-
Display must be on all the time
I would like to request tado to add continuous display feature which shows temperature or another animated messages ..which makes it very cool ..hope everyone wants it too
-
Emoji's in Room Names
It would be great to be able to "color" code the rooms with emoji's for an even nicer overview in the app homescreen. Currently some emoji's work fine (e.g. "✨ Bedroom"), while others result in an error (e.g. "🪴 Living Room"). The error after submitting a name with a "faulty" emoji:
-
Wireless Temperature Sensor child lock
When linking temperature sensor with tado TRV and child safety lock is enabled on TRV. You can still override and control the TRV by adjusting the temperature from the wireless sensor. Please add the option to enable child lock on the wireless temperature sensor or to the room.
-
TRVs recognising when a call for heat has failed
I got up to a cold house this morning. I looked in the app and all TRVs were “heating to 20°” however, despite it being 8.15am and my schedule being set to start heating at 6.45/7am all rooms were still only 16° or thereabouts. It turns out my combi boiler had dropped pressure resulting in the boiler being unable to fire…
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Homepage tile ideas (outside temp & wood burner temp)
Hi, just something that would be good to see would be ability to add a tile that displays outside home temp (via weather info source) and wood burner temp (of course would require additional hardware)
-
Two Factor Authentication on my account please
Hello, In a world where breaches are every day an account to mess with my home Definitely needs 2FA (2 factor authentication). Please make it a priority, it is kind of weird that way less important software companies introduced this a long time ago.
-
Set manual on off temperature
I would like to be able to set a manual on/off temp. For example the room will heat to 21 and turn off. It then won't call for heat until the room reaches 18 at which point it would bring the room back up to 21 before turning off.
-
Smart Schedules Profiles
As a user I want to be able to have multiple smart schedules that can be assigned to rooms without having to copy and paste. For example, I want a Smart Schedule for summer time and another one for winter time without having to tweak the temperatures or, for example, turn off a room, the office, while I am on vacation.
-
Control non smart TVR radiators independently
The system must have the capability to turn my heating system on but shut the smart TVR’s. That way I could heat my towel radiator without needing to heat another room unnecessarily. Surely the wireless receiver could call to heat whilst the smart TVR are closed thus heating all non smart TVR equipped rads.
-
Boiler modulation + zone valve control
I would like the option to use my extension kit to control the boiler via opentherm, but still have my wired thermostats click over when that sensor calls for demand so that I can use it for my zone valves. Really don’t understand why this isn’t an option, many home in the UK have zone valves meaning boiler modulation…
-
App home screen icons show % tvr open and issues low bat calibration or manual
Having the % open of the TVR on each room icon. If manual activated show hand Also any issue show on the app icon.
-
Energy IQ in tado web app
Hi, I'm a user of both the mobile and web apps. Would you consider adding the Energy IQ info in the web app as well? For this particular section, I always have to switch to the mobile app. This is the current dialog in the web app that appears when you click Energy IQ. The display space would also be more generous in the…
-
13 amp controller
Make the wireless thermostat capable of switching 13amps for heaters etc.
-
Lodgers tado app
I need my lodger to tell tado when he is away or at home But I feel for security he should not be able to adjust the control on the heating etc
-
More options to the Energy IQ
I have geothermal heating in my two-family house, which heats an underfloor water bearing heating system. To control it I have a bunch of actuators at two manifolds and thermostats in the rooms to control the heating. The app does not recognize my boiler, and thus I have chosen the closest one in the list I could find. I…
-
Prijsplafond in de app (grafiek)
Mijn suggestie om het prijsplafond in de grafieken te plotten. Op die manier is het verbruik tov het plafond nog inzichtelijker. Lijkt mij ideaal.
-
Programmation de la température souhaitée
Plutôt que de dire : Je souhaite régler la température à 20° à partir de 7h, je préférerais dire qu'à 7h30 il doit faire 20° dans la pièce. Tado détermine ensuite l'heure à laquelle il doit commencer à chauffer davantage. Ceci permet de ne pas trop changer sa programmation en fonction de la meteo
-
Aansturing CV-ketel in app
Ik heb mijn Tado bedrade thermostaat inmiddels enkele weken en ben erg tevreden. In de app mis ik echter nog een ‘statusmelding’ dat mijn CV-ketel wel/niet brandt. Op dit moment zie ik alleen de actuele temperatuur en een doeltemperatuur, op basis hiervan moet ik er maar van uitgaan dat de ketel daadwerkelijk wordt…
-
Range Limitation Publicity
This community shows that lots of people are having range problems in larger houses. But nowhere in the product information does it mention that all devices have to be within range of the Bridge and that thick walls will adversely affect the range. I have my Wi-Fi router at one end of the house and my boiler at the other…
-
Meerdere woningen onder eenzelfde account
ik vind Tado een zeer goede oplossing maar momenteel zie ik het als te onhandig om Tado te installeren en te beheren in meerdere woningen tegelijk om deze op afstand te kunnen volgen en instellen. hiervoor moet je immers werken met verschillende accounts op verschillende toestellen om alles praktisch direct open en bij de…
-
Set a delay in closing the smart valves after the "OFF" command to the boiler
When the boiler is sent to OFF, by the thermostat or by the intelligent valves, there is always a post-circulation time foreseen by the various manufacturers to allow the disposal of the residual heat. With Tado the thermostatic valves are closed immediately, generating overpressure in the circuit, and forcing you to leave…
-
History graph (also) in web app
I'd love to have the history graph of devices also in the web app. First of all because I have a larger screen and thereby better readability. Also I (ab)use the web app for another building, as multi-home support is not there.
-
Improved internet bridge / Better range.
I live in a property with 3 floors + a basement and my networking setup is on the top floor Attic and find devices in living room and basement disconnect from the tado bridge. I have Philips hue and everything works flawlessly throughout. The capabilities of the Tado Bridge needs to be improved for longer wireless range or…
-
Boiler external weather sensor + tado
It would be nice for tado to use the boiler external weather sensor if installed while running on opentherm/bus for more accurate heating. Why? Well, weather stations are not all over the place and not so accurate in some zones, so it would help people in remote locations.
-
Blocage de thermostat a distance
Bonjour, ce serait bien de développer un blocage d'un thermostat a distance et que lorsqu'on a des locations, comme ça on gère le chauffage et il n'y a pas d'abus avec des réglages de chauffage a + de 25 Degrés...
-
Heating Off minimum Temp
Hi. I notice if I set my Central Heating schedule to OFF in a time slot (IE: at night) the temperature drops dramatically and it goes very cold with no Antifrost protection. Yet. If I am AWAY from home and the heating goes OFF as I am not present I can set a Minimum temp to heat my home (while I not here as its in AWAY…
-
Hot Water temperature control
See this thread https://community.tado.com/en-gb/discussion/comment/54598#Comment_54598
-
Option to show demand temperature set in the schedule on the room temperature display
It would be helpful if there was an option to show the temperature demand from the schedule as a line on the room temperature display. I know that you can see it if you hold your finger on the temperature line of the graph, but it would be much easier to see how the room was performing if the temperature demand was shown…
-
Commande tadoo pour les poêles à pellets
je voulais juste savoir si vous pouviez mettre vos ingénieurs sur le coup et inventer un tadoo compatible poêle à pellets ça devient important pour nous personne ne commercialise ce système et pour ma part la marque Mcz ne souhaite pas faire évoluer ces anciens poêles en wifi. la télécommande est infrarouge elle prend la…