appear to be that intelligent. Its telling me various messages about ventilation and not drying clothes in the house and extractor fans etc etc. but what it doesn't seem to be taking into account is the outdoor humidity. for instance - in this screenshot its telling me my…
-
Homekit + manual installation for iOS devices
Besides the homekit integration flow also allow iOS users to set up a device using the Android flow. in order to prevent issues like described by jamieb https://community.tado.com/en-gb/discussion/1270/smart-ac-control-v3-without-homekit
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Usage original airco remote
first of all, my Tado Smart Ac V3 works well with my Daikin air conditioning. Unfortunately I miss 1 function, this is that if someone uses the original remote of the air conditioning, you will not see this in the Tado app, so if someone turns on the air conditioning with the original remote, the app will remain off, so it…