-
Heating Activity Filter
Please add the ability to filter the Heating Activity list so that I can see only the rooms that have a zone controller assigned. The heating activity list shows some rooms calling for heat when other areas are warm enough. It'd be good to be able to switch.
-
Hybrid Heat Pump support [Atlantic Aurea 5 R32]
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermostat. If plugwise can control the hybrid system, it should be trivial for tado to do the same thing. I would like to remove…
-
Honour Schedule While Offline
My Tado keeps disconnecting from the internet (the only device on my network with this problem). This means the schedule to power heat for 0630-0700 doesn't come on, meaning no hot water for a shower! 🥶 Could the schedule be pushed locally onto devices which are connected to power, but disconnected from internet?
-
Adding the "Disease" scheme
I am asking for the option of setting one "button" of the sickness scheme, when the heating of rooms that are switched off according to the plan needs to be urgently addressed, because normally during the day there is no need for heating in these rooms. But in the case of Home office, illness, etc., the heating scheme in…
-
Range Extender
We live in a 4 stories house with a lot of concrete. The Bridge is only able to reach 3 stories, on the 4 floor does the signal often go away and the device is offline.
-
Exterior weather monitor
I would like to have my own external weather monitor that could feed directly into tado to give a more accurate picture. Along with more interesting stats - probably.
-
2 Bridges
Can you have 2 bridges. I will have 2 zones can each one connect to its own bridge. I have a big house and connection is unreliable with one bridge. Thanks John
-
Select and copy serial number to clipboard
When contacting technical support they request the serial number of the device. You have to manually type it in when you should be able to long press and copy to clipboard
-
EnergyIQ bad UI design for viewing history
Hi, Thanks for the latest EnergyIQ update: >> Energy IQ has been updated, and now you can view your historical heating consumption all the way back to when you first installed tado°. To check your consumption from a previous period, open the Energy IQ skill and select the desired month from the dropdown menu at the top of…
-
Fuel bill entry
A lot of people who live in rural areas may not have piped gas to their home. Those of us who are either on LPG or Oil get irregular deliveries of fuel. It would be great to be able to simplify the energy bill entry as it could be anything from three to five months between deliveries rather than monthly, quarterly or bi…
-
[released in beta] Yearly Energy Data
Energy IQ is a good start and enables the user to see costs of current months heating cost compared to last months. Can you add a feature that allows user to look at last years complete monthly data and compare it with current year to date. Users can then see if changes to their system have made a difference to running…
-
Quick offset for summer & winter
Like most my thermostat is downstairs near my boiler, I often need to change my +/- offsets as my upstairs bedrooms are warmer in the spring / summer and cooler in the autumn/ winter, would be nice for an auto correction around those times of year for this.
-
Zones or Seasons
We have all our thermostats set to 21 and so when it gets warmer they obviously switch off. But for rooms like the bathroom which don’t need to be warmer than 21 it’s good to still have in to help dry towels etc. so it might be good to have a seasonal setting which just boosts regularly the system automatically at a…
-
Low battery heating demand should show on Care and Protect
When the low battery condition is triggered, the "care and protect" function says that the heating is not on, but it clearly is. The care and protect function should show, preferably, a message saying "heating demand due to freeze protection for room/valve change battery", or even just "heating 100% room".
-
Low Battery Heating Command should take outside temperature into consideration
In a low battery condition, the smart radiator valve seems to command heating, presumably to avoid potential freezing when unattended, however, this is unnecessary when outside temperatures are high (like today!) - the defect/feature request is to disable this behaviour when the outside temperature is above e.g. 5C I kind…
-
Stats in the web browser + Fix weather on off toggle button
Hi, Can we have the stats available via the web interface? Also on the stats in the Android App the Outside Weather toggle button is the wrong way round to the Heating on and Humidity button, if you toggle them on whey go grey yet grey on the weather button turns the weather off.
-
max temp
I have people living at my house and they ALWAYS put the temp on max - please add feature to set max possible temp to fx. 22 degrees or so...
-
Wi-Fi Concern
Hello, If the wi-fi goes down in the property, does that mean you are not able to turn on the central heating in the property? If this is the case, I think this needs discussing by your community members, and needs this feature adding to your system. We have friends in rural areas where the wi-fi can be very intermittent,…
-
Tado 3-Way Controller
It would be great for Tado to develop a replacement to a 3 way controller. I have 2 heating zones and a DHW. Tado wired thermostats and radiator valves control the heating zones, but the 3 way controller has to be set so the heating is 'Always On' for Tado to control them. The water is still programmed by the 3-way…
-
Create limits for heating
To create a limit for the heating for when someone is staying over
-
Heat pump simulation mode
With ASHPs being pushed so aggressively in the U.K. and with Tado users likely being on the forefront of heating efficiency, it seems to me that a ‘simulation’ mode would be helpful. The idea would be that tado (when linked to digital connections) would cap the max water temp at 55 deg and ideally target lower temps. It…
-
zones
hi guys any chance of a feature that allows you to block rooms together. i.e. upstairs/downstairs/bedrooms. you could simply call them zones. if you can and the boost into this aswell so hitting "boost upstairs" would heat everything in your "upstairs" zone. tell me what you think, thanks
-
Essential Tado App Improvements
Hi everyone, I have been asked by Tado to post my request that the IQ energy facility within our Tado Apps be updated to include our electricity readings. This because... wait for it, you're not going to believe this... So us Tado Customers can vote on whether this should be included within the App. I can almost hear the…
-
Radiator thermostat colours.
Does any one agree with me that it would be really useful if there was a range of colours for the radiator thermostats? They could be available to match the many colours of radiators that are available. My new radiators are anthracite and the white Tado thermostats seem a little out of place.
-
Boiler service anniversary date
I've just installed Tado and I'm quite impressed. A concept/product which lives up to the hype. I was though surprised that in the care and protect section though there doesn't seem to be any option to add a boiler history, eg install date and then service anniversary. An oversight when there is an option to book a…
-
Named schedules for different situations
I have a 4 bedroom house in which I live with my wife, however, we often have visitors. We only need certain rooms heated for our own use but we have a childrens bedroom which we want heated to a specific schedule when our grand children stay over. We also have a bedroom and bathroom which we only want to heat when we have…
-
Add new colour to the Temperature graph for "Early Start"
As title say's I think it would be nice to add a different colour to the graph that depicts when "Early Start" was invoked. to this graph
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
SET to a VALUE (MIN or MAX)
Hi, One important feature is missing on the app. All the settings are related to the temperature measured by device. There is no selection for "FULL OPEN" or "FULL CLOSE" what sometimes we need to. I have Vaillant Boiler with Vaillant eRelax Room Termostat. While i'm using it together with tado on my all radiators, there…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.