-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Store a basic schedule locally in case of crash / lost connection
My Tado system crashed when I went on holiday when the boiler was on. It stayed on max heating until I got home. Quick sums showed it had burned abut £50 in gas (which Tado refunded in the end) but surely it makes sense to store a limited schedule locally, at the boiler controller. What's potentially worse is if the system…
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…
-
Notification
Can we have a notification when someone turns heating on please.
-
Decouple from cloud please
All we want is to avoid this: https://arstechnica.com/gadgets/2022/04/shameful-insteon-looks-dead-just-like-its-users-smart-homes/
-
Naming radiators
I have a number of rooms in which I have more than one radiator but all connected under one Tado “room”. It would be good if each individual radiator could be named eg “under the window” so that one knows which battery to replace without having to say Hi to each radiator. This is particularly important when the radiators…
-
Boost by 5° not up to 25°
I have my heating relatively low but if it dips a few degrees and I want to boost it I don’t want to boost to the maximum 25. 5° more than the current temp would be enough. In this age of trying to be energy efficient and a fuel crisis maxing out the temp is illogical
-
support for multiple internet bridges
I've had contact with the support team, changed the location of the internet bridge 4 times, support team changed the frequency 4 times. Still I'm waking up to take a shower in 14° degrees with a child of 3 years old. This happens every day for hours at the time, connection gets losts and thus no heating. I'm now having to…
-
Energy IQ
Could you set it up So we can put the oil Price per litre. So we could use this function. It seems you are only thinking about Gas boilers and not oil. I’m sure there are customers who have oil and would like the same Benifits.We have paid the same price for out Tado products after all
-
Flame 🔥 icon
How about adding a flame 🔥 icon to the heating zones that are currently heating? Would be clearer than it is presently
-
Dazzle mode from Homekit please
When changed manually from Apple Home app, and from Home automations. Would provide extra confidence and visual clues when there are adjustments.
-
Artificial intelligence heating to desired temp
When I set the heating I select a room and temperature. Instead, could the app calculate how long it ‘normally’ takes to heat the room to that temp. Could the app then initiate heating, to the temp at the desired time. This is something I try to calculate but I think some development and an intelligent app could do it…
-
Different colour radiator thermostats
We have raw metal radiators and the white radiator thermostat valves look out of place - I may try painting them but think would be a nice idea if Tado offered black and grey etc… as opposed to just white?
-
Ability to link rooms
Have the ability to link rooms together so changing the temperature on 1 room will change the rooms that are linked together. Maybe add a global change too so you can change the whole house in 1 go.
-
Let the user set the Price/KWh
Let the user set the Price/KWh on the estimation tool
-
Smart Things integration
Are we any closer to a SmartThings integration?
-
Add an Alexa feature: "Alexa, what is the humidity in the living room/bedroom/etc"
The Tado app clearly shows that humidity is being tracked. We can see the humidity in all the rooms. So those sensors are already present in the Tado devices. Yet, I can't ask Alexa to tell me what the humidity is. I'm a programmer, and I know that this wouldn't take a great deal of programming to implement. So I'm…
-
Sensors for hot water cylinder
I have purchased the tado° Wireless Smart Thermostat Starter Kit V3+ with Hot Water Control, but the control is just a glorified on/off switch. It does not give me any flexibility to control the temperature of the water in the cylinder nor the least to see what the temperature currently is. Due to reasons unknown it…
-
[Feature Request] Apple AirTags and GeoFencing
Hi, One of the limitations of the current geofencing feature is that it is limited to own devices. This means that if we have guests at home (or back when we could and hopefully when will be able to again in the near future) or someone like a nanny and me and my wife leave the house the heating shuts down. A very easy…
-
Be able to set max outgoing water heating temperature in central heating (CV)
In the Netherlands most people have a central gas heater which pomps hot water around in the house through floors, radiators or convectors, also called in Dutch: CV installatie. What I cannot do with Tado is adjust the outgoing hot water temperature of this central heater, via an OpenThem connection, but I cannot adjust…
-
Don't completely disable a room from remote control because 1 device has fallen over.
I searched but failed to find similar though I suspect it is here somewhere..... In a room where there are multiple tado devices (my open plan ground floor has 1 thermostat and 3 trvs) if one device becomes disconnected the entire room is impossible to access. This seems mad. I can't find out the current temperature…
-
Admin users and managed users
Admin users have full access to tado, and managed users just able to adjust the temperature in rooms for a set time period.
-
Simple Improvements to App Homescreen View
I'd like to suggest a couple of simple improvements (IMHO) to the content of the homescreen room tiles in the Tado app: The tile is large, and there is plenty of spare space on it, so could we get an indicator of the room's temperature behaviour. What I mean is that if the room temperature is rising then an arrow pointing…
-
Expose temperature sensors to Apple Homekit
As the title says, would be handy to have access to the temperature sensors in Homekit to create automations e.g. when temperature reaches X do Y
-
Multiple homes
I would like to see the ability to view multiple properties from one login, having multiple places to manage is not easy when you have to logout and login to view second homes
-
Make Opentherm boiler specific tweaks possible
Hi! I'm having an issue with opentherm using my boiler Enbra CD34H. After some troubleshooting I found out that issue is caused by Opentherm message ID 14 (Maximum relative modulation) being send too often by Tado (every 6s). Unfortunately support is unable to change this to 2mins intervals (which would fix the issue) for…
-
Custom Smart Schedule
Hi , I often need additional options depending our home situation. Most of the time I need also a schedule Home but upstairs OFF or Home but upstairs normal schedule. When kids are home sick or we plan to use more the upstairs during the weekend
-
Display Humidity level on wired and wireless sensor display
It would be important to allow the display of humidity levels on the wired and wireless sensors (square devices) when pressing the round button. This feature could be configured in the app. The humidity level would be displayed just after the temperature. You can also extend this display to smart radiator valves.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)