-
Relay modules (1/4/6 channel)
Now, if we vant to create heating zones (with a pump or Underfloor heating manifold), it need a wired thermostat each zone and same number of wireless temperature sensor. It really expensive and we need buy a device that we not use 90% of it abilities... (wired thermostat, we use it a simple relay mode, not measue…
-
Boost heating - timer
Boost Heating - timer Can you please add a timer for the Boost Heating Timer to the application? example. it's not so cold at night that I want to heat the whole night, the heating is set to off, but I would like to turn on Boost Heating for 30 minutes at three in the morning, for example, and then switch the heating…
-
Network Strenght
A way to see the network strength for the thermostates in the app would be nice.
-
Ticket system for support
Have searched but only reference I can find is someone who suggested but it was never actioned. Issuing a ticket works well on other sites and enables tracking of a question. I made request for support days ago and received no response. Only means I have of chasing this is repeat the original request. For me the present…
-
Inputting heating bill for oil kerosene top up.
Is it sensible to firstly input the previous year's oil consumption and average price before we input the last heating bill. Do we use units ie is a unit a litre. Oil is 10kw/litre or is a unit a kw? What's anyone else doing? I have asked via the bot but not got an answer yet.
-
Dual SRV Offset
I know that the Smart Radiator Valve offset issues have been discussed extensively but I would like to offer my 2 cents. In one of the rooms in my apartment, I have a tado SRV installed and I also have a room thermometer. I check their measurements from time to time and when not heating they are very close to each other…
-
Disable Away mode when thermostat is scheduled to Off
When thermostat is scheduled to Off and I leave home, it switch to Away mode and start heating when temperature is lower than set in Away mode. This is the wrong logic for how this function works. When the schedule is set to off, the thermostat should not turn on when I am not at home.
-
Names, notes and status
It would be useful, at least to me, to be able to give a name/location note to each individual Smart Radiator Thermostat and I would also like to be able to see the open/closed status of each SRT.
-
Location based on wifi network
At the moment the location is based on geo location of your phone. Wouldn’t it be nice to have the option of basing your location on when you phone connects to your wifi network? Or at least give you the option to pick between those two option
-
Font sizes on Home screen
font sizes for room names and temp settings too small - seems to me there's enough space to make them more easy readable.
-
Expose the Tado Smart Radiator Thermostats sensitivity setting in the app.
I have multiple Tado products. Also, I have 5 Smart Radiator Thermostats; they only work if the heating is at max and the heating flames are at 3. I spoke to support and they told me that they could make a change in the setting to the Smart Radiator Thermostats and set the sensitivity to low so that when heating is showing…
-
Temperature alarm
It would be good to be able to set alarm if the real temperature is not following scheduled temperatures. Then we would be able to react. Best regards
-
Connect Energy flip and Tado.
By connect Energy flip and Tado, tarifs and gas/electricity consumption can be synchronised. This will improve both apps.
-
Tado door sensor - security alarm
Think there is a big market gap for a Tado door sensor & home security alarm. That can build on the home away function of Tado.
-
Individual Room ‘advance’ option
I can’t find the roadmap but has it been considered to add an advance option for individual zones to either advance from off to on, or on to off. Or allow the boost function for individual zones, rather than to current option to boost all zones?
-
POE option in Bridge
As the range of the bridge is a bit limited, a Power over Ethernet option in the brigde would be very handy. Then you are more flexible to bring power and ethernet to the bridge at a central place in the house.
-
child proof fixation of the radiator thermostat
The radiotor thermostat comes loose way to easy. My 14 months old kid had it loose in no time. What is the point of having a child protection mode in the software, if the hardware is not child proof.
-
Bridge not in pairing mode by default
The bridge is by default quite slutty; always in pairing mode. No need for that in my opinion. This could just be turned on when you want to add a device. Some background: One of my devices was connected to the bridge of the neighbours. They did not turn off their pairing mode.
-
Improve “Open Window Detection”
In a room with active "Open Window Detection" I opened the window while heating was off in the current schedule slot. The open window was not detected and the heating turned on with the next schedule slot a few minutes later. The detection should work regardless of the current state of schedule as long as heating is not…
-
Quick on off button per room
Hi! The Tado app mainscreen already features a on/off button pictogram on each room. I would love for them to work as on/off buttons too! So you can resume schedule or stop heating a specific room with just one click.
-
Smaller wireless Thermostat
Your platform desperately needs a smaller wireless Thermostat. I just watched a review of a competitor and they offer one. You need a wireless Thermostat with no controls that simply reports the temperature in a room as your TRV are hopeless at reporting the true temperature This other platform offer a stand alone…
-
TRV with empty batteries closes valve, but keeps requesting heat
The batteries of my TRV were empty and I received this email from Tado: > When your Smart Radiator Thermostat does not have enough charge to function, it will automatically close the radiator’s valve and the heating will remain off until you replace the batteries. Sure enough the valve was closed and an empty battery icon…
-
Allow the setting of a specific end time when manually overriding.
Dear Everyone, Allow the setting of a specific end time when manually overriding. The way our family uses our house means that having timed heating makes no sense, so we have that effectively disabled by setting one time period for 24 hours at a low temperature (10C). We control individual rooms by overriding this…
-
Interface (Home Screen)
Hi, after a couple of week using Tado, I have some suggestions :-) 1) make it possible to choose a day of the week and see the day schedule of the devices 2) increase the font size of 'set to/heating to' information 3) add the humidity % to the buttons (also in readable font size) 4) add 'HOME/AWAY' button at top of the…
-
Full API release - Open source
API Release: One of my major concerns I have is I am now very reliant on the Tado eco-system. My concern is that at some point in the future the tado bubble may burst and their cloud services stop functioning. This will not only mean I cannot enable my heating but the entire eco system will fail. The improvements coming…
-
Enable Tado to use other temperature sensors via HomeKit
It would be very helpful if Tado could utilise existing temperature sensors that are also connected via HomeKit. I have several existing temperature sensors in my house(e.g. Netatmo) and don't want to have to buy additional Tado ones simply to get meaningful room values to control my heating. The smart radiator valves are…
-
Energy IQ - Brennwerte & weitere Daten
Hi, zunächst mal: Die Energy IQ Funktion ist echt toll! Wir geben immer Kubikmeter-Werte unseres Gaszählers ein. Der Preis ist allerdings in €/kWh. Es wäre erstens toll, wenn man den Preis noch akkurater angeben könnte (in Cent/kWh bspw, und vor allem, wenn man die Brennwerte sowie Zustandszahl des Gasversorgers angeben…
-
Priority/importance levels.
I'd like some rooms (i.e. bathroom) to stay at some temperature over night but I don't mind if they are slightly more off the set temperature and I don't want boiler to fire up just for that room. It could be heated up when other room (i.e. master bedroom) needs to turn boiler on. Something like the temperature set to 'no…
-
samenwerking thermostaat & slimme airco bediening
Ik ben op zoek naar een mogelijkheid om mijn airco units slim te maken maar ook om deze samen te laten werken met de thermostaat. Bijvoorbeeld, ik wil 's morgens het huis opwarmen (o.a. vloerverwarming) met de CV ketel waarna ik het huis op temperatuur wil houden met airco units. Ik ga nu met home assistant beide…
-
Please fix the Energy IQ feature ...
Following on from another conversation here (and inspired by @eezytiger ) I checked with OVO as to how they are calculating the figures shown on their website. I put together this spreadsheet and, given the fluctuations due to the calorific value of gas, it seems to tally up. Now that I understand this, I can point out…