-
Named schedules for different situations
I have a 4 bedroom house in which I live with my wife, however, we often have visitors. We only need certain rooms heated for our own use but we have a childrens bedroom which we want heated to a specific schedule when our grand children stay over. We also have a bedroom and bathroom which we only want to heat when we have…
-
Add new colour to the Temperature graph for "Early Start"
As title say's I think it would be nice to add a different colour to the graph that depicts when "Early Start" was invoked. to this graph
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
SET to a VALUE (MIN or MAX)
Hi, One important feature is missing on the app. All the settings are related to the temperature measured by device. There is no selection for "FULL OPEN" or "FULL CLOSE" what sometimes we need to. I have Vaillant Boiler with Vaillant eRelax Room Termostat. While i'm using it together with tado on my all radiators, there…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.
-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Away mode schedules for hot water
Away mode for hot water is simply on or off. Is it possible to have on or off or a schedule? As is case with heating, when I go away in winter months, I would want some heat in the water system as well as within the home to ensure against freezing pipes and condensation build up in rooms and mould.
-
Can we get smaller buttons?
I don't see the point in having to scroll down to see all the rooms, and then all the environmental buttons. It would be great if there could be an option to resize the buttons (e.g. specify how many in each column). Likewise, the quick buttons at the top require horizontal scrolling when again they would be in columns.
-
Tado...low heat,pump running for hours.
Hello! I have disconnected my tado V3+ cause to be honest i did not liked the way it worked,and to be more clear and on the matter of facts,i can tell you that after the instalation( bridge+ thermostat+ wireless receiver) and let the Tado to do his work i have discovered it is very annoying and frustrating to see the Tado…
-
Temperature presets
When adjusting the temperature for a specific block i do need to edit all time/day blocks individual, which is cumbersome. An enhancement could be the ability to have a couple of preset temperatures which can be assigned to the time block. Like "high temp." "low temp." "night temp." And when i then change the preset all…
-
App suggestion front page dashboard heating room
Can you show in the overview of the room with the small heating icon,which room is requesting heating? Right now I have to open each of them individually to see which one is triggering my kettle to run. Would be easier to see this in front screen
-
Humidity warning
Hello, I like Tado very much, but I have a new request. The new feature of the air humitity in the rooms is really nice. But what would be very nice is that we get a warning if the humidity in a certain room is too high and if we have to open the window. That would be great! Thanks in advance! Greets from Belgium, Manu
-
2 of 3 verschillende Slimme schema's
Is het een idee om meerdere slimme schema's te kunnen maken. Welke je kan selecteren. Bijvoorbeeld: Slim schema 1: Normale week Slim schema 2: Thuis werken Slim schema 3: Vakantie (dus later uit en in bed dan normaal)
-
Open Windows sensors
The open window detection feature doesn't work well for me. Are there any plans to add sensors to your system? Thank you.
-
Full Air-conditioning Control
I have a house in France that I rent out with 5 air Mitsubishi Conditioning units. These units are inverter units so can perform the following tasks: cool,heat,dehumidify, fan, the IR controllers interface looks to of been created by the same guy that invented scientific calculators. Great if you know what you are doing…
-
Priority order that rooms heat up in
I think it would be a good idea to be able to set a priority of what order the rooms in my house heat up in as this would help when heading home as I would like lounge etc heated up to temp first but not so fussed about bedrooms and bathrooms. This would help to save money as heating system could come on later
-
Apple Watch native app
With useful canned responses/quick links eg message “you seem to have left home.. [switch to Away] [dismiss] Single click. Very cool Or at a glance small tiles showing which rooms currently being heated
-
Wasting battery power
Why do the valves work totally independently of the main start and stop process? What I mean is, why when the pump is about to stop do the valves close? They then may need to reopen again when the pump starts. If the valve was left open it would be ready when the pump restarts. If that valve doesn't need to be open it can…
-
Extensie voor internet bridge
Gelieve een “access point” / “repeater” functie te bouwen van jullie bestaande internet bridge. Mijn woning heeft 2 volwaardige verdiepingen en het bereik van de huidige internet bridge is niet voldoende. Een bijkomende bridge (per verdieping) lijkt mij geen onmogelijke opdracht. Jullie hebben reeds de hardware. Zet daar…
-
Current Temperature Font
Hi, So even though my eye sight isn’t what it used to be, the font size for current temperature is tiny, it really does need to be made bigger and should be a pretty straightforward UI fix.
-
App Tile Swipe functionality
I would like to suggest adding tile swipe functionality. This would be to enable a swipe to the next device/thermostat after selection from the main dashboard. The app currently requires you to exit and select to enter the settings for another device. Retaining current functionality whilst adding the swipe to the next…
-
Not a new idea. Just common sense
I join the clamour for the bridges to act as repeaters. I have a large 18th century house with a barn wing and two heating circuits from one, large boiler. It took me ages to get tech support to explain how to control which room linked to which heating circuit, but I did have to buy to starter packs - so I have two bridges…
-
Limit the amount of heat a room can request (three flames)
It would be awesome if we could limit the amount of heat a room can request. This could be based upon the three heating indicators already shown in the app. This way we could limit a room with in floor heating to only request low heated water since it does not make sense to run the system at 70 degrees because the intake…
-
Home page indication for rooms on altered schedule
I am new to this, and messing with the schedules to set it up comfortably. I've noticed when I make a manual change to a room schedule, and then return to the homepage, the room icons show the set temps, but the button at the top right says Resume Schedule All Rooms. What you can't tell is which room(s) are set outside the…
-
Show current humidity in the main app screen
It would save a lot of clicks if we could see the current humidity in the main screen, close to the current room temperature. There is a lot of free space for this in each room square.
-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Activity logs
Hi, Right now it's very difficult to know if Geofencing is working or not. It would be useful to have a log that remembers a few events like: switched to away mode, switched to home mode, temperature lowered in room x, etc. This way we would know if Geofencing works correctly... My app closes all the time and since there…
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
Advance Programme Setting
Hi I have my heating system set up to come on at a specific time. Sometimes I get home early and want to turn the schedule on rather than wait for the schedule to kick in. At present if you boost the system ALL the radiators come on. Turning them on individually is a pain I have contacted Tado and there is no way around…