-
Add Humididty to Climatecomfort screen
Could you add humidity next to C° on the screen ? See screen capture Thx
-
Energy IQ - dual rate
I just want to suggest that in your energy IQ feature that you allow the user to enter two rates (a day rate and a night rate) if they are on an economy 7 energy deal. otherwise, this feature is useless to me. Also, most people in the UK have a standing rate too.
-
Radiator thermostat colours.
Does any one agree with me that it would be really useful if there was a range of colours for the radiator thermostats? They could be available to match the many colours of radiators that are available. My new radiators are anthracite and the white Tado thermostats seem a little out of place.
-
"Advance Heating" Feature
This is a standard feature in most heating systems - some form of control to advance the heating to its next programmed state. Scenario - it's 22:00 and I want to go to bed early and turn the heating off. The heating is programmed to be on until 23:00. Of course if I TURN OFF all rooms that works, but the problem here is…
-
FEEDBACK
I love my TADO product but whilst I appreciate you think you’re moving into the future by only allowing online chat to consumers but for me it’s very limiting/time consuming and in my humble opinion would not make me buy your product.
-
Early Start Phone App UI changes.
I was asked by Tado˚ to start this discussion, so here goes. In the Web App when the room is calling for heat due to "Early Start" it is shown in the UI like this. But, this does not show in the Phone App, so you think the room is calling for heat for no reason and can be confusing...
-
Turn off whole system for specific timed limit
Hi all, my suggestion is to be given to option to turn off the whole system for a time limit as you can with each individual thermostat. My family’s schedule isn’t the same day to day or week to week and changing the current schedules on a daily basis is time consuming. However when that last person leaves we do know when…
-
Multiple bridges per house/apartment
We live in a large house with thick concrete walls. It is difficult to cover the whole house with one bridge respectively to reach all Tado products with one central bridge. I have two bridges at home, but I can only register one in the app. It would be very helpful if I could register two (or more) bridges. This way I can…
-
Wireless receiver status in app
Can we show wireless Status in the tado app?
-
Add installer menu on the app
I was not home today and someone from customer support did rebooted my system from R01 relay on/off to digital opentherm D01 and as a consequence i can see the temp inside my house is dropping (-3°C outside) ,heat request at max.{{{ waves but cause of the rebooted system the signal will not go to the boiler to fire cause…
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
Linked Hot water / Heating
I have a boiler with a hot water tank. I have both the Tado thermostat and hot water extension unit. It would be handy to have a setting to have the hot water sort of 'boost' when the heating was engaged... If the boiler is on and working then there is no reason why the hot water couldn't also be working.
-
Add a lock mechanism to Smart Radiator Thermostat
Currently anyone can easily unmount Tado Smart Radiator Thermostats, accidentally or on purpose. This can damage the device. Users other than the owner/maintenance team should not be able to unmount the Smart Radiator Thermostat. Please add a lock mechanism to prevent easily unmounting the radiator thermostat.
-
Do not count independent trv opening in heating time
I was away most of the day and one of my indépendant trv was open but the boiler was off (because away, as expected) The problem is that open time is counted in the heating activity, thus making these statistics totally irrelevant. Is it possible to only count the boiler heating time?
-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Reducing the duration of heating scheduled time slots
Hello given the current energy crisis, I wanted to find out if you would consider changing the standard heating schedule time slots from a minimum of 15 minutes down to 10 minutes. It does not make sense that I am able to boast my heating for 5 minute intervals but the smallest interval I can set my heating schedule to is…
-
Away mode schedules for hot water
Away mode for hot water is simply on or off. Is it possible to have on or off or a schedule? As is case with heating, when I go away in winter months, I would want some heat in the water system as well as within the home to ensure against freezing pipes and condensation build up in rooms and mould.
-
Tado will be better this way!
A. Keep it as it is. B. Give us local control if internet down( with some limitation on the app,course!). C. Make it more reliable and trustworthy (point B included). D. Better inside coverage of the bridge and strenght signal on the app for all zones covered. Maibe our votes will be read and seen by the Tado customer…
-
Confirm boiler shutdown before closing last rad valve
Hi, If the Tado app made sure it turned the boiler off before it closed the last radiator valve then this would allow the whole heating system to have tado valves on each radiator. In our house we have a nursery radiator which comes on regularly through the day and night. Because some radiators don't have thermostats…
-
Water damage / Fire detection
Not directly related to heating management, but will be a great asset: using the sensors available (temperature/humidy) to notify user of probable inprogress water damage (very high humidty) or fire (very high temperature). Would I had received such a notification, this would have greatly reduced the extend of damage that…
-
Return to previous state at end of Manual Control session
If a Manual session is set and everything was set to off previously then at the end of the Manual session then it should all switch back to being off rather than switching to Smart Schedule. This currently seems like a major oversight and is misleading to users as it does not do as people would expect it to work. If the…
-
Boiler problem detection
My idea for a new feature, came to me when we was having trouble with our boiler. So the idea is tado could notify you (via the app) if it detected a possible problem with the boiler. I think this could work by tado noticing if it turns the boiler on but the heat is not increasing. As at the moment tado stays the heating…
-
Lower flow temperature for nighttime use
Our heating is working beautifully but given gas prices and the cold, we would like a more cost effective way of keeping bedrooms warm in the winter. In practice what happens today with our tado and viessmann 200 w digital link is that the valve in one or two bedrooms partially opens every hour or so to keep the bedroom at…
-
jamming of the needle which open and close a valve body
Je voudrais faire une suggestion d'amélioration à Tado: J'ai observé à de nombreuses reprises des blocages des pointeaux qui ouvrent et ferment un corps de vannes lorsque celui n'était pas actionné pendant un moment. Ce phénomène de grippage peut se produire en été mais également en période de chauffe dans des pièces…
-
Expand Tado product line: Radiator fans
Hi, I'd like to make a suggestion to expand the Tado product line to include Radiator fans. In my country, The Netherlands, it's mostly standard to have central heating, with radiators installed throughout your home. Since we have a mild climate, a way of projecting heat (like an A/C) is very rare. Radiator fans have shown…
-
Notification on Phone when Window is Open
Would it be possible for the Tado app to create a notification pop up on your phone to let you know that a window is open?
-
Add option to reboot devices overnight
To improve resiliency, add an option to reboot all of the devices every night. Either the whole system or on a per device basis.
-
Either block or support being a member of more than one Tado home
I accepted a membership request from my son’s Tado and it wiped my App configuration. Was a nightmare to get sorted. Either block accepting a request if you already have a membership or support multiple homes in the app properly!
-
It should be possbile to select the wanted fan speed at Homekit, IFTTT and other services.
I just bought a new Tado Smart AC Control V3+ to control my Mitsubishi Electric FH35 heat pump, based on the measrument from external Netatmo- temperature sensor. First I integrated Tado to Apple Homekit, but when I created on automation (such as "if temperature is below 22c, set Tado for Heat mode"), I noticed that I…
-
widget for geofencing
dear community, it would be nice to add a widget to the app to provide the possibility to manually toggle the away/home from the phone desktop