-
Push hors domicile
Il est en général inutile de vouloir activé le mode "hors domicile" quand le chauffage est mis sur "hors gel"
-
Smart AC Control V3+ air purifier function
Hi, some air conditioners have an air purifier function. can you add this function? info : tekno point skiv air conditioner with the RA1A2 remote control
-
Smart AC Control V3+ sending the temperature measured by the Smart Thermostat to AC
some air conditioners have a function allowing the remote control to send the temperature it measures. with my tekno point skiv air conditioner with the RA1A2 remote control, the function is called "I FEEL button". could you integrate this functionality, so that the smart thermostat sends the temperature measured by the…
-
Ampliar el número máximo de habitaciones controladas por un controlador
Veo interesante poder controlar más de 10 instancias con un controlador. En mi caso, tengo 10 cabezales termostáticos, una por habitación, y si instalo un cabezal adicional en un dormitorio distingo no podré controlarlo.
-
May I kindly request you to stop using odd numbers on the Y axis of your graph?
I can’t believe you still ignore so many of your clients asking for an update on this feature since 2019. It’s quite easy to address the issue by either stop using odd values on the Y axis for temperature and humidity or, allow the user to manually adapt it with his own preferences. Sorry but having horizontal graduation…
-
Allow heating of rooms that don't have a tado device installed.
I have some radiators without a TRV. Would be good to be able to heat them up i.e: turn on the boiler with the thermostat, but turn off all the other radiators that have tado Smart TRVs.
-
Range improvement and live signal strength for connection status
Please support the addition of a second Bridge to a single account - this would solve the annoying range issues with valves cutting in and out of reception. Equally the information to indicate signal strength for devices would help bridge position.
-
Princess Air Conditioner
Please make the Smart AC Control compatible with Princess Smart AC 9000
-
Hot Water control in Apple Home
Please enable a Hot Water control in Apple Home.
-
"open window detection" online when heating is on...
during the summer i still get (lots) of "open window detected" notifications. but the heating is not on... would be great to only get this notification when energy can be saved
-
Access to bad connection data and signal strength
To help with placing the internet bridge, It would be helpful if there was an easy way to see when devices (eg radiator thermostats, wireless boiler controller etc) have disconnected from the internet. A list of the times they disconnected/reconnected or even just a total count of the times this happened. Currently to see…
-
Summer Mode: Open/close your windows during Summer notifications
It would be great if during Summer you could get notifications to open your windows when the outside temperature is lower than the indoor. And to close your windows when outside is warmer than inside (or predicted to be soon). This is currently not easy to do with Apple Home automation or Apple Shortcuts so it could be a…
-
Make app developers to have multi homes into one account
Many Smart home Apps have multi home capabilities, for example my Kwikset App or My Tapo App allow me to control smart door locks or cameras in two different homes. Hence, this is not rocket science is an easy fix for the Tado App. So I hope is done soon
-
physical child lock to prevent removing tado knob from radiator
My 11 months old son is removing the smart radiator knob from the radiator (likewise how I would change the batteries). This opens the valve of the radiator completely and he can burn himself to the radiator. Please design knobs in such way that they can't be opened and removed that easily. Thanks
-
Single graph to show when heating was called
I have an interesting situation where according to my gas meter I'm using gas during the night, however there's no simple way to see which room is causing this to be triggered without looking at each graph in turn. Can we have a single graph which shows when heating was called for each room please.
-
Turn on radiator valve for maintenance
Not sure if this is already implemented but I couldn't find it. It would be nice if we can open the radiator valves for maintenance even if the temperature is way above 25º. I needed to manually open all the radiator valves for maintenance.
-
aircon control should be battery powered as per thermostats
I am disappointed that the aircon control needs continuous mains power and not battery as per thermostats
-
Varios termostatos y varias válvulas termostáticas
Buenos días.yo ya tengo en dos viviendas los termostatos y cabezales termostaáticos Mi duda es la siguiente.Tengo un hotel con tres zonas gobernadas por bombas y termostatos independientes .Quiero montar Todo cableado.Mi duda es la siguiente: *Quiero poner en cada habitación una válvula termostáticamente .Puedo hacer q…
-
Merged: Setting to keep the valves fully open in summer
This discussion has been merged.
-
Schedule that is NOT internet dependent (safer)!
If you are on holiday and your internet drops, Tado continues with whatever setting it had at the time. In other words, your hot water could be ON for the rest of your holiday, not a good thing (and you will not know about it as you no longer have remote access). This is the one flaw I find in Tado. It appears that…
-
Comfort Zone - Change comfort temperature display
I find 20 degrees too hot for “comfort” and prefer to be able to adjust when it shows as orange and when it’s too cold or hot for ME. Comfort zone is a known Zone, not absolute and different for different people, what is hot for one person might be cold for another. Our comfort temperature changes in response to the…
-
Display on/off on home screen
It would be good if we can see which radiator is on or off without having to click into the room.
-
Unlock SRT manually
Would it be possible to allow a feature (that can be activated or not) to manually unlock the SRT using a 3 digit “code”. You could configure a code in the app and then input it using the SRT, turning it up and down in a certain sequence (like for safe) to input the code to unlock it when you don’t have your phone.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)
-
Away mode schedule
It would be great if Tado would support an away mode schedule: a schedule that only operates when away mode is triggered, instead of the current single away mode temperature. My use case: due to dynamic energy pricing it is wise to start heating around noon, even if I'm away. But if I'm home in the morning than heating…
-
Hot water control when away
At present if your geolocation setting is set to away then the hot water status can either be on (constantly) or off. This does not work well if you have a regular heating pattern for water (say 3 times a day) and you are out during one time period which stops the heating cycle. It would be better to give an option to…
-
Multi home
Please will you rewrite the app so that you can use Tado in several homes from the same app using the same names, passwords and login details
-
Master temperature
I’d love it if there was a way to have a unified master temperature. It’s always baffled me why you would not have the option to set the temperature of the rooms/thermostat and then just alter the on off times.