-
Target flow temp chart
Hi. I would love access to a target flow temp/time chart. I believe it would be useful data to maximise efficiency. In my case, I had a room with an undersized radiator. On days that this room was used and significantly higher flow temp was required to maintain that room’s temperature. I came across the problem by chance…
-
Individual geofencing
I recently bought 4 Tado radiator valves for my home and was under the impression that I could individually geofence these. For example, I work from an office 3x per week and on these days I was hoping for the Tado radiator valve in my home office to recognise I’m away and not heat the office, whilst the rest of the house…
-
Allow a range of temperatures for a schedule (e.g. "comfort enough")
Add an ability to define temperature in a schedule as an acceptable range. E.g. in the morning heat to 20C if it's lower than 19C. This could be useful in many scenarios. For example, your room is already at 19.5C, and the schedule says 20C. There's no need to run the boiler to heat it for 0.5C more. Especially if it's a…
-
Night mode for wireless receiver (no lights)
We have installed the wireless receiver in our son's room replacing the previous controller that was placed there. Everything works fine but at night the lights are like so: We need a blackout room for our son to sleep (he is nearly 2 years old) and these lights unfortunately keep him awake. A feature I would like is to be…
-
Smart Schedules Profiles
As a user I want to be able to have multiple smart schedules that can be assigned to rooms without having to copy and paste. For example, I want a Smart Schedule for summer time and another one for winter time without having to tweak the temperatures or, for example, turn off a room, the office, while I am on vacation.
-
Energy IQ in tado web app
Hi, I'm a user of both the mobile and web apps. Would you consider adding the Energy IQ info in the web app as well? For this particular section, I always have to switch to the mobile app. This is the current dialog in the web app that appears when you click Energy IQ. The display space would also be more generous in the…
-
Retaining screw on smart rad valve.
The smart Rad valve needs a retaining screw. This would stop people from accidentally unclipping the head from the screw on base while twisting the top.
-
Custom name per device beside room name
Currently any device has the name of the room and a non descriptive id. To be able to identify for example the device with low battery it is useful to get a notification for a device with clear name (e.g. under window radiator, bedroom 1, bedroom 2)
-
Temperature slider should not jump to a certain position but slide from current temperature
There has been an unwanted design change in how you change the temperature in a room with the room temperature slider. In previous versions of the Tado app you could place your finger on the slider and subtly slide the slider half a degree or other amounts up or down. Now, when you place your finger on the slider, it…
-
Viesmann DHW Control - Set Temperature in ECO mode
I have Viessmann Vitodens 100-W B1kF connected via OpenTherm to a Wireless Receiver (EU) version. There seems to be a problem with DHW and I would like to share my experience after investigating and talking to Tado about it. I hope this suggestion will help others so that maybe Tado implements it. Situation Viessmann has 2…
-
How to improve tado? Hint - it's not product development.
I've been a tado user since its UK launch, running a v1 product that over the last decade, has been pretty stable. My own tado experience? Meh, it's a central heating thermostat, and it almost always does what it's supposed to do, and pretty well too. So why have I still not installed the replacement v3+ I bought over a…
-
Network Strenght
A way to see the network strength for the thermostates in the app would be nice.
-
Location based on wifi network
At the moment the location is based on geo location of your phone. Wouldn’t it be nice to have the option of basing your location on when you phone connects to your wifi network? Or at least give you the option to pick between those two option
-
Improve “Open Window Detection”
In a room with active "Open Window Detection" I opened the window while heating was off in the current schedule slot. The open window was not detected and the heating turned on with the next schedule slot a few minutes later. The detection should work regardless of the current state of schedule as long as heating is not…
-
Outdoor temperature/humidity sensor
Why not an outdoor sensor ? It would be nice to have that in the same app and also it could be used to have a better weather adaptation on locations that are not covered.
-
Heat hot water on return home
Idea: I have my hot water set to heat 2x per day - 1 in morning and 1 in afternoon Sometimes I’m out in the afternoon when my water is scheduled to heat. An awesome feature would be, if I’m out when the schedule block occurs, and geo fencing means my water is turned off, when I return home again the water should be heated…
-
Tado Feature Request: Authorize by Room When Inviting a User.
Hi Everyone, I am a landlord. I have installed Tado in my family home and in my tenanted HMOs (Houses Of Multiple Occupancy where several tenants live under one roof, have their own privet rooms, and share communal rooms, such as ith=chens ad lounges). I have spent about £5K so far on Tado devices. I am delighted with the…
-
Better Siri Integration
Hey Siri, boost heating Hey Siri, boost heating for an hour
-
Notify TRV may not be seated correctly
I failed to correctly refit a trv following some decorating. Since by default (pin up) means valve open, the radiator would get hot when tado was set to be off. Tado should be able to identify the increase in temp repeatedly/consistently coinciding with the central heating being active when trv is set to be off. This…
-
Boiler Protection
As many combi boilers continue to run even after shutting off (to prevent internal overheating) Would it be possible to add a feature where you can select a room to act as a bypass valve. This would be as simple as when the command is sent to the boiler to turn off, the nominated valve opens to prevent possible damage to…
-
Getting most out of your heating system. New Tado device.
Getting most out of your heating system. New Tado device. I was inspired to write this article after reading “Add max. valve opening on thermostats!!” by cjp https://community.tado.com/en-gb/discussion/14775/add-max-valve-opening-on-thermostats I have been working on these issues for hours and days. Optimizing my heating…
-
Backup settings
Problem - other members of family mess up carefully programmed heating schedule. Solution - access rights of other users limited or way to restore backup settings to revert to original schedule.
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.
-
Current temperature on TRV when in child lock
I was surprised to see that when the Child Lock is set on the Tado TRVs, you can't get the current temperature to show. When you physically touch the unit it shows the target temp but not the current one. It would be really useful if you could add this, as it saves opening the app for the current temp.
-
Add choice in default setting when battery is dead
When the battery dies on the v3 thermostat the Central heating goes full on. If your not home to notice this in time you might have a big problem, or at least a free sauna. The normally open or normally closed mechanic inside should be changeable. I understand that heating in nordic countries might prefer to have to more…
-
Make the "energy savings" report more honest
The energy savings report trumps the times where, implicitly, the system has saved money, or meant the heating was on less. However, it doesn't include the times, or nett out, when the heating was on unnecessarily due to Tado pushing users to turn the heating on in already warm enough rooms (i.e if the temperature is…
-
Talk to customer services
Hi, it’s great that you have the website and the chat link (which isn’t open late hours to support people outside of their working day) so that would be better improved if it was open until 8pm say or even 9pm week days and weekends. I much prefer talking to someone when there is an issue or question, I’ve sent questions…
-
Please add the heating intensity to main screen
Please add the heating intensity to main screen.
-
Energy IQ long free trial for cost of living crisis
Has Tado considered offering an extended free trial for Energy IQ this autumn to help people manage energy use during the cost of living crisis? Something like a 3 month trial would help, and might result in more paying customers long term. Also, is it worth revisiting suggested temperatures from both a climate crisis and…