-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Manual mode for smart radiator thermostat
I would sometimes prefer to keep my radiator always pleasant warm instead of turning it off and on every time temperature on sensor rises and falls. I suggest to introduce manual mode where user manages the valve position like on a regular thermostatic head. Let's say on the usual scale 1 to 5 instead of setting the target…
-
Lock/Limit Selection of Temperature on Thermostat via App
I currently have a Tado installed in an air BnB and recently I had a guest which turned the temperature upto maximum for a couple of days. It would be a good feature to be able to allow us to limit what temperature the Tado could be set to within the App. For example, limiting it to 22C or even locking it completely.
-
Alarms when temperature exceed setting
My daughter is away for a full academic year abroad. I did set temperature to 15 deg c close the doors and forget about it….. a few week later my wife went into her room and discovered the temperature at 35.7 deg C! what not having an alarm alerting dot this? thank you
-
fahrenheit/celsius toggle
Hello! We use Tado at home & are quite happy with it. It is not linked to Alexa or Apple Home or any of those fancy things. We just use the Tado app. It would be great if there was a toggle in the settings where we could change the temperature from celsius to fahrenheit or vice versa. I checked the forums & there wasn't…
-
Better Siri Integration
Hey Siri, boost heating Hey Siri, boost heating for an hour
-
App should indicate if a room schedule is active or not
On the main home screen with a list of rooms. There is no indication on a room if the schedule is active or not.
-
Cubic Feet and Standing Charge in Energy IQ
It’s great being able to add meter readings to get an idea of cost but in the UK many meters are in cubic feet not cubic metre so would be good to have this as a measurement type. Also the forecast cost does not include a daily standing charge and it would be really useful to be able to add this too…
-
Ability to cool using my smart thermostat?
Hello, I wish the smart thermostat had the ability to cool as well. My geothermal heat pump heats as well as cools. Right now I can only use Tado for heating. It would be great if I could change the mode of the Tado Smart Thermostat to 'cool' in summer and 'heat' in winter. If you need more information about my set up,…
-
Option to see humidity on home page room buttons
Hi, in our house we struggle with high humidity in the winter. I find the tado humidity sensors in the radiator valves to be very useful, but it would be even more useful if I could see at a glance the humidity in all the rooms. On the app homepage I can see at a glance all of the room temperatures in the 8 rooms I have…
-
"Lifestyles" - multiple user set memory presets of temperatures for each room
Add a section to the Tado app for "Lifestyles" (or similar name to avoid copying Honeywell Hometronic/ Evohome/ Evotouch) Multiple user set presets so a one button push in the app will activate or deactivate a memory programme with user pre-determined temperatures for each room. i.e. Lounge 22 deg, Kitchen 21 deg, Bedroom…
-
Sleep mode on tado thermostats
Sleep mode to toggle to a different temperature setting like away mode. I go to sleep at different times.
-
Time for Matter
Being able to interconnect with other devices, sometimes produced by multiple vendors in a smart house matters(pun intended), especially when the internet goes down. A smart home is a sum of all its smart devices. Currently tado is one of the multiple weakest links at least in my home. For tado to “matter” in our future…
-
Scheduled "Call for heat"
atm we have the option to enable or disable a zone controller, and this stops the room calling for heat from the boiler. But, I think due to the cost of living crisis around the world atm, it would be a good option if Tado˚ could move this option to the Scheduling screen. My idea would be for each time block in the…
-
Support 8°C mode on Toshiba AC heatpump
Today I can either control the temp fro. 17°C and upwards or I must shut the AC off. If I shut the AC off then I risk that the water can frezze inside my cabin. Most AC support an 8 °C mode to ensure that this will not happen. I can't find a way to do this in the TADO app
-
TRV set all blocks temps
If I decide I want the bedroom to be heated to 20 rather than 18, I would like the ability to update all blocks to 20 rather than having to edit each individual block.
-
Notify TRV may not be seated correctly
I failed to correctly refit a trv following some decorating. Since by default (pin up) means valve open, the radiator would get hot when tado was set to be off. Tado should be able to identify the increase in temp repeatedly/consistently coinciding with the central heating being active when trv is set to be off. This…
-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
p/kWh
For the UK Market, the tariff is in p/kWh for Gas. for example my tariff is 10.33 p/kWh But on the tado app i can only imput £/pWkh so my energyIQ is not correctly showing my usage. Is this something can be implemented?
-
Away Mode by Mobile Device
So my wife and I work from home, yet on some days (random days) either of us may go into the office. We work in 2 separate rooms at home. Because I do not know the days either of us will be in the office I need i remember to turn the programmed heating off in the room in which no one will be working that day, and…
-
Lock wireless thermostat
Can I lock my wireless thermostat ? If not when will this feature be available Thanks
-
Switch all off for 1,2,3 hours
Any chance of a function to switch off all heating for a set period and for it then to return automatically to schedule? Thinking of when, for example, we go to bed early and heating doesn’t need to be on. It’s possible to switch off, but need to wake up and remember to switch back on for the morning. Automatic resumption…
-
New gas meter in Energy IQ
In Energy IQ add the possibility to start meter readings back at zero after installation of a new gas meter. At the moment you have to delete your complete history before starting back at zero.
-
Profile related away mode
A possibility could be to relate and correlate the away to different profiles. When one Profile-A and Profile-B are at home ALL the house will be warmed. When profile-A and Profile-B are out ALL the house will NOT be warmed When profile-A is at home and profile-B NOT only commons rooms and profile-A related rooms will be…
-
Large House Capability
I have a new Tado system fitted to an old oil boiler and I am mostly loving it. The issue I have is thick walls and scalability. I have maxed out devices so had to change back to regular TRVs in some rooms and I have maxed out on zone controllers. The bridge can never see all TRVs or Wireless Temperature Sensors (WTS) at…
-
Merged: Heating Schedule based on number of people at home
This discussion has been merged.
-
Dry clothes function
I have a dehumidifier and together with the room humid graph I known when I need to turn heater on, open windows (when humid outside in lower than inside, it could be found in local forecast) . I see when cloths are drying by the humid going up, but after 85 it doesn't dry than I have options, open windows, turn on the…
-
Simply show heating on and which rooms requesting on the App
When I open the app I want to (really need to) be able to simply see: Has Tado requested my heating to be on? Which smart radiator room(s) is triggering the request We've just fitted smart radiator thermostats, and our heating is on unexpectedly. Driving me mad trying to work out why it is on (or off!!!). The heating has…
-
Control hot water with wireless reciever from more then 1 thermostat
I have 2 tado thermostats, one upstairs and one down stairs but can only turn the hot water on manually from one of them via wireless reciever, only a minor issue but think it would be useful to be able to control from both!
-
Add silent mode to app and API
Many aircons have a silent mode for at night. I use his mode very often and it can only be enabled with the original remote. It would be great if the silent mode is added to the app and to the API so domotica developers can use it too.