-
Mobile app should be near real time up to date
The mobile app lags significantly behind the thermostats and relevant heating systems. This makes it very confusing when the boiler is calling for heat, but the Tado app shows that nothing is heating. I've also had it, whereby the thermostats are saying 25 degrees yet the app is showing that no heat is being requested.
-
Add max. valve opening on thermostats!!
It is crazy how my thermostats are often overheating causing a loss since the exiting water in my radiator is boiling hot. This is CRAZY EXPENSIVE - but app still calculates this as savings which is simply wrong. Add the functionality to limit water flow e.g 25-100%! Add the functionality to set max time on the max water…
-
Geo/account koppelen
Om bijvoorbeeld 1 kamer aan 1 persoon te koppelen zodat als deze persoon de woning verlaat de verwarming reageert op de geo. Dan zou je het account van deze persoon/ telefoon aan een radiatorknop/pen moet kunnen toewijzen. Nu reageren allen knoppen op de geo van iedereen. Je kan alleen knoppen uitsluiten van geo. Toewijzen…
-
Area expansion for Tado acount; 2nd internet bridge for better coverage in larger housing
The Tado system can currently work with 1 internet bridge to communicate between the devices. In a situation of a larger space of multiple 3+ floors 1 internet bridge is no sufficient to communicate with all devices. In my case I have a house with 4 floors and 3 thermostats on one floor are not in range (als not after…
-
Lock openings
Hi! My termostat in my bathroom are connected at the bottom to my towel rack and the thermostat are very close too the heat pipe, so the thermostat belive it is warmer in the bathroom compare to actally temperature. So I wanted that to be possible to lock the openings on the thermostat without to check the temperature in…
-
Merged: Heating profiles
This discussion has been merged.
-
standard temperature: lower
The standard temperature of TADO is 21 degree C.. If that is true, isn't it a better idea to lower this standard temperature on behalf of the climatecrisis and, recently, saving costs? For example lower it to 19 or even lower temperature. If someone wants to heat more, be free with TADO to do that.
-
Need for multiple profiles
Dear Team, I have installed 12 Tados so far in my house and more are to come. I like the idea, although it is not a new one. However, yours seems to work 👌 Having said this, I am missing one huge functionality: as an example: if you have your kids over every other week, I would need to every week redo the schedules so as…
-
switching point in schedule should overwrite manual input
i have a tado at home and in the office. main problem i have with it that people set the temps manually. so it is set to hot and heats all the time. tado does not have setting to say. overwrite manual input at next switchi g point (eg at night same day) so it keeps heating at full steam. it should go back to schedule at…
-
Ac and valve in same room
Can you please make it possible for ac and boiler to be in the same room and see what would be thr best energy usr to heat if for one room mostly would be beter for the ac part to take ocer the heating
-
Directly select room on the Graph page, without navigating away
Please could a drop down to select each room be included on the graph screen in the App? This would allow quicker comparison of how different rooms have behaved, without having to navigate away to a different room and then selecting the charts again and again. I find the graphs of each room very useful, but find it…
-
Backup settings
Problem - other members of family mess up carefully programmed heating schedule. Solution - access rights of other users limited or way to restore backup settings to revert to original schedule.
-
Individual Smart Thermostat Rad Control
I know there is a button to turn off all thermostats but it would be useful to have the facility to turn off individual stats say when someone not going to be there during the scheduled times set for that room
-
Hot water stats
Any chance to have stats for the hot water? At the moment it is impossible to see how long the hot water has been on for a day/week/month/etc I can see when the boiler has been on but just for heating.
-
Better Boost
Please look into allowing the user to control the temperature of the "boost" facility. 25°C is way too high
-
AM/PM & 24h time format
Please make 24h time format available, either based on system (phone) settings or by choice in the application. AM/PM doesn't stick in my head.
-
Integrate Enerqy IQ with smart meters
This interface is technically possible - as an example the free Loop app already connects to smart meter data and manages it well..... https://loop.homes/
-
Energy IQ with Prepayment Meter
Add the ability to use Energy IQ tracking with a prepayment meter. It can be used currently but I have to manually calculate units used since the first reading. Keeping track separatly of how many unit have been added to the meter. It should have the ability to add how much is left on the meter by day and also to keep…
-
Relay and Opentherm together
The Tado extension kit can control the boiler through a relay (simple on-off switch) or through the Opentherm bus. The bus allows for better temperature stability and higher efficiency as it tells the boiler to turn the heating up or down as necessary. If a heating system contains other elements, like a shut-off valve or…
-
Report all disconnections/failures clearly in the app
Some device disconnections/failures will immediately show in the app via a change in the icon for the relevant room and changes to the reporting in the climate chart. However other devices are for some reason set up to fail quietly. For example an extension kit controlling the boiler can disconnect and the user will not…
-
Way to manually signalize open windows
Hi, I've noticed, that sometimes the App does not catch the fact that the windows are opened. I'm not surprise, because during relatively mild spring or autumn days the temperature outside may not differ that much from the inside, and as result the change in temperature may not be that dramatic for algorithm to pick it up.…
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Active/Passive mode for TRV's
Whilst running the TRV's last year I noticed a couple of issues. 1 - As each TRV called for heat at slightly different time, the boiler was constantly having to bring water up to temp to heat an individual room 2 - To try and avoid this I was having to set heating much lower in parts of the house increasing the risk of…
-
Geolocation for individuals in household
Hello, I would like to have the possibility to switch off the airconditioning when one individual in the household is away (in their room). This while other systems stay on. I now can only set 'away' for the whole family.
-
Beta channel
I did sign up to the beta version of the App, and it would be great to be able to: See the a brief list of changes (new features / fixed bugs), so one could look closer and test it Get a button directly in the app, that would allow to provide a feedback in a form of a bug/ticket with few clicks directly from the app Unless…
-
Missing data in web-app
Hi Tado´s I really miss the fact that in your browser app there is access to the same data about operations as in your Google app. When it is found on the mobile, it means that the information has been collected about how the individual thermostats operate, heat, humidity, etc. But in your web app, keg can only see a very…
-
Go back to %%%%%
I have two wireless thermostat sensor And before I could see The percentage of use of each one Now it's got updated with a graphic That doesn't specify each one consumption If it keeps like that I won't renew the annual subscription Before if I spent €100 i could divide the expenses for each sensor now I can't Or can I ?
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
What do you think of this ? Improvements for Time slider for changed schedule
The time slider (see screenshot) is difficult to operate, the the scale is too small. The time changes are therefore not precise. A few ideas (see screenshot edited) Make the slider as big as the temperature slider (vertical) Display the future end time immediately, not when letting go of the slider (eg. +2h 30 min)…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.