-
Away by individual family member
I would like to be able to set different away settings for each room by family member. I have 3 scenarios: 1. Both my wife and I are home: Both our office rooms we are using for homeoffice should heat. 2. I am home, my wife is not: Only my office room should heat. 3. I am out of home but my wife is home: her office room…
-
widgets
Sería bueno tener la opción de activar un widgets en el teléfono para tener acceso directo a la temperatura de una habitación.
-
Unified schedule view
Please could you consider creating a unified schedule view for all rooms and their schedules to allow for bulk editing and copy/paste.
-
Range extender
I'd like to have a range extender for my tado products, so when my bridge can't reach all Tado units, I can put a device in between that will repeat the signal. One solution could be a repeater, like IKEA has for their Tradfri line. Another option would be to switch modes on a bridge, so it could be used as a secondary…
-
Configurable schedule
Currently we can have 1 schedule for all days of the week, 3 schedules: weekdays & Saturday & Sunday or 7 schedules: every day separate. Can we get a way to define this in a custom way? I work from home 4 days a week, so to be able to schedule those days separate from all other days would be so much more convenient! It…
-
Wifi geofencing
It would be good if there was WiFi only geofencing. There is not point to keep GPS up whole day and drain battery. I know it would limit app to on and off rather than vicinity check but there is few benefits for me from GPS geofencing as home members keep turning GPS off to save battery life thus geofencing do not work as…
-
Different houses
I would appreciate to be able to manage my 2 houses from the same app and account. Currently this is missing
-
Temporary heating schedule option
On the tabs for heating such as the days the ability to create a temporary schedule for the day and if I need to do it again I could select the option as it would be perfect for days when I need to give my baby a bath.
-
Boiler service logs/recording
Add boiler maintenance recording to the care & protect tab with reminders for servicing due.
-
Day off schedule override
Enable an option to override general calendar to be used when a bank holiday or a day off. I currently use the away option and play around with temperature, but that does not look like a clean solution. Also, enable not only a temperature pattern but also a day counter… something like “override official schedule during x…
-
Temperature slider should not jump to a certain position but slide from current temperature
There has been an unwanted design change in how you change the temperature in a room with the room temperature slider. In previous versions of the Tado app you could place your finger on the slider and subtly slide the slider half a degree or other amounts up or down. Now, when you place your finger on the slider, it…
-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
Local control - not internet dependant
Given that other Smart Home products (Aqara for insurance) can now work without the internet, than it's about time Tado mixed with the times.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??
-
Ability to weight the heating across multiple radiators in a single room
I would like to be able to disable one of the radiators in my living room when, for example, we have a Christmas Tree in front of it and rely on the remaining radiator to heat the room.
-
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode also ability to remove the heat mode displaying from the apple home app
-
display changes made via app or siri on tado smart ac control unit
display changes made via app or siri on tado smart ac control unit
-
mode control via tado smart ac control unit
pls allow to control cool/dry mode
-
fan control via tado smart ac control unit
pls enable fan control on tado smart ac control unit (speed and louver/swing if possible but at least speed)
-
Viesmann DHW Control - Set Temperature in ECO mode
I have Viessmann Vitodens 100-W B1kF connected via OpenTherm to a Wireless Receiver (EU) version. There seems to be a problem with DHW and I would like to share my experience after investigating and talking to Tado about it. I hope this suggestion will help others so that maybe Tado implements it. Situation Viessmann has 2…
-
Energy IQ Improvement - independent TRV
Hello, A bit of context first. I moved into a new house and went all in with Tado products to make heating easier to manage this winter. My setup is as follows: Ground Floor has underfloor water heating and 2 Tado wired thermostats (Kitchen and Living Room) Upstairs has 4 Tado TRV (Bedrooms and Bath) + 1 additional…
-
Slim schema koppelen tussen ruimtes
Zou het niet handig zijn als je het slimme schema van de ene ruimte kan koppelen aan de andere ruimte. Meestal zijn er verschillende ruimtes in een huis die op dezelfde tijdstippen verwarmd moeten worden. Is ook handig als er meer dan 7 radiatoren in één ruimte zijn. Dan kun je de ruimte virtueel splitsen op deze manier,…
-
Show the wireless receivers ON/OFF graph
A single TRV can call for heat all night. And the only way to check that is to go into every single TRVs graph. Which can be many!
-
Show an overall ON/OFF graph
Show and overall ON/OFF graph that shows all thermostats. So that you can see what has been calling for heat. It will help with optimizing the schedule.
-
One-off schedule
Hi, Would like to be able to overwrite the programmed schedule, but in anticipation. Ie if I know that tomorrow morning I will have to wake up 1hr earlier than usual, I'd like to preschedule my heating to go on 1hr earlier, but not have to adjust my regular schedule as it's for 1 time only. Right now, I'm only able to…
-
Hot Water button irrelevant
Hi, I'm using a separate boiler for my hot water (heat pump), not connected to the burner I'm using for my heating. As such, the hot water function is irrelevant and I would like to make the button disappear from my home screen. I also had to create a schedule for the hot water to be "always off". It would be much simpler…
-
Sunday Mode / Home Sick Button
When a person is off sick or the family are home during Monday to Friday the room schedules have to be updated individually. A new button like boost heating but labeled Sunday mode or sickness emoji will default all schedules to Sunday for x number of days. The button should deactivate when you hit reschedule button
-
Multiple Internet gateways
My Internet gateway failed to get a reliable signal to a radiator valve through a single wall. Can we have either multiple gateways or use the normal house WiFi instead in order to fill in dead spots?
-
My experience of buying Tado
I am truly amazed how easy and straightforward it was to swap over my existing system to the Tado Starter Kit V3+. Right from the start, after scanning the QR code to download the app, making an account and preparing for the installation, this was a very well illustrated, easy to follow installation process. Once the right…
-
How to improve tado? Hint - it's not product development.
I've been a tado user since its UK launch, running a v1 product that over the last decade, has been pretty stable. My own tado experience? Meh, it's a central heating thermostat, and it almost always does what it's supposed to do, and pretty well too. So why have I still not installed the replacement v3+ I bought over a…