-
24 hour clock
The smart schedules are set using the. 24 hour clock. However, the next event for each room uses am/pm. I know I live in the UK with its outdated time but it would be useful for users to select a consistent 24 hour (or am/pm) format.
-
Smart Schedule overview for all thermostats
It would be great if you could see something like this in the Tado app… See attached example/picture….
-
Foutrapportage - Foutmeldingen van je ketel weergeven in de app (bv. te weinig druk)
Bij mijn huidige thermostaat van Remeha krijg ik foutmeldingen zoals bijvoorbeeld dat er te weinig druk is, of kan ik zien wanneer de brander actief is. Wanneer ik overschakel naar Tado zou ik geen enkele van dergelijke meldingen meer krijgen. Zie ook:…
-
Users of different categories
I would encourage Tado to introduce users with different categories i.e. one administrator, who makes all smart schedules and other settings, one user category, who can be assigned the role as adminstrator for one room, and one user category, who is read only, but counts in the geofencing. The reason for this is that i…
-
Average temperature of multiple thermostats in same room
In a large room with multiple radiators/thermostats, it would be good to have the option of using the average/weighted temperature instead of having to choose one device.
-
Gestion de plusieurs maison depuis le même compte
Bonjour, J'utilise le système Tado pour gérer 2 logements, et j'ai été surpris lors de la création de la 2ème installation de ne trouver aucune option pour ajouter cette dernière. Après quelques recherches j'ai trouvé d'autres utilisateurs confronté au même problème, et la seule solution semble être de créer un 2ème compte…
-
Hot water boost
Hi - just installed tado radiator thermostats and a hot water and thermostat- so now fully invested in the tado system. The only thing we are really obviously missing is a 30 min, 60 min , 90 min hot water boost which then switches back to programme afterwards. Would really love to see this otherwise likely will switch…
-
Colour code on air to air pump modes
The modes on the smart ac3, is colored blue for all modes except for heating, a small thing, but in fan mode it is confusing, as it is not cooling but just transfering air, make it light green so it is different from cold
-
Set max heating water temperature from the app.
This is essential for all hybrid heat pump installations.
-
Display battery status prominently on app
I have 1 tado thermostat in a property which is sometimes left empty, and I’m generally very pleased with it. However I recently received a message informing me that the batteries were running low. It would be an improvement to have the battery status prominently displayed on the app, rather than hidden in the menus, so…
-
chaudière en sécurité
bonjour. ma chaudière électrique ortli cer s'est mise en sécurité car il n'y avait plus assez de pression dans le circuit d'eau ( circuit avec radiateur). le thermostat v3+ ne m'a jamais prévenu que la chaudière ne chauffait plus ni même que la chaudière se trouvait en sécurité. Serait-il possible que l'appli ou le…
-
Be able to name devices rather than refer to them just by number
I would like to be able to name my Smart TRVs rather than them being numbers only. It would then be easier to know which one needs new batteries when the email comes through if there are more than 1 device in a room or area.
-
Add integration with the DCC database and other Smart Databases
I have the “Hugo” app what is fully aware of my energy usage that it collects from the DCC database. Being able to integrate this plus integrating tariffs such as Agile by octopus energy into the “smarts” of the product. As an example in the summer I would love it if left over power from my solar panels or cheap off peak…
-
Geen functie/symbool gebruik warm kraanwater op thermostaat
Volgens bijgaand artikel van support heeft de slimme thermostaat een symbool voor warm water productie. https://support.tado.com/nl/articles/3387237-wat-betekenen-de-symbolen-op-het-display-van-de-slimme-thermostaat-of-de-draadloze-temperatuursensor Op mijn (recent geplaatste) thermostaat krijg ik dit echter niet op mijn…
-
Humidity notification
Tado keeps also track of humidity percentage in the room, it would be useful to receive a notification when it reaches a certain percentage so that I can open the windows and clear some hair.
-
New development idea - define a maximum upper temperature
Hi, I like very much your products and have 2 of your thermostats installed in my house. But there is one functionality I really miss ..., hence this note. You probably already thought about it but just in case, here you go: within current context of very expensive energy you certainly have customers willing to LIMIT the…
-
Avoiding sticking pins in thermostatic radiator valves
The pins in TRVs often stick in the closed position if the valve is left closed too long - such as over summer. Pre-Tado, I used to open the valves fully for the summer so that the first action at the start of the heating season was to force the pin down rather than rely on the spring to open it up. This avoids the…
-
More than one tariff rate in energy IQ
Would it be so difficult to have more than one tariff rate? I have 2 tariff rates. One rate for the first 2kwh and another for the rest over 2kwh. So the costs costs shown in energy iq are not accurate at all.
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
toggle switch for schedules
hi there, my suggestion/idea is for a toggle switch for different schedules. my line of work demands that every other week i have a different schedule. one week I work in the morning, I start to work at 7AM, the next week I work afternoon, I start to work at 3PM. And then again in the morning... it would be great having a…
-
Worcester Bosch digital connection for 2000/4000/8000 series boilers
New wireless controller; https://uk.installers-shop.tado.com/products/wireless-smart-thermostat-starter-kit-v3-eu-version can you please add EBUS communication with the combi/system boilers to support modulation, since these are one of the most popular boilers available in the UK with modulation its stupid not to have the…
-
Group Rooms together
Hi, It would be beneficial to group rooms and schedules together. For instance if I want to boost the temp in certain rooms or update the schedule in certain rooms. I can hit the boost button or schedule them together
-
Boost heating until custom temperature is met
Hi, I would like to suggest a custom feature that. Currently when you boost heating it keeps going until the temp hits 25 or is turned off. I suggest you should be able to boost the temperature to a custom defined temp such as 21 or 22 degrees. Many thanks Neil
-
User configuration of "Early Start"
It would be good, if WE could set how long it takes for OUR ROOMS to heat by 1˚c (each room should have it own setting), then early start may actually be useful. Time to heat by 1˚c: 0hrs 30mins So if the room has a target temperature of 19˚c, and the current temperature is 16˚c, early start would kick in 1 hr 30 mins…
-
Restore single tap for manually override
Hi, In a recent app release (maybe 7.0.0) the ability to single tap to set a manual schedule was removed. Please bring it back! Before this was removed, it was possible to tap on the HW switch or room slider which would invoke a manual schedule that could then be edited and adjusted. Since the change, it's now necessary…
-
Mac M1 and the Tado App
Is it possible to allow the app to run on the M1 and M2 series Mac computers ? Not everyone in our home has a smartphone, so it would be nice they can use their laptop to control Tado. I asked this question a year ago but no one seems to care. It requires no extra programming, just a setting to make the app visible on the…
-
Boiler Switch On Activity
Having several rooms disconnected (independent) from the boiler it's not possible to know which room has activated the boiler and for how long. Just like the report for each room showing the heating statistics, it would be great to has the same for the boiler. It would show what time the boiler switched on and off, and…
-
Heat hot water on return home
Idea: I have my hot water set to heat 2x per day - 1 in morning and 1 in afternoon Sometimes I’m out in the afternoon when my water is scheduled to heat. An awesome feature would be, if I’m out when the schedule block occurs, and geo fencing means my water is turned off, when I return home again the water should be heated…
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
NEW DEVICE - Multiple Heating Zone Controller Extension Kit
Currently where you have a “System Boiler” that heats your hot water in a cylinder there is only one device available that can control your hot water separate to one heating zone. The extension kit. Larger homes are now being fitted with multiple heating zone control, particularly where you may have a split between…