-
Outdoor temperature/humidity sensor
Why not an outdoor sensor ? It would be nice to have that in the same app and also it could be used to have a better weather adaptation on locations that are not covered.
-
Heat hot water on return home
Idea: I have my hot water set to heat 2x per day - 1 in morning and 1 in afternoon Sometimes I’m out in the afternoon when my water is scheduled to heat. An awesome feature would be, if I’m out when the schedule block occurs, and geo fencing means my water is turned off, when I return home again the water should be heated…
-
Tado Feature Request: Authorize by Room When Inviting a User.
Hi Everyone, I am a landlord. I have installed Tado in my family home and in my tenanted HMOs (Houses Of Multiple Occupancy where several tenants live under one roof, have their own privet rooms, and share communal rooms, such as ith=chens ad lounges). I have spent about £5K so far on Tado devices. I am delighted with the…
-
Better Siri Integration
Hey Siri, boost heating Hey Siri, boost heating for an hour
-
Notify TRV may not be seated correctly
I failed to correctly refit a trv following some decorating. Since by default (pin up) means valve open, the radiator would get hot when tado was set to be off. Tado should be able to identify the increase in temp repeatedly/consistently coinciding with the central heating being active when trv is set to be off. This…
-
Boiler Protection
As many combi boilers continue to run even after shutting off (to prevent internal overheating) Would it be possible to add a feature where you can select a room to act as a bypass valve. This would be as simple as when the command is sent to the boiler to turn off, the nominated valve opens to prevent possible damage to…
-
Hot water
You should be able to see from the app if there is hot water, when the boiler is calling to heat for hot water.
-
Backup settings
Problem - other members of family mess up carefully programmed heating schedule. Solution - access rights of other users limited or way to restore backup settings to revert to original schedule.
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.
-
Current temperature on TRV when in child lock
I was surprised to see that when the Child Lock is set on the Tado TRVs, you can't get the current temperature to show. When you physically touch the unit it shows the target temp but not the current one. It would be really useful if you could add this, as it saves opening the app for the current temp.
-
Add choice in default setting when battery is dead
When the battery dies on the v3 thermostat the Central heating goes full on. If your not home to notice this in time you might have a big problem, or at least a free sauna. The normally open or normally closed mechanic inside should be changeable. I understand that heating in nordic countries might prefer to have to more…
-
Make the "energy savings" report more honest
The energy savings report trumps the times where, implicitly, the system has saved money, or meant the heating was on less. However, it doesn't include the times, or nett out, when the heating was on unnecessarily due to Tado pushing users to turn the heating on in already warm enough rooms (i.e if the temperature is…
-
Talk to customer services
Hi, it’s great that you have the website and the chat link (which isn’t open late hours to support people outside of their working day) so that would be better improved if it was open until 8pm say or even 9pm week days and weekends. I much prefer talking to someone when there is an issue or question, I’ve sent questions…
-
Please add the heating intensity to main screen
Please add the heating intensity to main screen.
-
Energy IQ long free trial for cost of living crisis
Has Tado considered offering an extended free trial for Energy IQ this autumn to help people manage energy use during the cost of living crisis? Something like a 3 month trial would help, and might result in more paying customers long term. Also, is it worth revisiting suggested temperatures from both a climate crisis and…
-
Enable manual override timer when 'Turn off all rooms' has been enabled
I am writing this as the 'Turn off all rooms' button looked really useful but then if someone turns up a rad it will just stay on rather than turning off again in line with the manual timer selected. For example select 'turn off all rooms' in summer and if there was a particularly cold room or cold night then anyone in the…
-
Always on display for wireless smart thermostat
Please enable the feature to allow always on display of room temperature?
-
Temperature limit on thermostats
Hallo, Is it possible to make the maximum temperature of Tado thermostats (currently 25 ºC/77 ºF) adjustable? Of course my question is related to the climate crisis and the current energy crisis in Europe. Some people do not save energy and their energy use has become extremely expensive. I'm looking for ways to limit…
-
Lock Set temperature limit peer room
Lock Limit of set temperature - bearing in mind global warming, as well as useful functions: the application lacks setting the maximum temperature in a given room, it is about manually setting to Smart thermostat and Smart radiator to, for example. The maximum possibility of setting the temperature was in the application…
-
App emergency push notification when bridge connection goes down
When Tado bridge loses connection with the cloud, and thus the mobile app please can the app push a notification to alert the phone user that something has gone bad with the Tado install so that we can fix it ASAP. Examples being no hot water or heating stuck in ON mode if the disconnection has happened whilst asleep.…
-
Longer graphs?
1) Show all devices on a single page in a graph 2) Show the graph as above but showing 1 week, 1 month etc intervals? 3) is there an external Tado device that can be installed to indicate the true outside temperature/humidity? 4) Can the graphs be printed?
-
Spread temperature range on Tado smart ac control
hi, I have a problem with Smart AC controls funcion. I have an vacation apartment that is heated by AC, and in winter time we set +8C on AC and leave it for whole season, with Tado smart AC I can heat min. to 16C that is too much for me, all I need is frost protection, or to set lowest heating temperatre. Could you spread…
-
Heating icon for rooms on the main view
It would be nice to add a heating icon (similar to what you would see when you tap on a room) to each room on the main view (where all rooms are listed) in mobile apps. When there are many rooms on the main screen, it is hard to say which ones are being heated. I have to compare the current temperature with the programmed…
-
One-click hot water control with 'turn off water' and 'resume schedule' button
I use the mobile app to control my central heating and hot water system. I don't use geofencing as my wife often leaves her phone at home. I do however frequently use the option to 'Turn OFF all rooms' and then 'Resume schedule' later. I would really love a similar option to 'Turn OFF hot water' and then resume the hot…
-
Please allow me to access my data
Hi, I would like to create different analytic charts from the ones you supply. Please can you give me a way to access my data so that I can download it and create those. The key one I want is a chart to overlay all of the my rooms over each other and see which is the coldest - so I can figure out why and fix it. thanks,…
-
Energy IQ - Usage is not based on actual meter readings
We were away from home for about one week and wanted to try an experiment with usage data. Our heating was in away mode throughout and did not switch on. I submitted regular meter readings within Energy IQ at the start of April, then on the day we left, and as soon as we returned, and on the following day. The meter…
-
TADO heating/hot water controller error messages - viewer
We have been using TADO for 2 years, and recently upgraded with a TADO Hot Water/Heating controller unit. The installation was done by professionals, and it all works... .. Except that the unit has the triangle warning light almost permanently on?! No amount of fault finding and re-checking can seem to diagnose why it is…
-
Portrait graphs
Please make the temperature graphs visible in portrait mode too, now I always need to rotate my phone in order to see the graph - this is quite annoying. For the rest, keep it up! Absolutely love the product, the installation manual, the software, the app, it’s a great product :)
-
UX improvement: long-press
Would be very nice if the iPhone app allowed me to “long-press” on a room to quickly turn the heat off or resume its schedule.