-
Simple fix for the smart TRVs
My smart radiator valves can’t heat a room without setting a large temperature offset due to the sensor being too close to the radiator. This feature doesn’t work very well because when the radiator turns off tado thinks my room temperature plummets, and then instantly turns the radiator back on. This seems to be a very…
-
Combining the best of Tado and Nest?
I realise the title of this post may sound odd or even controversial but here goes. My system is very conventional (read old fashioned) consisting of a 16 year old Viessman 100 WB1 boiler, gravity fed (tank in roof space) and I believe what is called a Y plan layout with separate two-way valves controlling the heating and…
-
Easy schedule or temperature change
Currently changing schedule is not that easy, we need to go through each device and each time block separately and then adjust it. Most of the time we want to change temperature level but each room might have different time schedule, then we always end up in changing one by one. This is really time consuming and tedious.…
-
Data & Analytics Room Selection
Would be nice to have a quick way of changing between rooms in the data and analysis section of the app. Currently need to go all the way back out and back into a different room. A drop down menu to change room would be nice
-
Export schedules and name devices
Hey, a couple of things I thought would be worth sharing that could improve the app/experience. 1) the ability to nickname devices within a room. I get the xxx needs new batteries email but don't know which radiator in the room. If I could nickname them I'd know which needs replacing easily rather than needing to check. 2)…
-
More compatible heat pumps
At…
-
Increase Zone Controller Max Rooms
I ran into the limit of 10 rooms on one Zone Controller and I need it set to 12 rooms. I am sure this has also affected other Tado users retrofitting a complete house.
-
Show current temperature on TRVs
Would it be possible to have an option to show the current temperature on the TRV? I have the child lock enabled on all my thermostats and when you spin the wheel it flashes the programmed temperature. It would be nice if there was a way to nudge the dial and display the current temperature without having to open the app…
-
Air Comfort telling me my room is too humid !!
The air comfort page on the app and website doesnt appear to be that intelligent. Its telling me various messages about ventilation and not drying clothes in the house and extractor fans etc etc. but what it doesn't seem to be taking into account is the outdoor humidity. for instance - in this screenshot its telling me my…
-
New Product - Tado Hot Water Cylinder Thermostat or Sensor needed
Tado already make a good range of Thermostats and Sensors to control the hot water flow to domestic radiators. However, in (the fair few) countries that rightly or wrongly use a hot water cylinder to store pre-heated water for use with domestic taps, Tado has no product available to support this. This means there is a…
-
May I kindly request you to stop using odd numbers on the Y axis of your graph?
I can’t believe you still ignore so many of your clients asking for an update on this feature since 2019. It’s quite easy to address the issue by either stop using odd values on the Y axis for temperature and humidity or, allow the user to manually adapt it with his own preferences. Sorry but having horizontal graduation…
-
Turn on radiator valve for maintenance
Not sure if this is already implemented but I couldn't find it. It would be nice if we can open the radiator valves for maintenance even if the temperature is way above 25º. I needed to manually open all the radiator valves for maintenance.
-
Comfort Zone - Change comfort temperature display
I find 20 degrees too hot for “comfort” and prefer to be able to adjust when it shows as orange and when it’s too cold or hot for ME. Comfort zone is a known Zone, not absolute and different for different people, what is hot for one person might be cold for another. Our comfort temperature changes in response to the…
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Smart meter integration
Smart meter integration for the uk market and maybe world wide for better understanding of energy bill within the app
-
Link with energy provider
I love that you can put your meter readings in to the app and see your savings but I will often forget put the readings in. The new reminder feature is good but would be amazing if I could link my tado with my energy provider so that it auto updates.
-
Black TRVs
Id also like to see black edition TRVs from Tado. I'd buy around 10 if they were available. The photo shows why.
-
Fix the geofencing functions that I pay for
I paid Tado so that my heating would use geofencing, well it does not. When contacted Tado say there is an issue but have not provided a resolution. First it was my partners phone that would not be picked up, so we changed the phone as there was another app with another issue. Her phone now works, but I don't see why her…
-
Responsive User Interface
The User Interface should be responsive to ensure it renders correctly on all screen sizes maximising the resolution to ensure the best possible usability. When programming complex schedules it's much easier to use the web interface on a PC or Mac where you should have the benefit of a large screen showing the full smart…
-
When heating a room, open valve in steps
When Tado heats up a room for example from 18c to 20c, it´s all or nothing. Because the valve is open all the way, it make a hissing noise. What if it opens in steps? That would minimize the noise coming through the valve. It´s not tado that is is causing the noise, but the valve being open full to reach the Temputure all…
-
Integrate with "Loop" or add smart meter display
My Smart Meter display is ancient, I installed "Loop" which clones the display, and I now have easy to read information that will track tariff changes on my phone. If TADO included "Loop" integration with the IQ feature it would be brilliant.
-
Labels for devices
I have a single room (the kitchen) that has multiple radiators in it. I have smart switches on all of them. It would be useful to label the switches, ie “Radiator By the Window”. That way when the battery is low it is easier to know which one it is.
-
Multi-room presets
I would love a feature in the app where various whole-house presets could be customised and then initiated at the touch of a button, creating different heating profiles for each room. For example, I would create a "Work from home" button that would turn up the heat in my home office to 20, and turn down the other rooms to…
-
Thermostat should measure humidity in a way that is not useless
Hi, I’ve been using my smart thermostat for a while on firmware 90.1. I have it integrated with HomeKit and as it turns out, using HomeKit (an advertised feature) completely breaks the humidity sensor (also an advertised feature). The humidity sensor is completely out of touch and only reports values every 5% change. This…
-
A configuration option to delay geofencing (returning home)
I propose a configuration option to delay heating (when automatic geofencing is used) when returning home. This could be useful for single person households where primary mode of transportation is cycling. Rationale: Most of the time I travel by bike. When I return home, heating is not necessary for about 30 - 60 minutes,…
-
Cheap Secondary Thermostats and Bridge extender
These are much requested features that I believe should be added.
-
Help make Tado better: Create subgroups in the forum and let Tado experts comment to content
As a newbie in the Tado world, I am confused by the lack accuracy, when I go through the complaints and problems. The smart radiator thermostats are often described as valves, and the discussions are further blurred by expectations to regulation performance based on a system with a boiler, while I have district heating,…
-
Individual geofencing
I recently bought 4 Tado radiator valves for my home and was under the impression that I could individually geofence these. For example, I work from an office 3x per week and on these days I was hoping for the Tado radiator valve in my home office to recognise I’m away and not heat the office, whilst the rest of the house…
-
Outdoor sensor
Outdoor sensor is excellent idea and a LCD wireless main panel tablet with all information on it , each room outdoor information and online weather from met office. Including usage of gas
-
TRVs recognising when a call for heat has failed
I got up to a cold house this morning. I looked in the app and all TRVs were “heating to 20°” however, despite it being 8.15am and my schedule being set to start heating at 6.45/7am all rooms were still only 16° or thereabouts. It turns out my combi boiler had dropped pressure resulting in the boiler being unable to fire…