-
Go back to %%%%%
I have two wireless thermostat sensor And before I could see The percentage of use of each one Now it's got updated with a graphic That doesn't specify each one consumption If it keeps like that I won't renew the annual subscription Before if I spent €100 i could divide the expenses for each sensor now I can't Or can I ?
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
What do you think of this ? Improvements for Time slider for changed schedule
The time slider (see screenshot) is difficult to operate, the the scale is too small. The time changes are therefore not precise. A few ideas (see screenshot edited) Make the slider as big as the temperature slider (vertical) Display the future end time immediately, not when letting go of the slider (eg. +2h 30 min)…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.
-
Manual Control on tado° device doesn't work.
This used to work, now it doesn't. Timer set to 20 min. Heating on via manual mode. Schedule set to infinity, but should be to 20 min. Also, the app doesn't remember the last state, so every manual setup starts from 'until you resume' mode. ¯\\\_(ツ)\_/¯ Please can this be checked & confirmed if a bug or a feature?
-
Ecran histogramme
Bonjour, j'utilise un smartphone Android . je constate que si l'option "Sombre" est activée pas de Température ni d'heure présentent sur l'écran BàV
-
White text on grey background (Temperature graphs in dark mode)
I'm using general dark mode on my device (Android) With the the latest application update the inside and outside temperature display has been changed from black text to white text (on a light grey background. The text has become unreadable. Can you change that back please ? Edit: additional info, In normal (non dark mode)…
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Suggested schedules to save energy
I know this would potentially be a nightmare and long term investment on tado's part but for those with trvs it would be possible, after maybe a year's worth of data from a property to learn a user's preferred temperature, time to heat each room, time for room to cool by X degrees thus understand thermal efficiency of each…
-
Visualize heating requests of all rooms in 1 graph
In the app I can see the temperature and heating request of a room. I would like to see the heating request of each room in a single graph, preferably over multiple days. I made the graph below using the API in just a few hours, and I think Tado should add such a graph to the app as well.
-
Hot water not working? You need the room temperature sensor
I have just set up a tado system for my elderly mother. She has only 4 radiators and a hot water tank in a Y-plan configuration. I put smart TRVs on the radiators and they were working to plan, but the hot water did not work. The wifi receiver seemed to be refusing to configure to the Y-plan, reverting constantly to a…
-
Smart AC delayed start
With tado smart AC a schedule can be configured. Although this works fine it would be great if it would be possible to choose a mode, duration and set a delayed start time for the airconditioning. I do not find the smart schedule super useful since I don't have a fixed schedule wherein I use them. Therefore it would be…
-
Temperatura maxima termostato radiador
Hola, sería posible incluir una opción para modificar y reducir la temperatura máxima de 25 grados centígrados que puede seleccionar manualmente en los termostatos del radiador. Es demasiado fácil "girar" el control al máximo. Teniendo en cuenta el deseo de todos para ahorrar energía, sería bueno poder restringir esta…
-
Room layout
Hi. I have two thermostates and a temperature sensor in the same room as well as two adjacent rooms with similar setups and mostly opens door between the rooms. If one could define the room layout defining the position of each device, it could potentially help create the best distribution of the heating
-
PAYG tariff rates in energy IQ
Pay as you go tariffs often have 2 rates. A higher rate for the first few kwh of energy used, and a reduced rate for any additional usage. For energy iq to give accurate estimates for people on pay as you go tariffs the app needs to be able to be told the full tariff details Ie X £amount for first 2 kwh of usage . Y…
-
Advanced smart scheduling
Many people work shift patterns that require a different heating schedule each week. Would it be possible to have advanced scheduling to cover multiple weeks? Ie the ability to set a heat schedule for one week, and then have it repeat every x amount of days/weeks? In exactly the same kind of way you set up repeat…
-
Geofencing by person
In a multi-person household, geofencing could be tailored so that one person leaving could adjust part of the house leaving the rest heated for those remaining inside. So if I go out, for example, the room I use most of the time could be left unheated, but other rooms still follow their usual schedule.
-
consumption in kWh
The display of consumption should always be possible in kWh even if measured in m3. The conversion rate varies but typically only changes slowly and by country - and it could be over-ridden by the user if wanted.
-
Better Boost Options
I was pleased to see the boast function for the system but very disappointed that you can't select the temp (25 is way to high for my house), or select to just boost one room/trv. I find that I often want to boost a room for just 10mins, and only being able to boost for 30mins at 25 is wasteful and unnecessary. I see that…
-
Current temperature on TRV when in child lock
I was surprised to see that when the Child Lock is set on the Tado TRVs, you can't get the current temperature to show. When you physically touch the unit it shows the target temp but not the current one. It would be really useful if you could add this, as it saves opening the app for the current temp.
-
Auto meter readings
The App needs to access meter readings automatically if the Intelligent IQ is to be any good Apps like Hugo already do it, the Tado app should too
-
Temperature and Humidity Graph
Please return the time stamp on the slider within the graph. I can no longer tell what time the temperature drops or rises occurred.
-
Multi Tenancy
It should be possible to manage multiple houses or buildings from a single login instead of having double accounts.
-
Merged: Setting the boiler's heating water temperature via the app (just like hot water)
This discussion has been merged.
-
Cleaning Mode
Hi, I was thinking that it would be a good idea to have a cleaning mode toggle in the app that would disable all thermostat radiator valves (or enable the child locks) in 1 go so that temps are not changed during cleaning. Thanks
-
Possible improvements to this forum
Just joined this community group and struggling to know where to post ideas. It might help if this thread (suggestions, ideas and improvements) could be further divided into: Suggestions Interface design ideas (fonts, layout, navigation, terminology, colours etc.) System logic (setting temperatures and programmes etc.)…
-
Manually pre-set times for "Away"
I don't use Geofencing as it doesn't work well for our use case (we often have baby sitters over and also we're often at family houses who live on the same street). It would be nice to manually be able to pre-set times for "Away". E.g. Set to Away mode from 13:00 to 17:00 (on my old Honeywell thermostat this was called…
-
Preheater Control
I was hoping my Tado controller would be able to have some control of the preheater on my boiler. This feature is great for quick hot water but a real energy zapper. I wanted the Tado to activate this feature as part of my scheduled hot water times, first thing, and a few hours early evening, but not active when I am using…
-
Themed icon for Android app
Since Android 12 or 13 apps can provide a themed icon that blends in nicely with the new visuals by adapting to the current accent color. Could you please implement it for tado as well?
-
Add choice in default setting when battery is dead
When the battery dies on the v3 thermostat the Central heating goes full on. If your not home to notice this in time you might have a big problem, or at least a free sauna. The normally open or normally closed mechanic inside should be changeable. I understand that heating in nordic countries might prefer to have to more…