-
Add timer option to Geofencing option
Add a timer option to the Manual select Home / Away Geofencing options, so that you can override any devices that are reporting as home but are not at home for a specific time length or indefinitely and on the flip side ignore devices that are away. But after the timescale is up go back to manual mode ;)
-
indication that the heating boiler is running
on the app main screen showing rooms another box saying if boiler is active or not
-
Offer a cheaper radiator valve.
In rooms where a wireless temperature is used as the control device there is no need for the SRVs to be able to sense temperature. Why not offer a cheaper version which only opens and shuts the valve as demanded by the wireless sensor.
-
Control zone valve and boiler with receiver? (Underfloor and radiator zones)
Hello, This is a new system we are setting up as we have just done an extension with underfloor heating and fitted a new boiler. We have underfloor heating one large room(the extension) downstairs and then radiators in other rooms. We have 2 zone valves installed, one for the underfloor heating and one for all radiators.…
-
Energy IQ tariff information
Energy IQ is only useful if it is accurate, and it's accuracy is dependent on the information you supply it. Currently tado is asking for the price in £/Kwh when gas is costed at p/Kwh. The app does not allow the cost in £/Kwh to be given to 4 decimal places to allow for more accurate cost estimates.. It should be fairly…
-
[Bug] Getting invited to another home locks you out of your own
I bought a Tado for my mother, to control a flat with rented rooms. She is never home, and constantly asking me what's going on. So I figured, hey, even if I don't live there, let me join your house so I can check myself. Who could have figured that this would lock me out of my own home! Even worse, trying to "get out" of…
-
Anthracite RAD Thermostats.
Got two lovely anthracite rads in my house but don't want to add white rad thermostats on them. Good idea? Some other colour options would be good.
-
Maintenance Service for improved longevity and reliability
I have used Tado throughout my home since mid-2017. It has always gobbled batteries; around 200 in that time (although there is always plenty of battery life remaining when they don’t have enough oomph for the SRVs, and I recycle them for other equipment; the low battery warning email always says that Tado is working to…
-
Selección retardo cierre válvulas
Buenas Creo que sería muy buena implementación poder elegir en la app el orden preferencia entre la señal en el relé del termostato sobre el cierre de la válvula de los radiadores. Esto sería para cerrar antes la entrada de agua general mediante la señal de las válvulas y después las propias válvulas inteligentes, así…
-
fonction anti vol
Bonjour, Nous avons des chambres en location court séjour. Vos thermostats se déclipsent bien trop facilement, un système de verrouillage est indispensable pour nous car ce matériel est fragile et couteux bien cordialement
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler
-
2 steps verification
Hi, I am wondering if you are implementing two steps verification soon? Thank you!
-
Room view: change from tiles to list
Hello I have several rooms, and floors, and I find since the early days that the tile view is quite confusing. I always waste time in finding a specific room. There is a lot of screen space wasted, so I must each time scroll down. On top of that the colour codes and why and how a tile would change colour remains unclear to…
-
Group Adapters
Like most folks, I heat certain rooms in the morning, certain rooms during the day and certain rooms at night. I should be able to merge adapters into a group and be able to turn on, off and set temps at a group level
-
Heating Bills For Oil Heating Systems Inc Hot Water
Can a modification be made to the usage tracking heating bills to include the option for oil heating systems. Also, there should be a breakdown of usage by hot water which there currently isn’t. If you do enter data from your usage the system does not calculate based on actual usage data and seems to estimate it. This in…
-
Send notifications when firmware downloads taking place
Recently at 04:00 all my tado devices disconnected from the internet and all smart radiator valves turned to off. During the day various devices reconnected then disconnected again. On investigation I found the Smart valves were being updated with new firmware. On continuing tado I was told that firmware updates can…
-
Tado Windows Desktop App
Does this exist or are there any plans to create one? Personally I still find it easier to manage things on a desktop / laptop than a phone screen.
-
Géolocalisation status on Alexa routine
Hello, I want create a routine on Alexa with the status géolocalisation tado. No possibility to change the status. No possibility to test the status on automatic routine
-
Cylinder, stat
Hi does anyone know if there will be a Tado cylinder stat in development?
-
“Saved Schedules” Idea
Hello, I have seen some posts about shift workers. To echo these. The way of editing schedules is very fiddly and time consuming, especially when you have a different shift pattern each week. It would be more beneficial to have “saved bank” of specific days and specific weeks you work, and you can quickly copy them into…
-
Smart AC control V3firmware 103.3 does not support quiet mode
2 x Panasonic AC & 1 x mitsubitshi A-A, all with quiet mode, which is one of the reasons they were bought. unfortunately Tado seems not to be supporting "Quiet mode", lowest setting on the fan speed does unfortunately not do it. request for this feature has been going on since 2021, how long time will it take to fix it ?…
-
Smart light switches
Hi Loving my tado system and progressively getting more and more smart items in my house. I currently have tado, another company smart door bell and robo vaccume. This now takes 3 app to administrate. My next smart desire is smart light switches. I don't want bulbs as switches need to be permanently on. I would of thought…
-
Cooling for underfloor water systems
I have "centralized" machine for deliver heating or cooling (according to what it is configured by building manager). I am asking to include some kind of software switch to change between winter and summer mode, just to be able to manage cooling underfloor water system (set 25ºC temperature as a target and achieve it while…
-
Responsive User Interface
The User Interface should be responsive to ensure it renders correctly on all screen sizes maximising the resolution to ensure the best possible usability. When programming complex schedules it's much easier to use the web interface on a PC or Mac where you should have the benefit of a large screen showing the full smart…
-
Duration for manual control through thermostat
I would like to set, using the app, the duration of the manual temperature control activated through a thermostat. I would like to choose between until you cancel until you resume schedule until the next time block Right now, there is no choice and "until you cancel" is the only behaviour.
-
Add imperial units to measurement options in EnergyIQ
Older style meters (pre-smart meters) still provide meter readings in imperial units - cubic feet. This means customers without smart meters cannot use the EnergyIQ, because it only allows you to add meter readings in cubic meters (new style meters).
-
Wireless Receiver - status and history in application
I would welcome to see actual status (on/off) of Wireless receiver and chart with history in the application and web.
-
Timed Boost Function with a physical button
Hi All, would it be possible with a firmware update to setup the button on the thermostat to act as a boost button also. Its more for the older generation who find navigating mobile phones a pain. I have been looking into using a smart switch and IFTTT to try and mimic this boost function but can not. Although I have got a…
-
Internet bridge improvements
Any chance you could add the ability to use two different internet bridges on the same account as I can only position mine at one side of my house or the other and it occasionally leads to loss of signal at some of my thermostats. Either that or create a new internet bridge with a stronger signal so that it reaches farther…
-
Change room colour in app when heating
Can the app be changed to highlight those rooms that are heating