-
Backup settings
Problem - other members of family mess up carefully programmed heating schedule. Solution - access rights of other users limited or way to restore backup settings to revert to original schedule.
-
Individual Smart Thermostat Rad Control
I know there is a button to turn off all thermostats but it would be useful to have the facility to turn off individual stats say when someone not going to be there during the scheduled times set for that room
-
Hot water stats
Any chance to have stats for the hot water? At the moment it is impossible to see how long the hot water has been on for a day/week/month/etc I can see when the boiler has been on but just for heating.
-
Better Boost
Please look into allowing the user to control the temperature of the "boost" facility. 25°C is way too high
-
AM/PM & 24h time format
Please make 24h time format available, either based on system (phone) settings or by choice in the application. AM/PM doesn't stick in my head.
-
Integrate Enerqy IQ with smart meters
This interface is technically possible - as an example the free Loop app already connects to smart meter data and manages it well..... https://loop.homes/
-
Energy IQ with Prepayment Meter
Add the ability to use Energy IQ tracking with a prepayment meter. It can be used currently but I have to manually calculate units used since the first reading. Keeping track separatly of how many unit have been added to the meter. It should have the ability to add how much is left on the meter by day and also to keep…
-
Relay and Opentherm together
The Tado extension kit can control the boiler through a relay (simple on-off switch) or through the Opentherm bus. The bus allows for better temperature stability and higher efficiency as it tells the boiler to turn the heating up or down as necessary. If a heating system contains other elements, like a shut-off valve or…
-
Report all disconnections/failures clearly in the app
Some device disconnections/failures will immediately show in the app via a change in the icon for the relevant room and changes to the reporting in the climate chart. However other devices are for some reason set up to fail quietly. For example an extension kit controlling the boiler can disconnect and the user will not…
-
Way to manually signalize open windows
Hi, I've noticed, that sometimes the App does not catch the fact that the windows are opened. I'm not surprise, because during relatively mild spring or autumn days the temperature outside may not differ that much from the inside, and as result the change in temperature may not be that dramatic for algorithm to pick it up.…
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Active/Passive mode for TRV's
Whilst running the TRV's last year I noticed a couple of issues. 1 - As each TRV called for heat at slightly different time, the boiler was constantly having to bring water up to temp to heat an individual room 2 - To try and avoid this I was having to set heating much lower in parts of the house increasing the risk of…
-
Geolocation for individuals in household
Hello, I would like to have the possibility to switch off the airconditioning when one individual in the household is away (in their room). This while other systems stay on. I now can only set 'away' for the whole family.
-
Beta channel
I did sign up to the beta version of the App, and it would be great to be able to: See the a brief list of changes (new features / fixed bugs), so one could look closer and test it Get a button directly in the app, that would allow to provide a feedback in a form of a bug/ticket with few clicks directly from the app Unless…
-
Missing data in web-app
Hi Tado´s I really miss the fact that in your browser app there is access to the same data about operations as in your Google app. When it is found on the mobile, it means that the information has been collected about how the individual thermostats operate, heat, humidity, etc. But in your web app, keg can only see a very…
-
Go back to %%%%%
I have two wireless thermostat sensor And before I could see The percentage of use of each one Now it's got updated with a graphic That doesn't specify each one consumption If it keeps like that I won't renew the annual subscription Before if I spent €100 i could divide the expenses for each sensor now I can't Or can I ?
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
What do you think of this ? Improvements for Time slider for changed schedule
The time slider (see screenshot) is difficult to operate, the the scale is too small. The time changes are therefore not precise. A few ideas (see screenshot edited) Make the slider as big as the temperature slider (vertical) Display the future end time immediately, not when letting go of the slider (eg. +2h 30 min)…
-
Early Start Programming
I like this feature but it would be better, and save more money if you could choose which time block it works with. For example I want it first thing in the morning but don't want it for the afternoon starts.
-
Manual Control on tado° device doesn't work.
This used to work, now it doesn't. Timer set to 20 min. Heating on via manual mode. Schedule set to infinity, but should be to 20 min. Also, the app doesn't remember the last state, so every manual setup starts from 'until you resume' mode. ¯\\\_(ツ)\_/¯ Please can this be checked & confirmed if a bug or a feature?
-
Ecran histogramme
Bonjour, j'utilise un smartphone Android . je constate que si l'option "Sombre" est activée pas de Température ni d'heure présentent sur l'écran BàV
-
White text on grey background (Temperature graphs in dark mode)
I'm using general dark mode on my device (Android) With the the latest application update the inside and outside temperature display has been changed from black text to white text (on a light grey background. The text has become unreadable. Can you change that back please ? Edit: additional info, In normal (non dark mode)…
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Suggested schedules to save energy
I know this would potentially be a nightmare and long term investment on tado's part but for those with trvs it would be possible, after maybe a year's worth of data from a property to learn a user's preferred temperature, time to heat each room, time for room to cool by X degrees thus understand thermal efficiency of each…
-
Visualize heating requests of all rooms in 1 graph
In the app I can see the temperature and heating request of a room. I would like to see the heating request of each room in a single graph, preferably over multiple days. I made the graph below using the API in just a few hours, and I think Tado should add such a graph to the app as well.
-
Hot water not working? You need the room temperature sensor
I have just set up a tado system for my elderly mother. She has only 4 radiators and a hot water tank in a Y-plan configuration. I put smart TRVs on the radiators and they were working to plan, but the hot water did not work. The wifi receiver seemed to be refusing to configure to the Y-plan, reverting constantly to a…
-
Smart AC delayed start
With tado smart AC a schedule can be configured. Although this works fine it would be great if it would be possible to choose a mode, duration and set a delayed start time for the airconditioning. I do not find the smart schedule super useful since I don't have a fixed schedule wherein I use them. Therefore it would be…
-
Temperatura maxima termostato radiador
Hola, sería posible incluir una opción para modificar y reducir la temperatura máxima de 25 grados centígrados que puede seleccionar manualmente en los termostatos del radiador. Es demasiado fácil "girar" el control al máximo. Teniendo en cuenta el deseo de todos para ahorrar energía, sería bueno poder restringir esta…
-
Room layout
Hi. I have two thermostates and a temperature sensor in the same room as well as two adjacent rooms with similar setups and mostly opens door between the rooms. If one could define the room layout defining the position of each device, it could potentially help create the best distribution of the heating
-
PAYG tariff rates in energy IQ
Pay as you go tariffs often have 2 rates. A higher rate for the first few kwh of energy used, and a reduced rate for any additional usage. For energy iq to give accurate estimates for people on pay as you go tariffs the app needs to be able to be told the full tariff details Ie X £amount for first 2 kwh of usage . Y…