-
2023/12 - Change App Schedule Colours to Match Tabs
The tab colours are great but the schedule summary bars are not. Can you change the schedule colours to match the tabs? Example: 18 degrees on a tab has a clear distinct colour but on the schedule bar it is a bland indistinct grey (3rd and 5th block on the right on the attached images).
-
Use sliders for Scheduling
It is not simple at all to edit a schedule. Please use a more intuitive way. With sliders or contextual menu etc..
-
Display temperature
Please enable permanent display of room temperature. Graag (mogelijkheid van) permanente weergave van de actuele kamertemperatuur
-
Simple fix for the smart TRVs
My smart radiator valves can’t heat a room without setting a large temperature offset due to the sensor being too close to the radiator. This feature doesn’t work very well because when the radiator turns off tado thinks my room temperature plummets, and then instantly turns the radiator back on. This seems to be a very…
-
Merged: how to add a second (and 3th) home with Tado to my app
This discussion has been merged.
-
Combining the best of Tado and Nest?
I realise the title of this post may sound odd or even controversial but here goes. My system is very conventional (read old fashioned) consisting of a 16 year old Viessman 100 WB1 boiler, gravity fed (tank in roof space) and I believe what is called a Y plan layout with separate two-way valves controlling the heating and…
-
Easy schedule or temperature change
Currently changing schedule is not that easy, we need to go through each device and each time block separately and then adjust it. Most of the time we want to change temperature level but each room might have different time schedule, then we always end up in changing one by one. This is really time consuming and tedious.…
-
Data & Analytics Room Selection
Would be nice to have a quick way of changing between rooms in the data and analysis section of the app. Currently need to go all the way back out and back into a different room. A drop down menu to change room would be nice
-
Export schedules and name devices
Hey, a couple of things I thought would be worth sharing that could improve the app/experience. 1) the ability to nickname devices within a room. I get the xxx needs new batteries email but don't know which radiator in the room. If I could nickname them I'd know which needs replacing easily rather than needing to check. 2)…
-
More compatible heat pumps
At…
-
Increase Zone Controller Max Rooms
I ran into the limit of 10 rooms on one Zone Controller and I need it set to 12 rooms. I am sure this has also affected other Tado users retrofitting a complete house.
-
Reset of meter counter
Hi, I have recently got replacement of meter device from gas company, and it has counter "reset" to some value that is smaller than last value I have entered in application. Current support recommendation is to delete all past records, and to start over from time when this meter was installed - with loosing all history…
-
Show current temperature on TRVs
Would it be possible to have an option to show the current temperature on the TRV? I have the child lock enabled on all my thermostats and when you spin the wheel it flashes the programmed temperature. It would be nice if there was a way to nudge the dial and display the current temperature without having to open the app…
-
Radiator Fans
Hi Could you look at the possibility of add on-product such as a radiator fan kit... fans that clip under the radiator, controlled by the Tado valve, so when valve turns on, the fans help circulate the air around the radiator?... this would make a great add-on to Tado and help make it stand out from the other smart valve…
-
May I kindly request you to stop using odd numbers on the Y axis of your graph?
I can’t believe you still ignore so many of your clients asking for an update on this feature since 2019. It’s quite easy to address the issue by either stop using odd values on the Y axis for temperature and humidity or, allow the user to manually adapt it with his own preferences. Sorry but having horizontal graduation…
-
Turn on radiator valve for maintenance
Not sure if this is already implemented but I couldn't find it. It would be nice if we can open the radiator valves for maintenance even if the temperature is way above 25º. I needed to manually open all the radiator valves for maintenance.
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Switched Fused spur / smart plug controller
Hi, I really like Tado and we have smart thermostats on all our radiators. However, we also like our electric fire on in the living room from time to time. It would be nice if there was a switched fused spur or smart plug option so we could control all our heating devices through Tado. We could control the fire through a…
-
Link with energy provider
I love that you can put your meter readings in to the app and see your savings but I will often forget put the readings in. The new reminder feature is good but would be amazing if I could link my tado with my energy provider so that it auto updates.
-
Fix the geofencing functions that I pay for
I paid Tado so that my heating would use geofencing, well it does not. When contacted Tado say there is an issue but have not provided a resolution. First it was my partners phone that would not be picked up, so we changed the phone as there was another app with another issue. Her phone now works, but I don't see why her…
-
Widget
Hallo het zou fijn zijn als de Tado applicatie ook een Widget kan oproepen op het beginscherm, misschien leuk voor de volgende upgrade !! Succes Met vriendelijke groet Stephan J Vestallen
-
Ebus Max Flow Temperature setting (like the one just released for Opentherm).
Would it be possible to do the same for Ebus controlled boilers via the wired Tado, +- settings? My Vaillant can ramp up to 80C if it wants even if I set the max temp lower on the boiler. The ebus will ignore these settings and do what it feels is best. I might only want it to go to 66 or 70C max for example. It's just…
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler
-
Responsive User Interface
The User Interface should be responsive to ensure it renders correctly on all screen sizes maximising the resolution to ensure the best possible usability. When programming complex schedules it's much easier to use the web interface on a PC or Mac where you should have the benefit of a large screen showing the full smart…
-
When heating a room, open valve in steps
When Tado heats up a room for example from 18c to 20c, it´s all or nothing. Because the valve is open all the way, it make a hissing noise. What if it opens in steps? That would minimize the noise coming through the valve. It´s not tado that is is causing the noise, but the valve being open full to reach the Temputure all…
-
Electric Radiator Element
There are Wifi controlled elements for electric radiators on the market so assume this is not an impossible request. However, it would be great for Tado to offer this option to link in with the main app (like the AC controls) which can offer heating to areas of a property where no wet heating system is installed. it would…
-
Labels for devices
I have a single room (the kitchen) that has multiple radiators in it. I have smart switches on all of them. It would be useful to label the switches, ie “Radiator By the Window”. That way when the battery is low it is easier to know which one it is.
-
Multi-room presets
I would love a feature in the app where various whole-house presets could be customised and then initiated at the touch of a button, creating different heating profiles for each room. For example, I would create a "Work from home" button that would turn up the heat in my home office to 20, and turn down the other rooms to…
-
Thermostat should measure humidity in a way that is not useless
Hi, I’ve been using my smart thermostat for a while on firmware 90.1. I have it integrated with HomeKit and as it turns out, using HomeKit (an advertised feature) completely breaks the humidity sensor (also an advertised feature). The humidity sensor is completely out of touch and only reports values every 5% change. This…
-
A configuration option to delay geofencing (returning home)
I propose a configuration option to delay heating (when automatic geofencing is used) when returning home. This could be useful for single person households where primary mode of transportation is cycling. Rationale: Most of the time I travel by bike. When I return home, heating is not necessary for about 30 - 60 minutes,…