-
Enable Tado to use other temperature sensors via HomeKit
It would be very helpful if Tado could utilise existing temperature sensors that are also connected via HomeKit. I have several existing temperature sensors in my house(e.g. Netatmo) and don't want to have to buy additional Tado ones simply to get meaningful room values to control my heating. The smart radiator valves are…
-
Smaller wireless Thermostat
Your platform desperately needs a smaller wireless Thermostat. I just watched a review of a competitor and they offer one. You need a wireless Thermostat with no controls that simply reports the temperature in a room as your TRV are hopeless at reporting the true temperature This other platform offer a stand alone…
-
Individual Room ‘advance’ option
I can’t find the roadmap but has it been considered to add an advance option for individual zones to either advance from off to on, or on to off. Or allow the boost function for individual zones, rather than to current option to boost all zones?
-
Full API release - Open source
API Release: One of my major concerns I have is I am now very reliant on the Tado eco-system. My concern is that at some point in the future the tado bubble may burst and their cloud services stop functioning. This will not only mean I cannot enable my heating but the entire eco system will fail. The improvements coming…
-
TRV with empty batteries closes valve, but keeps requesting heat
The batteries of my TRV were empty and I received this email from Tado: > When your Smart Radiator Thermostat does not have enough charge to function, it will automatically close the radiator’s valve and the heating will remain off until you replace the batteries. Sure enough the valve was closed and an empty battery icon…
-
Interface (Home Screen)
Hi, after a couple of week using Tado, I have some suggestions :-) 1) make it possible to choose a day of the week and see the day schedule of the devices 2) increase the font size of 'set to/heating to' information 3) add the humidity % to the buttons (also in readable font size) 4) add 'HOME/AWAY' button at top of the…
-
Increase Zone Controller Room Limit
Backstory: I have reached my limit for number of rooms connected to a single zone controller which currently stands at 10. Trouble is of course the typical UK household only has one thermostat, so when you switch to tado it's only possible to wire in one main controller. For a medium size house (or bigger) there is enough…
-
Energy IQ - Brennwerte & weitere Daten
Hi, zunächst mal: Die Energy IQ Funktion ist echt toll! Wir geben immer Kubikmeter-Werte unseres Gaszählers ein. Der Preis ist allerdings in €/kWh. Es wäre erstens toll, wenn man den Preis noch akkurater angeben könnte (in Cent/kWh bspw, und vor allem, wenn man die Brennwerte sowie Zustandszahl des Gasversorgers angeben…
-
Wireless Thermostat to just heat one room?
Hello, I have a wireless thermostat installed in my living room. I installed a Tado smart radiator valve in the bedroom. When I switch the bedroom smart radiator device on, the living room radiator also comes on and heats the living room. Is there any way of setting up the system so that when I want to heat the bedroom…
-
Add a lock mechanism to Smart Radiator Thermostat
Currently anyone can easily unmount Tado Smart Radiator Thermostats, accidentally or on purpose. This can damage the device. Users other than the owner/maintenance team should not be able to unmount the Smart Radiator Thermostat. Please add a lock mechanism to prevent easily unmounting the radiator thermostat.
-
Auto meter readings
The App needs to access meter readings automatically if the Intelligent IQ is to be any good Apps like Hugo already do it, the Tado app should too
-
samenwerking thermostaat & slimme airco bediening
Ik ben op zoek naar een mogelijkheid om mijn airco units slim te maken maar ook om deze samen te laten werken met de thermostaat. Bijvoorbeeld, ik wil 's morgens het huis opwarmen (o.a. vloerverwarming) met de CV ketel waarna ik het huis op temperatuur wil houden met airco units. Ik ga nu met home assistant beide…
-
Activity indication on Home page
It would be great to have an indication of c/h current activity in your home. This can be as simple as the 3 wave bars, as seen when you go to each room individually, all ‘“or’ed” together displayed at the top of the home page. This allows you to know at a glance what is currently happening with the system. E.g A room is…
-
Manual/ schedule indicator to show on dashboard tile
I have Tado in my house and I love the flexibility of the system, especially as a user can turn up or down a room as they need. By often the manual intervention means that stat is the set to remain like that until it is returned to automatic either by the stat or by the app. Can we have an indicator in the app that shows…
-
Set "away" the separate room
The geofencing can switch off the heating of the entire house. But, the possibility of the setting one room is missing. For example, the children are out for one week. Why fully heat their room?
-
User specific Heating schedule
It would be very helpful if there would be the option to have user specific heating schedules. I travel for work but sometimes I work from home. Would be great if Tado would recognise that and switch heating off in the office when I am away. Could that be integrated please. Thanks
-
Geolocation for individuals in household
Hello, I would like to have the possibility to switch off the airconditioning when one individual in the household is away (in their room). This while other systems stay on. I now can only set 'away' for the whole family.
-
Individual Smart Thermostat Rad Control
I know there is a button to turn off all thermostats but it would be useful to have the facility to turn off individual stats say when someone not going to be there during the scheduled times set for that room
-
Geo/account koppelen
Om bijvoorbeeld 1 kamer aan 1 persoon te koppelen zodat als deze persoon de woning verlaat de verwarming reageert op de geo. Dan zou je het account van deze persoon/ telefoon aan een radiatorknop/pen moet kunnen toewijzen. Nu reageren allen knoppen op de geo van iedereen. Je kan alleen knoppen uitsluiten van geo. Toewijzen…
-
Profile related away mode
A possibility could be to relate and correlate the away to different profiles. When one Profile-A and Profile-B are at home ALL the house will be warmed. When profile-A and Profile-B are out ALL the house will NOT be warmed When profile-A is at home and profile-B NOT only commons rooms and profile-A related rooms will be…
-
Geofencing options that activate when a single user is home/away
We have a office which is used mainly by one person. Currently geofencing only kicks in when all the users are away. It was be great to link a room to a single user, so that the home/away status would follow just that user. This would allow us to turn heat to the office on and off based on if the primary user was out of…
-
Per room HOME/AWAY status
I would like the ability to set a home/away status to individual rooms. That way, the main home/away status can be controlled when someone is home/away, but if a home member is away for a week say and their bedroom is set to away, tado won’t heat their room, just the occupied rooms.
-
Be able to name devices rather than refer to them just by number
I would like to be able to name my Smart TRVs rather than them being numbers only. It would then be easier to know which one needs new batteries when the email comes through if there are more than 1 device in a room or area.
-
Combine Rooms & Settings with Home Tiles
It would be much more helpful if you could see the details of the radiators and room under each tile – particularly the battery status.
-
Verwarmingsstatus in tegels ruimten
Ik zou het handig vinden als op het thuis scherm in de tegels rechtsboven de 0/1/2/3 verticale golfjes zouden staan. Dan zou het in één oogopslag duidelijk zijn te zien welke ruimte een actieve warmtevraag heeft en of dat overeenkomt met hetgeen jezelf verwachtte.
-
Allow users to set/adjust the Early Start option
Tado offers an Early Start (pre-heat) option for ‘slow response’ heating systems like underfloor heating. When used with my Air Sourced Heat Pump (ASHP) this switches on heating far too early. It would be helpful if users could set a more suitable pre-heat factor to better match different homes and heating systems. This…
-
Pausing a room
It would be great to be able to pause a room. Tado is great at providing granular control of each room. But for schedules - its only possible to operate at a whole house level. Either i can turn off "all rooms" or "Boost all rooms". being able to turn off or pause a room feels like a pretty useful and essential item. the…
-
Worcester 8000 style
As worcester 8000 style is one of the most popular boilers in the uk. Would be great to get compatibility with ebus
-
Allow user to turn off partial opening of thermostatic valves
The ability of the thermostatic valves to partially open allows the Tado system to better regulate temperature and avoid overshooting target temperatures. However there is an energy efficiency cost. I live in an old house where many central heating pipes travel through unheated voids in the loft or under floorboards. If I…
-
toggle switch for schedules
hi there, my suggestion/idea is for a toggle switch for different schedules. my line of work demands that every other week i have a different schedule. one week I work in the morning, I start to work at 7AM, the next week I work afternoon, I start to work at 3PM. And then again in the morning... it would be great having a…