-
Temperature alarm
It would be good to be able to set alarm if the real temperature is not following scheduled temperatures. Then we would be able to react. Best regards
-
Temporary User
It would be nice to be able to add a user for a limited time. With guests staying, they can conrol tado, but only until a certain date/time and be able to activate geofencing.
-
Build own iOS app or use iOS shortcuts - use API to allow multi home support
Hi, Has anyone played with the idea of either building their own iOS app or using iOS shortcuts / automation to make API calls? Specifically making an API call to set home or away status based on geolocation. I don’t need any more multi home support than geolocation, everything else is OK in the web interface (if I have…
-
More than one tado
I have a holiday home where I have installed tado and I am very pleased with the system. The remote control by phone is excellent. I would like to install tado at my main house but I can’t because you can only have one application on a phone. I think it would be great to be able to have more than one application on a…
-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Day OFF
The app is missing a key feature for those that have different heating for different days (like weekdays and weekends). For example, I work Mon-Fri, 9am-5pm like a lot of people do. But during annual leave, bank holiday or when off sick, I would like the weekend schedule to follow without reprogramming the whole thing. So…
-
Air Comfort suggestions
Hello, We're supposed to make energy savings with Tadoº, but it's quite inappropriate to get a suggestion to turn the heating on when a room is just below 20ºC. The World Health Organisation recommends a room temperature of around 18°C in Winter, and The Energy Saving Trust advises setting the thermostat to around 18-21°C,…
-
Night mode for wireless receiver (no lights)
We have installed the wireless receiver in our son's room replacing the previous controller that was placed there. Everything works fine but at night the lights are like so: We need a blackout room for our son to sleep (he is nearly 2 years old) and these lights unfortunately keep him awake. A feature I would like is to be…
-
Outdoor sensor
Outdoor sensor is excellent idea and a LCD wireless main panel tablet with all information on it , each room outdoor information and online weather from met office. Including usage of gas
-
1,0 degree isotherms in graphs (now 1,5 degree)
Currently in the temperature graphs the horizontal isotherm lines are spaced 1,5 degree Celsius apart. This makes the reading very uneasy and awkward for the untrained observer. Can you please set them 1,0 degree apart?
-
Allow a range of temperatures for a schedule (e.g. "comfort enough")
Add an ability to define temperature in a schedule as an acceptable range. E.g. in the morning heat to 20C if it's lower than 19C. This could be useful in many scenarios. For example, your room is already at 19.5C, and the schedule says 20C. There's no need to run the boiler to heat it for 0.5C more. Especially if it's a…
-
Child lock for Airco controllers
Add a feature to the smart ac controllers just like child lock on the thermostats. Our help in the household sometimes trigger the smart ac controller when we aren’t home and this enables the airco controllers. Currently I configured the tado app to revert any manual input after 1 minute, but with a feature similar to…
-
Better Boost Options
I was pleased to see the boast function for the system but very disappointed that you can't select the temp (25 is way to high for my house), or select to just boost one room/trv. I find that I often want to boost a room for just 10mins, and only being able to boost for 30mins at 25 is wasteful and unnecessary. I see that…
-
Alarms when temperature exceed setting
My daughter is away for a full academic year abroad. I did set temperature to 15 deg c close the doors and forget about it….. a few week later my wife went into her room and discovered the temperature at 35.7 deg C! what not having an alarm alerting dot this? thank you
-
Boiler modulation + zone valve control
I would like the option to use my extension kit to control the boiler via opentherm, but still have my wired thermostats click over when that sensor calls for demand so that I can use it for my zone valves. Really don’t understand why this isn’t an option, many home in the UK have zone valves meaning boiler modulation…
-
Window open notification
Window open notification could tweak little bit to show which window is open on quick notification. So user doesn’t have to open app always. or an announcement system [ smart speaker] if a window open
-
Emoji's in Room Names
It would be great to be able to "color" code the rooms with emoji's for an even nicer overview in the app homescreen. Currently some emoji's work fine (e.g. "✨ Bedroom"), while others result in an error (e.g. "🪴 Living Room"). The error after submitting a name with a "faulty" emoji:
-
Quick on off button per room
Hi! The Tado app mainscreen already features a on/off button pictogram on each room. I would love for them to work as on/off buttons too! So you can resume schedule or stop heating a specific room with just one click.
-
Support multiple schedule configurations such as spring etc..
It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not. It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch…
-
Geo Fencing Position Override
The geo fence is based on a location and a radius. The location is determined by the address given to the home but cannot be overridden. It is problematic when a building or a unit is far from the street (courtyards, especially in Berlin), or for houses built far from the road and requires to increase the radius. It should…
-
Receive smart meter data
Either access smart meter data, or contact loop to share their access. Use this data to attribute costs to room schedules.
-
Admin users and managed users
Admin users have full access to tado, and managed users just able to adjust the temperature in rooms for a set time period.
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Display must be on all the time
I would like to request tado to add continuous display feature which shows temperature or another animated messages ..which makes it very cool ..hope everyone wants it too
-
TRVs recognising when a call for heat has failed
I got up to a cold house this morning. I looked in the app and all TRVs were “heating to 20°” however, despite it being 8.15am and my schedule being set to start heating at 6.45/7am all rooms were still only 16° or thereabouts. It turns out my combi boiler had dropped pressure resulting in the boiler being unable to fire…
-
Homepage tile ideas (outside temp & wood burner temp)
Hi, just something that would be good to see would be ability to add a tile that displays outside home temp (via weather info source) and wood burner temp (of course would require additional hardware)
-
13 amp controller
Make the wireless thermostat capable of switching 13amps for heaters etc.
-
Support for UFH pumps
I have a single room with underfloor heating and would like to switch the manifold pump when the room calls for heat. This avoids inefficiency from circulation when the boiler is off. Ideally the pump would only be enabled when the room calls for heat, but it would also be okay whenever the boiler is on. I would prefer to…
-
Smart Schedules Profiles
As a user I want to be able to have multiple smart schedules that can be assigned to rooms without having to copy and paste. For example, I want a Smart Schedule for summer time and another one for winter time without having to tweak the temperatures or, for example, turn off a room, the office, while I am on vacation.