-
Standing charge for energy IQ
It is well know factor within UK for all the providers to charge daily charge (standing charge). Could you please include this option within Energy IQ to be able to set and see the graph with or without (with slider ON/OFF)to represent monthly charges. This will vastly improve accuracy or shown readings in correlation to…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Improve Scheduling Functionality
I think it would be amazing to see the following added to the Tado platform\app to improve functionality and usability. Multiple schedules - This improvement is a must, there needs to be an ability to have multiple schedules per room in place to allow users to manage heating in their homes for different times of the year…
-
Electric Radiator Element
There are Wifi controlled elements for electric radiators on the market so assume this is not an impossible request. However, it would be great for Tado to offer this option to link in with the main app (like the AC controls) which can offer heating to areas of a property where no wet heating system is installed. it would…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
Worcester Bosch Greenstar 4000 System GR4700iW 12 S NG system 12kw
I am planning on purchasing a new system boiler, Worcester Bosch Greenstar 4000 series 12kW its got some very good green features of being able to modulates down to 1.9kW central heating output. I also plan to have a 250L unvented tank. https://www.wolseley.co.uk/product/worcester-greenstar-4000-system-12kw/ The Worcester…
-
Choose if you want TRV to turn boiler on
I would like to have the ability to disable a TRV turning on the boiler when room temperature drops below its setting. This would allow service engineers to flush the heating system without the boiler being turned on. It would also allow the TRV to act in “dumb mode”, stopping a room from over heating but stop it being…
-
Much better support for making a regular water-based underfloor heating system to smart
Hey! It is really good about tado, that you can make your regular radiator into a smart radiator with a device without having to change the system or even call a repairman, but I feel to make a regular water-based underfloor heating system smart by tado is much more complicated. I think I have a typical setup: The easiest…
-
Opentherm : Visualisation of all of the command sent and received by TADO
In TADO pro APP it would be great to see what actually TADO is sending to the Boiler and also the data that TADO is receiving ans needs. I would help greatly to analyse the flow of data back and forth. I am sure that those data are available and used by TADO for Service. There should be also a log file somewhere but I…
-
Set Max opening on thermostat
I would like to be able to set the max opening to ex. 40% for a thermostat. As it is now, the thermostat often opens 70-100% which results in very high return temperatures on the water. This is a problem because I pay an extra fee if I send 40+ degree hot water back into the public net. It would help if I could control the…
-
Integrate with "Loop" or add smart meter display
My Smart Meter display is ancient, I installed "Loop" which clones the display, and I now have easy to read information that will track tariff changes on my phone. If TADO included "Loop" integration with the IQ feature it would be brilliant.
-
Smart Profiles for Rooms
What do I mean? Some of our rooms aren’t used much. For example the guest room. But when someone visits it’d be nice to switch that room to a saved profile, rather than create it from scratch, and then delete it again after the guests have left.
-
Saving Smart Profiles
I know that “Home” and “Away” are basically profiles but I think it would be useful to have more. For example I’d like to save my current settings as a “Winter” profile.
-
Labels for devices
I have a single room (the kitchen) that has multiple radiators in it. I have smart switches on all of them. It would be useful to label the switches, ie “Radiator By the Window”. That way when the battery is low it is easier to know which one it is.
-
Modalita away programmabile
Modalita away programmabile giornalmente come avviene per la modalità home
-
"away" setpoint range
Use tado to run Samsung heater pump. Wish I could set away setpoint as low as 8C. 8C is the Samsung remote control lowest setting. As of now I make a time program, which in intervals 24/7 switch on and off the heater to average the temperature and keep room frost free.
-
Custom Boost Settings
Could you please add the ability to set a custom time and temperature to the Boost Heating All Rooms function. Unfortunately a Boost for 30mins at 25deg doesn't even get my house close to 18deg during cold days. Having to either remember to hit Boost again at 30mins or go through every room thermostat to set individually…
-
Multi-room presets
I would love a feature in the app where various whole-house presets could be customised and then initiated at the touch of a button, creating different heating profiles for each room. For example, I would create a "Work from home" button that would turn up the heat in my home office to 20, and turn down the other rooms to…
-
Lower hysteresis for underfloor heating
We have Tado controlling our underfloor heating but it has two issues: it's not learning and the hysteresis is too big. If I set the room to 20C then the underfloor heating doesn't come on until the temperature has dropped to 19C. It then runs the boiler until the room hits 20C but the residual heat in the floor keeps the…
-
Software feature to allow a SMART TADO valve as a zone valve.
Currently the problem to have a TRUE wireless UFH system is a not there... as you need to run wires to ALL the rooms for the room thermostats... my solution would not require the running of wiring at all but simply use the Tado room thermostats wirelessly paired with the Tado Smart Valves on the manifold without a SINGLE…
-
Black cover plate
You cannot buy a black cover plate, perhaps there are more people who would like it and maybe then they will get them on the market
-
Better block temperature indication in the schedule.
I thought it was great that the schedule had blue blocks for when I wanted it cold (at night and while at work) and orange blocks for when you wanted it warm, nice and easy to see what's going on. But then I saw that the warm block were set to 25 and thought that was ridiculous, so I set them to 18, and suddenly it's all…
-
Black edition TRVs
It’d be super if there was a black edition TRV to match the new black edition thermostats - would look nicer on black radiators than the existing white ones IMO
-
Better support for Underfloor Heating
Hi, I would like to request better software support for underfloor heating systems in the Wired Thermostats when using relay mode. The modulation used by the Tado Wired Thermostates is not beneficial to my system because it tries to turn the UFH on and off repeatably when NOT calling for "full heat" (i.e. when calling for…
-
Range extender would be a very good idea or even two bridges connected to one account
I'm having issues with some of my stats going offline. over the past few days they are intermittently going offline even the ones in strong range. so not sure why this happening. they seem to be going offline one after another. you get one go off then it comes back on and different one go's off. when that comes back online…
-
Fix bug where manual timer for heating changes does not work
Expected behaviour: GIVEN a room has a timer set for ‘Manual control on Tado device’ under settings/rooms and devices AND the room is currently running its standard schedule (ie there is not a manual adjustment currently running) WHEN the user makes a manual adjustment to the temperature for that room THEN the manual…
-
Thermostat should measure humidity in a way that is not useless
Hi, I’ve been using my smart thermostat for a while on firmware 90.1. I have it integrated with HomeKit and as it turns out, using HomeKit (an advertised feature) completely breaks the humidity sensor (also an advertised feature). The humidity sensor is completely out of touch and only reports values every 5% change. This…
-
Target flow temp chart
Hi. I would love access to a target flow temp/time chart. I believe it would be useful data to maximise efficiency. In my case, I had a room with an undersized radiator. On days that this room was used and significantly higher flow temp was required to maintain that room’s temperature. I came across the problem by chance…
-
App translation in Romanian
Hi Tado community, Any idea if a translation of the app would be soon available in Romanian as well? I am willing to support this effort in my spare time, maybe there are other community members that would like to contribute as well. Best, Andrei
-
Flexible Schedules
I think it would be cool to have a way to make different schedules for your house. For example a geust schedule where your geust bedroom and your dining room turn to different heating schedules, whereas perhaps normally your geust bedroom would be off or run on a lower heat I also think there should be a geofencing control…