-
Naming radiators
I have a number of rooms in which I have more than one radiator but all connected under one Tado “room”. It would be good if each individual radiator could be named eg “under the window” so that one knows which battery to replace without having to say Hi to each radiator. This is particularly important when the radiators…
-
Boost by 5° not up to 25°
I have my heating relatively low but if it dips a few degrees and I want to boost it I don’t want to boost to the maximum 25. 5° more than the current temp would be enough. In this age of trying to be energy efficient and a fuel crisis maxing out the temp is illogical
-
Humidity trigger
I think it would be nice to have a humidity trigger as well as temperature trigger. As an example I have a TRV in the basement where the desired humidity is btw 60-70 and the temperature is not really important. It would be great if the TRV kicks in when the humidity is as an example above 70
-
Energy IQ
Could you set it up So we can put the oil Price per litre. So we could use this function. It seems you are only thinking about Gas boilers and not oil. I’m sure there are customers who have oil and would like the same Benifits.We have paid the same price for out Tado products after all
-
Flame 🔥 icon
How about adding a flame 🔥 icon to the heating zones that are currently heating? Would be clearer than it is presently
-
Dazzle mode from Homekit please
When changed manually from Apple Home app, and from Home automations. Would provide extra confidence and visual clues when there are adjustments.
-
Artificial intelligence heating to desired temp
When I set the heating I select a room and temperature. Instead, could the app calculate how long it ‘normally’ takes to heat the room to that temp. Could the app then initiate heating, to the temp at the desired time. This is something I try to calculate but I think some development and an intelligent app could do it…
-
Ability to link rooms
Have the ability to link rooms together so changing the temperature on 1 room will change the rooms that are linked together. Maybe add a global change too so you can change the whole house in 1 go.
-
Let the user set the Price/KWh
Let the user set the Price/KWh on the estimation tool
-
Change currency on estimated energy report
Currently the beta “estimated energy report” appears to be fixed as EUR currency. This should be configurable so users can select their home currency e.g GBP
-
Smart Things integration
Are we any closer to a SmartThings integration?
-
Add an Alexa feature: "Alexa, what is the humidity in the living room/bedroom/etc"
The Tado app clearly shows that humidity is being tracked. We can see the humidity in all the rooms. So those sensors are already present in the Tado devices. Yet, I can't ask Alexa to tell me what the humidity is. I'm a programmer, and I know that this wouldn't take a great deal of programming to implement. So I'm…
-
Sensors for hot water cylinder
I have purchased the tado° Wireless Smart Thermostat Starter Kit V3+ with Hot Water Control, but the control is just a glorified on/off switch. It does not give me any flexibility to control the temperature of the water in the cylinder nor the least to see what the temperature currently is. Due to reasons unknown it…
-
[Feature Request] Apple AirTags and GeoFencing
Hi, One of the limitations of the current geofencing feature is that it is limited to own devices. This means that if we have guests at home (or back when we could and hopefully when will be able to again in the near future) or someone like a nanny and me and my wife leave the house the heating shuts down. A very easy…
-
Be able to set max outgoing water heating temperature in central heating (CV)
In the Netherlands most people have a central gas heater which pomps hot water around in the house through floors, radiators or convectors, also called in Dutch: CV installatie. What I cannot do with Tado is adjust the outgoing hot water temperature of this central heater, via an OpenThem connection, but I cannot adjust…
-
Don't completely disable a room from remote control because 1 device has fallen over.
I searched but failed to find similar though I suspect it is here somewhere..... In a room where there are multiple tado devices (my open plan ground floor has 1 thermostat and 3 trvs) if one device becomes disconnected the entire room is impossible to access. This seems mad. I can't find out the current temperature…
-
Admin users and managed users
Admin users have full access to tado, and managed users just able to adjust the temperature in rooms for a set time period.
-
Tank Oil Level Guage
Hi guys, I'm not sure if this has been suggested before or not but I think an oil level guage in the tank that supplies my heating system that links back to the app would be a great inclusion Not only would it alert you when the oil was low but it could also estimate how much oil you have used each month and work out a…
-
Expose temperature sensors to Apple Homekit
As the title says, would be handy to have access to the temperature sensors in Homekit to create automations e.g. when temperature reaches X do Y
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)
-
2FA / MFA - EU legal requirement
Hi, I've created a new post to again highlight the importance of this to Tado. Without 2 factor authentication/MFA, Tado will soon be in breach of EU law. In 2022, the EU Commission proposed the Cybersecurity Resilience Act (CRA) which introduces mandatory cyber controls to, amongst other things, IoT devices including Tado…
-
Anthracite RAD Thermostats.
Got two lovely anthracite rads in my house but don't want to add white rad thermostats on them. Good idea? Some other colour options would be good.
-
EnergyIQ - Display volume-based monthly forecast
In my opinion, a volume-based metric is more suitable because it is a consistent metric. Volume indication is not subject to change when energy prices/ contracts/ taxes change. Therefore, I suggest showing it alongside the "expected monthly heating cost". Or even better - change it along with the [€ | m3] toggle next to…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
Energy IQ should also work in the desktop environment
Currently it only works in the app which is strange because usually apps are more restrictive.
-
Tado app for Apple Watch or other watch
It’ll be cool, we had an app for the watch for using on Apple Watch or other Stead of using the HomeKit it will be better than he had an app for the watch is the same way as the iPhone and iPad Don’t want to use HomeKit Can you make one please?
-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
Avoiding sticking pins in thermostatic radiator valves
The pins in TRVs often stick in the closed position if the valve is left closed too long - such as over summer. Pre-Tado, I used to open the valves fully for the summer so that the first action at the start of the heating season was to force the pin down rather than rely on the spring to open it up. This avoids the…
-
Adjust humidity readings (Humidity offset)
Graag een optie om een offset mee te geven aan de luchtvochtigheid. Zelfde optie zoals bij de temperatuur
-
Energy IQ to take account of hot water
I find the energy IQ quite useful but it would be so much better if it took into account the gas usage for heating hot water. Can this be implemented so that energy usage for hot water can be shown both separately and combined with heating?