-
Change your business model. Build your userbase and products
Tado, I like your products but it's clear from the forums that development is slow and users get frustrated with a lack of progress on features that should be there I feel that your business model of selling hardware to users is partly to blame here as once you've sold the kit, you have no income stream to fund new…
-
Always on display for wireless smart thermostat
Please enable the feature to allow always on display of room temperature?
-
show humidity on room tile
Why do I have to go into a room to see the humidity? There’s enough space on each room tile to add the humidity figure.
-
Start
Waarom laten jullie niet meteen op het homescherm de ingestelde en huidige temperatuur zien. Nu moet je telkens per ruimte bekijken
-
Adding the "Disease" scheme
I am asking for the option of setting one "button" of the sickness scheme, when the heating of rooms that are switched off according to the plan needs to be urgently addressed, because normally during the day there is no need for heating in these rooms. But in the case of Home office, illness, etc., the heating scheme in…
-
Central heating output temperature setting, manual pump activation and some other items.
Hi all and Tado, With winter coming up and having used tado for quite some time already we can say we're satisfied with how it works. But there could be a few "upgrades" in the app and possibilities. first of it would seem a good idea to be able to set the central heating output water temperature as well, same as how you…
-
Message if thermostat goes offline
It would be very helpful if, just as you do now when a device battery goes low, you were to send out a text message when a device goes offline.
-
Internet bridge extender
I need an Internet bridge signal extender for a total coverage of the house.
-
Smart AC Control V3+ doesn't support ECO mode for Mitsubishi airco's
I am the proud owner of a Mitsubishi airco and a the proud owner of Smart AC Control V3+. I would like to move to using the Tado Application only, but unfortunately it doesn't have the ECO option which the normal Mitsubishi remote control has. Could this please be added in future releases? Thanks, Gerard.
-
Heating Activity Filter
Please add the ability to filter the Heating Activity list so that I can see only the rooms that have a zone controller assigned. The heating activity list shows some rooms calling for heat when other areas are warm enough. It'd be good to be able to switch.
-
Aggiornare APP
sarebbe ora di aggiornare l’app e rendere possibile avere più HOME Utilizzare 2 telefoni o dover uscire dall’app è oltremodo ridicolo e non all’altezza dei vostri ottimi prodotti, nonché una funzione ormai disponibile praticamente in ogni app di allarme e controllo remoto. Credo sia doveroso per il vostro reparto tecnico…
-
More Settings options for AC
Current AC v3 owner... satisfied with the overall experience. As others have said, display could be showing lots more. Controls could be a little easier/more intuitive and Humidity could be visible to the Home app as a tile. Ideally, the device could be receiving the "dumb" remote signals to update its status as well. But…
-
Vaillant VR66 compatibility
Tado was compatible with the discontinued VR65. It would be very helpful if you could make it work with the current VR66 model.
-
Smart AC Thermostat Battery Pack & Homekit Upgrade
Hello folks! I'm a tado enthusiast and I built quite an ecosystem at home: always felt that tado products have an extra kick both in design and experience customization which made me choose them above the competitors. I was a bit turned off by the Smart AC Thermostat USB cable hanging along the wall and plugged in the…
-
Honour Schedule While Offline
My Tado keeps disconnecting from the internet (the only device on my network with this problem). This means the schedule to power heat for 0630-0700 doesn't come on, meaning no hot water for a shower! 🥶 Could the schedule be pushed locally onto devices which are connected to power, but disconnected from internet?
-
Hybrid Heat Pump support [Atlantic Aurea 5 R32]
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermostat. If plugwise can control the hybrid system, it should be trivial for tado to do the same thing. I would like to remove…
-
Maximum Temperature Limit
Hi there, with the increasing cost of fuel , I was thinking that a maximum temperature limit may be of some use that could be set by the account holder in order to prevent "temperature tampering" by anyone not authorised. This could possibly be built into the app, and hopefully could save money. Any thoughts !
-
Outdoor sensor
outdoor sensor to track the outside temperature/humidity to help improve the weather adaptation
-
Window opening time
I am asking for the possibility of extending the time of the open window, at least for 3 hours. This longer time is necessary, for example, in a family house, where the humidity in the bathroom needs to be ventilated through the window.
-
add a choice between 0,1 OR 0,5 degreechange in the app
I disagree with only 0,5 change. I bought a Tado for its flexibility with 0,1 degree changing. Now it is 0,5. Why nog helping both with a choicepossibility in the app: 0,1 OR 0,5.
-
Ability to add notes to statistics graphs
Just had a thought regarding the temperature graphs. It would be nice to be able to add notes to it, to better understand how our actions impact the temperature in the house, and/or heating use. This could be things like manually adding when windows were opened (if not detected automatically), or when hot appliances were…
-
Temperature limit on thermostats
Hallo, Is it possible to make the maximum temperature of Tado thermostats (currently 25 ºC/77 ºF) adjustable? Of course my question is related to the climate crisis and the current energy crisis in Europe. Some people do not save energy and their energy use has become extremely expensive. I'm looking for ways to limit…
-
Lock Set temperature limit peer room
Lock Limit of set temperature - bearing in mind global warming, as well as useful functions: the application lacks setting the maximum temperature in a given room, it is about manually setting to Smart thermostat and Smart radiator to, for example. The maximum possibility of setting the temperature was in the application…
-
Range Extender
We live in a 4 stories house with a lot of concrete. The Bridge is only able to reach 3 stories, on the 4 floor does the signal often go away and the device is offline.
-
eliminazione modalità operativa su Termostato
Salve volevo farvi ragionare sulla scelta di eliminare la possibilità di impostare la modalità operativa su Termostato con il controllo clima In pratica adesso questa funzione non è più utilizzata perchè ritenuta obsoleta. Sono in disaccordo. Attualmente con l'ultimo aggiornamento avete impostato che il controllo clima da…
-
Exterior weather monitor
I would like to have my own external weather monitor that could feed directly into tado to give a more accurate picture. Along with more interesting stats - probably.
-
App emergency push notification when bridge connection goes down
When Tado bridge loses connection with the cloud, and thus the mobile app please can the app push a notification to alert the phone user that something has gone bad with the Tado install so that we can fix it ASAP. Examples being no hot water or heating stuck in ON mode if the disconnection has happened whilst asleep.…
-
App feature: faster on/off using the main screen tile
I've been doing a lot of manual adjusting of my ACs the last couple of days to figure out what is a nice temperature and what isn't. And so I hit upon an idea which could improve the app: In the app we have tiles for each room. It would be a nice feature if by performing a hold-button action (for say 3 seconds) on the tile…
-
Official plugin for Elgato Stream Deck
Please create an official plugin for the Elgato Stream Deck. This would allow us to control our thermostat directly from the Stream Deck. There are unofficial plugins out there but they ask for direct entry of our tado username and password and this is a security risk. An official trusted plugin would be great. Thanks
-
Display Control for thermostat
It’s “Nice” having a white square that does nothing until you press the button, but surely having the ability to control the interface so that it could be configured to be “always On” (battery drain warning) or to display the current temperature / air quality for “X” seconds every “Y” minutes would be great