-
Smart Profiles for Rooms
What do I mean? Some of our rooms aren’t used much. For example the guest room. But when someone visits it’d be nice to switch that room to a saved profile, rather than create it from scratch, and then delete it again after the guests have left.
-
Saving Smart Profiles
I know that “Home” and “Away” are basically profiles but I think it would be useful to have more. For example I’d like to save my current settings as a “Winter” profile.
-
"away" setpoint range
Use tado to run Samsung heater pump. Wish I could set away setpoint as low as 8C. 8C is the Samsung remote control lowest setting. As of now I make a time program, which in intervals 24/7 switch on and off the heater to average the temperature and keep room frost free.
-
Integrate with "Loop" or add smart meter display
My Smart Meter display is ancient, I installed "Loop" which clones the display, and I now have easy to read information that will track tariff changes on my phone. If TADO included "Loop" integration with the IQ feature it would be brilliant.
-
Floor heating -> Open Window Detection = keep current heating setting
Hi, open window detection works fabolous for me in terms of recognizing open windows quickly. However, for floor heating, the action of switching off heating for a short 5-10min ventilation of a room does not make a lot of sense from my point of view since the floor heating is anyhow quite slow in reaction (compared to…
-
Labels for devices
I have a single room (the kitchen) that has multiple radiators in it. I have smart switches on all of them. It would be useful to label the switches, ie “Radiator By the Window”. That way when the battery is low it is easier to know which one it is.
-
Adapter for Danfoss RA
If you want your Tado thermostat assembled well on a Danfoss RA valve, please do yourself a favor and buy at the same time an extra metal adapter (eg Heimeier type: 970224700 for appr €10,-). This is the best way to fixate the thermostat. Tado's plastic adapter is rubbish and the helpdesk is playing stupid instead of…
-
Modalita away programmabile
Modalita away programmabile giornalmente come avviene per la modalità home
-
Software feature to allow a SMART TADO valve as a zone valve.
Currently the problem to have a TRUE wireless UFH system is a not there... as you need to run wires to ALL the rooms for the room thermostats... my solution would not require the running of wiring at all but simply use the Tado room thermostats wirelessly paired with the Tado Smart Valves on the manifold without a SINGLE…
-
Black cover plate
You cannot buy a black cover plate, perhaps there are more people who would like it and maybe then they will get them on the market
-
A configuration option to delay geofencing (returning home)
I propose a configuration option to delay heating (when automatic geofencing is used) when returning home. This could be useful for single person households where primary mode of transportation is cycling. Rationale: Most of the time I travel by bike. When I return home, heating is not necessary for about 30 - 60 minutes,…
-
Energy IQ cost to account for standing charge
I find the estimated gas cost estimate to be reasonably good, but the cost shown is for the consumption cost only. It would be useful for option to include the cost of daily standing charge such that the total month prediction / comparison reflects the total bill for gas not just the consumption.
-
Better block temperature indication in the schedule.
I thought it was great that the schedule had blue blocks for when I wanted it cold (at night and while at work) and orange blocks for when you wanted it warm, nice and easy to see what's going on. But then I saw that the warm block were set to 25 and thought that was ridiculous, so I set them to 18, and suddenly it's all…
-
add name to devices
hello, it would be nice to be able to de a name to the devices in a room. for the moment we find the number there would be more understandable if we could add a name
-
Manual adjust graph axis
I would like to be able to adjust the axis of the temperature graphs in the Tado app. Currently this goes automatically hence graph axes jump every day and is different for each room. That makes it difficult to compare different days or rooms and makes it difficult to observe how quickly a room heats up or cools down. I…
-
Energy IQ to take account of hot water
I find the energy IQ quite useful but it would be so much better if it took into account the gas usage for heating hot water. Can this be implemented so that energy usage for hot water can be shown both separately and combined with heating?
-
Fix bug where manual timer for heating changes does not work
Expected behaviour: GIVEN a room has a timer set for ‘Manual control on Tado device’ under settings/rooms and devices AND the room is currently running its standard schedule (ie there is not a manual adjustment currently running) WHEN the user makes a manual adjustment to the temperature for that room THEN the manual…
-
Average temperature of multiple thermostats in same room
In a large room with multiple radiators/thermostats, it would be good to have the option of using the average/weighted temperature instead of having to choose one device.
-
Better overview of all schedules in one view
I’d find it really useful to have an overview of all the schedules of my smart valves so I can see when the heating generally kicks on and off to be able to review my system more efficiently. At the moment I have to check every valve individually just to see I’m when everything turns off and on in order to refine my setup
-
Thermostat should measure humidity in a way that is not useless
Hi, I’ve been using my smart thermostat for a while on firmware 90.1. I have it integrated with HomeKit and as it turns out, using HomeKit (an advertised feature) completely breaks the humidity sensor (also an advertised feature). The humidity sensor is completely out of touch and only reports values every 5% change. This…
-
Control4 Driver
I don’t know if this has been brought up but it’s 2022 and Tado either needs to make a Control4 driver and make the API easily available. My integrator shouldn’t have to search the internet to find the api.
-
Allow Tado App to display independent Temperture readings
I don't want to put a £70+ tado device with a IP20 or IP30 rating in my 99% humidity Bathroom, but I would like to be able to see the reading from a (much cheaper) none Tado Alexa enabled measurement device. Can this skill be added?
-
App translation in Romanian
Hi Tado community, Any idea if a translation of the app would be soon available in Romanian as well? I am willing to support this effort in my spare time, maybe there are other community members that would like to contribute as well. Best, Andrei
-
Flexible Schedules
I think it would be cool to have a way to make different schedules for your house. For example a geust schedule where your geust bedroom and your dining room turn to different heating schedules, whereas perhaps normally your geust bedroom would be off or run on a lower heat I also think there should be a geofencing control…
-
Tado tiles a waste of an oppitunity
I am a new comer to Tado and the biggest disappointment is the app, the tiles on the Home section is an utter shambles, I find it really stupid having to go into a tile to view the inside temp, humidity and heat request (the 3 little squiggles) and the fact that no icon with in the tiles show if the radiator is receiving…
-
Names, notes and status
It would be useful, at least to me, to be able to give a name/location note to each individual Smart Radiator Thermostat and I would also like to be able to see the open/closed status of each SRT.
-
Child locks for all devices
It would be good to have child locks for all devices, wireless thermostats and wireless AC controls. Wireless AC controls need to be fitted to make them smart but ideally want them to not be manually controlled by the occupant
-
Hot water stats
Any chance to have stats for the hot water? At the moment it is impossible to see how long the hot water has been on for a day/week/month/etc I can see when the boiler has been on but just for heating.
-
Wireless Temperature Sensor child lock
When linking temperature sensor with tado TRV and child safety lock is enabled on TRV. You can still override and control the TRV by adjusting the temperature from the wireless sensor. Please add the option to enable child lock on the wireless temperature sensor or to the room.
-
Please implement the possibility of disabled the three LED lights of the internet bridge
Hi Everyone, the Tado internet bridge has three very bright LED lights. I would like to have the possibility to disable those LED lights please. A configuration as described below could be useful for all users: by default, after booting, the LED's are also on but in the app and/or the web portal you can choose to disable…