-
Display temperature
Please enable permanent display of room temperature. Graag (mogelijkheid van) permanente weergave van de actuele kamertemperatuur
-
Geofencing per room per person
My wife and I both work from home and have tado TRVs in our home offices. It would be useful if our individual rooms turned off heating when either of us leave the house. So if I’m still at home my room could stay heated but if my wife left the house the geofencing could detect that she was out and could turn the heating…
-
Mesh system
I have a very long house with thick stone walls so the internet bridge cannot reach all my radiators. My internet system uses a mesh system to get WiFi to all areas of my home I was hoping that this type of system could be used by tado to solve my problems.
-
Working Support
Here is a really novel idea. A support service that actually supports its customers! Having run into an issue, finding out that all support is now via the chat bot. Only to find that no support engineer has even looked at the request in nearly 48 hours. Disgraceful!
-
Energy IQ - room heater size
Allow us to enter the size of radiators or UFH systems in rooms to get a better estimate of which rooms actually use the most heat. At the moment I assume the estimates are useless as my 300W towel rail is the highest usage in my home despite having multiple 2kw radiators elsewhere.
-
Minimum TRV level
When a TRV is closed down to less than 5% it probably doesn’t allow any significant flow and is effectively off. However, it still calls for heat, and the heat source continues to run when it may not be needed. It would be useful if the TRV closed fully once it reached a minimum threshold.
-
Alternate heat source
Would it be possible to have a button for alternate heat source. This would allow tado to work as normal but not trigger the boiler to come on. I have a back boiler that is used during the winter that heats the house and water so the boiler is not required in order to have the radiators open I currently leave tado to do…
-
TRV thermostats open without requesting heat for a back boiler stove
I have a back boiler stove that heats my radiators and hot water when we use it. - in addition to our burner Every time I do this, I have to unplug all the TRVs manually. My friends laugh at me because of this. Why is there not a mode to open the valves without requesting heat? This would also help with bleeding radiators…
-
Create more scenarios
Please create more scenarios than just “Home” and “Away”. Note how Philips Hue do it. Eg being away for just one day make you want to turn down the heat less than being away a whole week. Not having this option means you have to adjust the “Away” scenario all the time to fit your needs
-
2 factor authentication
Todo has a web app! It's not really comfortable to know someone can control your home just by having your login 2FA should be mandatory
-
Option to show demand temperature set in the schedule on the room temperature display
It would be helpful if there was an option to show the temperature demand from the schedule as a line on the room temperature display. I know that you can see it if you hold your finger on the temperature line of the graph, but it would be much easier to see how the room was performing if the temperature demand was shown…
-
Support current and more recent Vaillant eBus controllers
Tado asserts the benefits of modulating boiler control and touts compatibility with Valiant and eBus. However, the reality is rather grim. It turns out that as of 2019-03 eBus is only supported in these scenarios using the now discontinued VR65 controller. No other controllers are supported (VR66 for example). This means…
-
Software feature to allow a SMART TADO valve as a zone valve.
Currently the problem to have a TRUE wireless UFH system is a not there... as you need to run wires to ALL the rooms for the room thermostats... my solution would not require the running of wiring at all but simply use the Tado room thermostats wirelessly paired with the Tado Smart Valves on the manifold without a SINGLE…
-
tado° transparency time slots dark mode (ITA: tado° trasparenza fasce orarie modalità scura)
EN: The new graphic design of the temperature graph is beautiful, but there is a small problem in the dark mode. In fact, the shade of the vertical bands should be proportional to the heating intensity, as happens correctly in the light mode; but unfortunately, this does not happen in dark mode. Since in dark mode the…
-
Hot water monitoring & Tado hot water tank thermostat
Hi, I'd like to be able to monitor our hot water, so I can see when the hot water is requesting heat from the boiler and ideally see the temp of our cylinder tanked hot water. The app shows simply off and on. We have the Extension Kit controlling our heating and hot water. There is no way of telling when the hot water has…
-
Need for multiple profiles
Dear Team, I have installed 12 Tados so far in my house and more are to come. I like the idea, although it is not a new one. However, yours seems to work 👌 Having said this, I am missing one huge functionality: as an example: if you have your kids over every other week, I would need to every week redo the schedules so as…
-
Use sliders for Scheduling
It is not simple at all to edit a schedule. Please use a more intuitive way. With sliders or contextual menu etc..
-
Dead battery actions
I may have missed the low battery email. As a result, the heater was set to Max, the room was super hot for days, with no possibility to lower the temperature. An idea would be to automatically set the temp to 20C when battery reaches 5%, or send a last email alert before it dies, or allow to manually lower the temp. Using…
-
Batterie faible pour poignée radiateur
Quand la batterie est morte, mon radiateur s’est mis en température maximale. Donc pendant plusieurs jours, la pièce était très chaude avec aucune possibilité de baisser la température. Il faudrait explorer des options, comme mettre le reglage sur 20 degrés quand il reste moins de 5% de batteries, ou permettre de baisser…
-
Calendar
Please enable to set future settings, eg. for planned holidays.
-
Show heater status
Show a right led when the heater is actually heating to raise the room temperature. Show a white led when the heater, the thermostat or their connection are out of order. Show no led when room temperature is as demanded.
-
Rename air conditioning units
I have since recently air conditioning units in different rooms at home. I bought the airconditioning system from Tado thinking it would have similar features as the heating knows when using the app. But it doesn't. It's impossible (to my knowledge) to rename the separate units in the app, meaning that I'm too often…
-
Change Air Comfort section of APP
On the "Air Comfort" section. There does not seem to be a way to request temperature and/or humidity of a specific room. I get the impression that your algorithm aims for room temperature of 23C temperature/42% humidity. Is 23C not rather high and energy wasteful?. I am sure there is a simple way to modify your algorithm…
-
Simple fix for the smart TRVs
My smart radiator valves can’t heat a room without setting a large temperature offset due to the sensor being too close to the radiator. This feature doesn’t work very well because when the radiator turns off tado thinks my room temperature plummets, and then instantly turns the radiator back on. This seems to be a very…
-
[Energy IQ] Allow for new meter and continue entering meter readings
When replacing a meter, it becomes hard to continue entering meter readings as one has to add the last old meter reading to the new meter readings (and sometimes even subtract the first new meter reading from that number too). Under Energy IQ, provide a meter reset button, with for the date of changeover: ++ the first new…
-
More compatible heat pumps
At…
-
PID regelaar voor de sturing van de thermostaat knoppen
Vanuit de klanten service kreeg ik de vraag of ik mijn vraag hier wilde stellen. Graag zou ik zelf de PID-regeling van de thermostaat knoppen zelf kunnen instellen. Dit omdat niet alle knoppen bij mij een radiator bedienen.
-
New idea: respond to valid user suggestions?
Hey tado development team, being an owner of a software agency myself, it's a huge red flag to me when I see rather trivial user requests and improvements just sitting there for five years (!!!) without an official response. Some guy named "Frank" answered who seemed like a tado rep, but his account is deleted now.…
-
Child User Account
It would be useful to give family members different user rights on the 'People' part of the app so that only certain people can change settings and others benefit only from Geo fencing.
-
Set a default shut off time
My kids turn on the thermostats in their rooms and every time it defaults for stay on until they (or me) click resume schedule in the app. I need some sort of over ride that shuts off after a specified time if they turn the on. Say, a option for the thermostat to run for a max of x minutes / hours that can only be adjusted…