-
Switch off bridge LEDs/Extinction des LEDs du bridge
I would liké to Switch off LEDs on bridge. Brigthness IS toi high and it could save energy. Bonjour, J'aimerais pouvoir éteindre les LED du bridge qui éclairent tout mon salon et ça ferait aussi une économie d'énergie. Merci
-
User-defined temperatures and schedules to speed making changes.
Motivation is to minimise taps and clicks to change room schedules in many real-world scenarios. All of this is just software with no implications for the hardware/electronics. Temperatures: Allow user named temperatures, eg 'Toasty' = 23, 'Warm' = 21, 'Eco' = 19.5, 'Night' = 17, "Away" = 6. These could then be applied by…
-
To support measurement units ft3
As soon as I subscribed to the auto-assisted plan, I cancelled it. Why ? Because it does not support measurement unit ft3. Tado PMs and senior executives probably not understand the fact that smart meter owners usually have what Tado Energy IQ is offering from their energy suppliers. Tado should aim as the gap in the…
-
Vision problem using website
I have slight vision problems distinguishing between different colours. Your website prints its headlines in pale yellow on a white background or white text on a pale yellow background. Could this be changed for those of us who have trouble deciphering what it’s supposed to say?
-
Enhanced Alexa integration
The tado app is great and the functions for my AC are as you described, however the control from Alexa is limited to on, off, heat, cool and temperature. I asked if you will be adding more commands for the new features of the update you mention, like fan speed, fan only mode, swing, and led on/off.
-
Heating report archives and access to more heating data.
I'd like a heating report information system that would show heat loss from particular temperatures and particular weather so it would a really easy route into changing to ASHP as you'd already have a comprehensive lot of information. The day graphs are there but you can't see more than one at a time. In the phone app you…
-
Bring back Modulation (OpenTherm) to their wireless thermostat (UK)
Currently only the wired version supports modulation (OpenTherm) where as the wireless version in the UK ONLY does not support modulation. The EU version does. I think Tado should bring the EU version features to the UK product. It's essential for energy saving and would add more competition to the market and make Tado…
-
Enable manual override timer when 'Turn off all rooms' has been enabled
I am writing this as the 'Turn off all rooms' button looked really useful but then if someone turns up a rad it will just stay on rather than turning off again in line with the manual timer selected. For example select 'turn off all rooms' in summer and if there was a particularly cold room or cold night then anyone in the…
-
Use Room Thermostat for a room without Smart Radiator Thermostat
I have one room that has a radiator where I cannot fit a Smart Radiator Thermostat. It is a Vasco design radiator that has a specific temperature thermostat: Since this is my living room, where I would like to heat just this room in evenings, my idea was to set this open when there and turn the Room Thermostat up. My…
-
Possibility to expand options thermostat clock/ Mogelijkheid thermostaatklok uitbreiden
My feedback and question: currently it is not possible to indicate in the app that you are away for several days (for example, a week) and that it is then automatically switched to the usual schedule.That would be a big advantage over the option that is now available, where you can only set 12 hours from the current time…
-
Visual indication of valve open in app
Please can you add a small indication on the Home Screen for each radiator valve block, to show if it is open or shut. The “heating to” message/colour coding is a bit woolly. Same within the individual valve detail screen.
-
Wireless thermostat always on display
I'd like the wireless thermostat to constantly display the room temperature
-
Always on display for wireless smart thermostat
Please enable the feature to allow always on display of room temperature?
-
Change your business model. Build your userbase and products
Tado, I like your products but it's clear from the forums that development is slow and users get frustrated with a lack of progress on features that should be there I feel that your business model of selling hardware to users is partly to blame here as once you've sold the kit, you have no income stream to fund new…
-
Start
Waarom laten jullie niet meteen op het homescherm de ingestelde en huidige temperatuur zien. Nu moet je telkens per ruimte bekijken
-
Central heating output temperature setting, manual pump activation and some other items.
Hi all and Tado, With winter coming up and having used tado for quite some time already we can say we're satisfied with how it works. But there could be a few "upgrades" in the app and possibilities. first of it would seem a good idea to be able to set the central heating output water temperature as well, same as how you…
-
Message if thermostat goes offline
It would be very helpful if, just as you do now when a device battery goes low, you were to send out a text message when a device goes offline.
-
Internet bridge extender
I need an Internet bridge signal extender for a total coverage of the house.
-
Smart AC Control V3+ doesn't support ECO mode for Mitsubishi airco's
I am the proud owner of a Mitsubishi airco and a the proud owner of Smart AC Control V3+. I would like to move to using the Tado Application only, but unfortunately it doesn't have the ECO option which the normal Mitsubishi remote control has. Could this please be added in future releases? Thanks, Gerard.
-
Turn Off Individual Room
Currently we can turn off the whole heating system with the touch of a button, or we can go into an individual room and change its schedule to get the temperature down to a level where the heating won't kick in until it gets to the frost protection level. But with this cost of heating problem we've got, I would like to be…
-
Heating Activity Filter
Please add the ability to filter the Heating Activity list so that I can see only the rooms that have a zone controller assigned. The heating activity list shows some rooms calling for heat when other areas are warm enough. It'd be good to be able to switch.
-
Aggiornare APP
sarebbe ora di aggiornare l’app e rendere possibile avere più HOME Utilizzare 2 telefoni o dover uscire dall’app è oltremodo ridicolo e non all’altezza dei vostri ottimi prodotti, nonché una funzione ormai disponibile praticamente in ogni app di allarme e controllo remoto. Credo sia doveroso per il vostro reparto tecnico…
-
Allow naming of smart radiator thermostat
It would be really good if I could assign names to all of my smart thermostats. It would make it so much easier to identify which one needs its batteries changed.
-
Vaillant VR66 compatibility
Tado was compatible with the discontinued VR65. It would be very helpful if you could make it work with the current VR66 model.
-
Hybrid Heat Pump support [Atlantic Aurea 5 R32]
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermostat. If plugwise can control the hybrid system, it should be trivial for tado to do the same thing. I would like to remove…
-
Honour Schedule While Offline
My Tado keeps disconnecting from the internet (the only device on my network with this problem). This means the schedule to power heat for 0630-0700 doesn't come on, meaning no hot water for a shower! 🥶 Could the schedule be pushed locally onto devices which are connected to power, but disconnected from internet?
-
Adding the "Disease" scheme
I am asking for the option of setting one "button" of the sickness scheme, when the heating of rooms that are switched off according to the plan needs to be urgently addressed, because normally during the day there is no need for heating in these rooms. But in the case of Home office, illness, etc., the heating scheme in…
-
Window opening time
I am asking for the possibility of extending the time of the open window, at least for 3 hours. This longer time is necessary, for example, in a family house, where the humidity in the bathroom needs to be ventilated through the window.
-
Ability to add notes to statistics graphs
Just had a thought regarding the temperature graphs. It would be nice to be able to add notes to it, to better understand how our actions impact the temperature in the house, and/or heating use. This could be things like manually adding when windows were opened (if not detected automatically), or when hot appliances were…
-
add a choice between 0,1 OR 0,5 degreechange in the app
I disagree with only 0,5 change. I bought a Tado for its flexibility with 0,1 degree changing. Now it is 0,5. Why nog helping both with a choicepossibility in the app: 0,1 OR 0,5.