-
Simple UI improvements
Great system, nice app. Here are my suggestions on how you could improve the user interface (UI) in the mobile app for better usability and utility. In order of impact to the experience: Show humidity readings for each room on the Home view tiles - this would give more utility than the current solution - having to tap down…
-
Create more scenarios
Please create more scenarios than just “Home” and “Away”. Note how Philips Hue do it. Eg being away for just one day make you want to turn down the heat less than being away a whole week. Not having this option means you have to adjust the “Away” scenario all the time to fit your needs
-
Merged: Calendar
This discussion has been merged.
-
Indicate which device is the measuring device for a group.
When looking at devices in a group (room) could you highlight the one that is the measuring device (master), as distinct from the others (slaves)? This is under Settings > Rooms & Devices and/or place the measuring device at the top of the list.
-
Heating status for On/Off mode
I would prefer to see the heating status as a simple on/off symbol rather than the three waves. I have a heating source that does not support opentherm and thereby only works in on/off mode. Why I would need this: This would be useful to really check if my heatpump is working properly: I currently do not always know for…
-
Notifications for high and low room temps.
There have been a few occasions when a Tado smart radiator valve has come loose from the radiator and allowed unrestricted flow. This resulted in the room overheating. To identify when this happened used IFTTT to monitor room temp and alert me if they were too high or too low. I want to reduce my reliance on IFTTT and I…
-
Air source heat pump linked to UK's Octopus Energy Agile Tariff
Tado should add the ability to heat up the water cylinder using an air source heat pump based on the cheapest energy rate of the UK's Octopus Energy Agile Tariff. This could save lots of £. It would need some AI or the like to spot what is likely to be the cheapest rate for the day, though that may be quite stable and for…
-
Air Comfort telling me my room is too humid !!
The air comfort page on the app and website doesnt appear to be that intelligent. Its telling me various messages about ventilation and not drying clothes in the house and extractor fans etc etc. but what it doesn't seem to be taking into account is the outdoor humidity. for instance - in this screenshot its telling me my…
-
Tado Outdoor Weather Station
Develop an outdoor weather station that would be a similar design to indoor Tados. The product would track temperature, pressure, humidity etc. Could be a stand alone product for people that don't have Tado or a crucial part of the Tado eco-system for those that do. Failing that, partner with a leading weather station…
-
Simple, automated monthly export
Hi I know there are various requests around data export, but could you not provide a simple option that enables a monthly export of the data? this is easy to add, could be fully automated and the data file sent to the account holder by email or via a more secure link where it can be downloaded for say 7 days. Tado is a…
-
Hot Water control in Apple Home
Please enable a Hot Water control in Apple Home.
-
Make app developers to have multi homes into one account
Many Smart home Apps have multi home capabilities, for example my Kwikset App or My Tapo App allow me to control smart door locks or cameras in two different homes. Hence, this is not rocket science is an easy fix for the Tado App. So I hope is done soon
-
aircon control should be battery powered as per thermostats
I am disappointed that the aircon control needs continuous mains power and not battery as per thermostats
-
Smart meter integration
Smart meter integration for the uk market and maybe world wide for better understanding of energy bill within the app
-
Schedule by month/season
Ability to set schedules for a wider period than monday-sunday. If I cud set every day for the calendar year would be helpful/batch up months and seasons. Easier!
-
IFTTT trigger when termostat valves open, closes or passes a certain threshold
I would like to be able to make my smart home turn off my heat pump, when the desired temperature has been reached in the house. I currently use temperature thresholds, but it would be much simpler if Tado could trigger via IFTTT when valves on my thermostats open or closes. So bacically, a trigger if room "Living room"…
-
Manage email notifications
I suggest a feature to manage which email notifications to receive. Concretely I often receive emails like "Your Smart Radiator Thermostat needs new batteries" despite being plenty informed via the app - and there is, quite surprisingly, no option to unsubscribe. My proposal is to let the users decide which emails they…
-
Black TRVs
Id also like to see black edition TRVs from Tado. I'd buy around 10 if they were available. The photo shows why.
-
Open valve mode when system is off
During periods in which the system is off (I e. Summer), provide a function/button like "fully open valves", which behaves like the rocket 🚀 function, except it can be set for a longer period of time (even months). This way the water circuit is left open and the valve is not stressed because it's fully opened.
-
Room temperature calibration
You can set a temperature offset but usually the offset is different depending on the actual room temp - so offset usually is accurate for high or low temperature but not the other (due to non-linear temperature profile of the room from a point not near the TRV). It would be great if I could take the TADO wall mounted…
-
Ebus Max Flow Temperature setting (like the one just released for Opentherm).
Would it be possible to do the same for Ebus controlled boilers via the wired Tado, +- settings? My Vaillant can ramp up to 80C if it wants even if I set the max temp lower on the boiler. The ebus will ignore these settings and do what it feels is best. I might only want it to go to 66 or 70C max for example. It's just…
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler
-
Cylinder, stat
Hi does anyone know if there will be a Tado cylinder stat in development?
-
Internet bridge improvements
Any chance you could add the ability to use two different internet bridges on the same account as I can only position mine at one side of my house or the other and it occasionally leads to loss of signal at some of my thermostats. Either that or create a new internet bridge with a stronger signal so that it reaches farther…
-
Feature to turn off LEDs Internet Bridge
I like to have the availability to turn off the LEDs Internet Bridge.
-
Switch Home in the app
We have a Tado system at home and so have our daughters, but if I go and stay in her house I cannot just switch homes. The answer I got was to logout from my home and login with another email. So I need an extra email for Tado! Or buy an extra smartphone, even more stupid! Please make it possible to switch homes in the…
-
Entering your Energy IQ tariff with pence not pounds
Recording tariffs in the UK would be much more accurate if the app allowed pence/kWh rather than pounds/kWh???
-
Window open, show witch room window is open in with app
Nice would be to be omformed in Tado app, witch room detects window is open in. Right now message display: Window open, turn off heating
-
Integrate with "Loop" or add smart meter display
My Smart Meter display is ancient, I installed "Loop" which clones the display, and I now have easy to read information that will track tariff changes on my phone. If TADO included "Loop" integration with the IQ feature it would be brilliant.
-
Custom Boost Settings
Could you please add the ability to set a custom time and temperature to the Boost Heating All Rooms function. Unfortunately a Boost for 30mins at 25deg doesn't even get my house close to 18deg during cold days. Having to either remember to hit Boost again at 30mins or go through every room thermostat to set individually…