-
POE ethernet
Make a power connection for the "Internet Bridge"using the POE option of a ethernet-switch. It will bee much easy to connnect the "Internet Bridge", just one wire. Best regard Peer Herbsleb
-
Electric underfloor heating on/off only
I understand that electric underfloor heating is not supported by tado. I was wondering however, for people who already have EUFH (eg in a bathroom controlled by a third party product) and are running a tado system controlling their various radiators, could they use a smart thermostat to control the EUFH. Using the normal…
-
Panasonic Peneloop PRO rechargeable batteries
Regarding rechargeable AA batteries, tado° advises to use Panasonic Eneloop NiMH 1900 mAh batteries. But there is a successor from Panasonic: Peneloop PRO Ni-MH 2500 mAh. They seem to be better, but the tado° helpdesk has no experience yet and suggested me to place this on this Community. Has anyone experience with this…
-
week week regeling in de schema's van de app
Gezien de kinderen om de week thuis zijn zou het handig zijn dit ook zo te kunnen programmeren in de schedules van de desbetreffende kamers in de app. Zo kan de verwarming in hun kamer de week dat ze niet thuis zijn op minimum worden gezezt, liefst automatisch.
-
Compatibilité ELM Leblanc egalis ballon icondens
Bonjour, Le Tado v3 n'est pas compatible avec les nouvelles chaudieres Leblanc. Le sera t il? Merci
-
Account
Vorrei suggerire l'opzione di avere nell account app tado un amministratore che abbia solo lui la possibilità di impostare i parametri dando la possibilita ad altri utenti della casa solo di attivare e disattivare termosifoni o condizionatori in modo che non vengano modificate impostazioni o cancellati dispositivi in modo…
-
Manual override notification
Please add a mobile notification when the temp is changed or turned on . As it would be very handy. I have a autistic child who keeps turning the wireless thermostat on an we don't notice till its too late Thanks
-
Entering your Energy IQ tariff with pence not pounds
Recording tariffs in the UK would be much more accurate if the app allowed pence/kWh rather than pounds/kWh???
-
Fenster offen bei Fußbodenheizung
Hallo, ist es nicht sinnvoller bei der Fenster offen Erkennung die Temperatur einer Fußbodenheizung runterzufahren anstatt auszuschalten? Eine Fußbodenheizung braucht doch ewig bis sie wieder anspringt?
-
Window open, show witch room window is open in with app
Nice would be to be omformed in Tado app, witch room detects window is open in. Right now message display: Window open, turn off heating
-
Geofencing able to adjust individual rooms
Would be a great feature if geofencing could turn on/off an individual’s room if they are not home instead of everyone having to be out of the house
-
Opening of Tado to other home automation systems (JEEDOM)
Hello, Thanks to the thermostatic heads, I have a temperature and humidity sensor in each room of my house I would like to be able to use this data to manage the speed of my VMC via my Jeedom home automation system A connectivity with Jeedom for this would be great (local API ?) Thanks Pierre
-
MFA - 2FA authentication for increased security
Hi, A bit surprised that no 2FA is offered/configurable for increased security when signing in and/or starting the application. (And possibly but overkill linking it to actions in the app (home/away, changing schedule, .....) Other smarthome apps - MyQ, iRisco, Ring, ..... - all have (added) this feature to avoid…
-
Standing charge for energy IQ
It is well know factor within UK for all the providers to charge daily charge (standing charge). Could you please include this option within Energy IQ to be able to set and see the graph with or without (with slider ON/OFF)to represent monthly charges. This will vastly improve accuracy or shown readings in correlation to…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Improve Scheduling Functionality
I think it would be amazing to see the following added to the Tado platform\app to improve functionality and usability. Multiple schedules - This improvement is a must, there needs to be an ability to have multiple schedules per room in place to allow users to manage heating in their homes for different times of the year…
-
Electric Radiator Element
There are Wifi controlled elements for electric radiators on the market so assume this is not an impossible request. However, it would be great for Tado to offer this option to link in with the main app (like the AC controls) which can offer heating to areas of a property where no wet heating system is installed. it would…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
Worcester Bosch Greenstar 4000 System GR4700iW 12 S NG system 12kw
I am planning on purchasing a new system boiler, Worcester Bosch Greenstar 4000 series 12kW its got some very good green features of being able to modulates down to 1.9kW central heating output. I also plan to have a 250L unvented tank. https://www.wolseley.co.uk/product/worcester-greenstar-4000-system-12kw/ The Worcester…
-
Choose if you want TRV to turn boiler on
I would like to have the ability to disable a TRV turning on the boiler when room temperature drops below its setting. This would allow service engineers to flush the heating system without the boiler being turned on. It would also allow the TRV to act in “dumb mode”, stopping a room from over heating but stop it being…
-
Much better support for making a regular water-based underfloor heating system to smart
Hey! It is really good about tado, that you can make your regular radiator into a smart radiator with a device without having to change the system or even call a repairman, but I feel to make a regular water-based underfloor heating system smart by tado is much more complicated. I think I have a typical setup: The easiest…
-
Opentherm : Visualisation of all of the command sent and received by TADO
In TADO pro APP it would be great to see what actually TADO is sending to the Boiler and also the data that TADO is receiving ans needs. I would help greatly to analyse the flow of data back and forth. I am sure that those data are available and used by TADO for Service. There should be also a log file somewhere but I…
-
Set Max opening on thermostat
I would like to be able to set the max opening to ex. 40% for a thermostat. As it is now, the thermostat often opens 70-100% which results in very high return temperatures on the water. This is a problem because I pay an extra fee if I send 40+ degree hot water back into the public net. It would help if I could control the…
-
Integrate with "Loop" or add smart meter display
My Smart Meter display is ancient, I installed "Loop" which clones the display, and I now have easy to read information that will track tariff changes on my phone. If TADO included "Loop" integration with the IQ feature it would be brilliant.
-
Smart Profiles for Rooms
What do I mean? Some of our rooms aren’t used much. For example the guest room. But when someone visits it’d be nice to switch that room to a saved profile, rather than create it from scratch, and then delete it again after the guests have left.
-
Saving Smart Profiles
I know that “Home” and “Away” are basically profiles but I think it would be useful to have more. For example I’d like to save my current settings as a “Winter” profile.
-
Labels for devices
I have a single room (the kitchen) that has multiple radiators in it. I have smart switches on all of them. It would be useful to label the switches, ie “Radiator By the Window”. That way when the battery is low it is easier to know which one it is.
-
Modalita away programmabile
Modalita away programmabile giornalmente come avviene per la modalità home
-
"away" setpoint range
Use tado to run Samsung heater pump. Wish I could set away setpoint as low as 8C. 8C is the Samsung remote control lowest setting. As of now I make a time program, which in intervals 24/7 switch on and off the heater to average the temperature and keep room frost free.
-
Custom Boost Settings
Could you please add the ability to set a custom time and temperature to the Boost Heating All Rooms function. Unfortunately a Boost for 30mins at 25deg doesn't even get my house close to 18deg during cold days. Having to either remember to hit Boost again at 30mins or go through every room thermostat to set individually…