-
Simply show heating on and which rooms requesting on the App
When I open the app I want to (really need to) be able to simply see: Has Tado requested my heating to be on? Which smart radiator room(s) is triggering the request We've just fitted smart radiator thermostats, and our heating is on unexpectedly. Driving me mad trying to work out why it is on (or off!!!). The heating has…
-
Dry clothes function
I have a dehumidifier and together with the room humid graph I known when I need to turn heater on, open windows (when humid outside in lower than inside, it could be found in local forecast) . I see when cloths are drying by the humid going up, but after 85 it doesn't dry than I have options, open windows, turn on the…
-
Control hot water with wireless reciever from more then 1 thermostat
I have 2 tado thermostats, one upstairs and one down stairs but can only turn the hot water on manually from one of them via wireless reciever, only a minor issue but think it would be useful to be able to control from both!
-
Add silent mode to app and API
Many aircons have a silent mode for at night. I use his mode very often and it can only be enabled with the original remote. It would be great if the silent mode is added to the app and to the API so domotica developers can use it too.
-
Battery log
I have a couple of dozen devices. I'm changing batteries all the time. I can't remember when I changed batteries last. This is information that's useful to know – to monitor the quality of batteries, or usage of the devices. There's no way to do this with the current app. You change dead batteries, and if the time and date…
-
Add decimal to the usage amount
The city heating is measuring in giga joules. My usage last month was 0.356 GJ and a unit costs €45.26. Currently it is not possible add meter readings because it will be too inaccurate. So please add the possibility to have 4 digits behind a decimal.
-
Feature To Assist With Balancing Radiators
Create a feature using the inbuilt thermometer in the radiator valves to work out order to balance radiators. It could work out time to temp for each radiator and advise you if there are any getting hotter slower/quicker.
-
GeoFencing early start
SUGGESTION: Provide for GeoFencing to be programmed or set in advance. For example - I'm going out in 2 hours time. I'd like GeoFencing to start in say 1 hour. And could such programming be regular (every Tue/Fri, weekdays, etc) as well as occasional
-
Boiler Protection
As many combi boilers continue to run even after shutting off (to prevent internal overheating) Would it be possible to add a feature where you can select a room to act as a bypass valve. This would be as simple as when the command is sent to the boiler to turn off, the nominated valve opens to prevent possible damage to…
-
Allow the swapping of Smart TRV data from room to another room
What i mean is that if you need to swap a TRV from one room to another (very rare occurence) like I have had to do (moving noiser TRV from bedrooms to other areas) then i would like the option to keep the statastic from its original placement onto the new TRV. Looking at my Energy IQ today shows one room used 3m3 of gas…
-
Virtual Tado TRV as workaround for lack of a bridge range extender
As I have a large 3 storey home with a side extension for which the tado bridge cannot communicate to all of the TRV's/radiators on my property and no sight of a hardware/software fix anytime soon, I intend to implement a workaround using Samsung smartthings and some temperature sensors to give me ability for the rooms out…
-
Thread
Thread is the future of smart home connectivity and will also help people struggling with Tado range issues. Thread should also help grow network size without overwhelming the system as it becomes more resilient.
-
Hot water schedule
is it possible to create a separate schedule for the hot water when in away mode? it is really annoying not being able to adjust the hot water schedule more accurately and automatically when we are not at home.
-
Enable Temperature Sensor & Radiator Thermostat to display temperature in Fahrenheit
I live in the USA and own 4 temperature sensors and 5 radiator thermostats. The app shows the temperature settings and readouts in Fahrenheit, but the temperature sensors and the radiator thermostats do not, which makes it extremely not user-friendly for imperial countries. Furthermore, you cannot choose the choice of…
-
3 modes for radiator thermostats: Off, Open start boiler, Open dont start boiler
There are times when I'd like a room to warm up "if the heating is on anyway" but I can't justify running the boiler just for that one room, this is possible on a permanent basis by not setting a zone controller, but I'd like the ability to schedule it. e.g. In my bedroom I'd like the radiator to heat up on a morning…
-
Eco->Comfort slider for each SRT
There's a few of us that want the SRTs to work slightly differently. I want them more open so there is more over shoot and more residual heat, some want them more open to stop too much heat being returned and others want them more closed and having tight control on the temperature. I suggest an Eco-> comfort slider so in…
-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
Mixed buttons logic in the graph view
Hi, I've observed, that on the Android app, at graph view, the weather button follow different logic than the other two. When it is checked/enabled (black background) the weather data is gone, when it is disabled/unchecked (gray background) the weather data is shown. Meanwhile humidity and heating follow exactly opposite…
-
Tado A/C controller wall mount missing by design?
Hi, I have three A/C controllers and each one was only supplied with a temporary sticky pad to fix to the wall? Is this right? Am I missing a part? One keeps falling off the wall and have tried other sticky pads but none seem to work, seems a huge oversight to create something that should be mounted to the wall with only a…
-
Multi Tenancy
It should be possible to manage multiple houses or buildings from a single login instead of having double accounts.
-
Stats and Analytics
The web version simply doesn't have the Stats and Analytics, that are available in the mobile version. The latter isn't super convenient either as the number axes are changing with every screen, and the screen rotation isn't controllable, but at least it's there. I'd like also to have a possibility to export/download that…
-
Advanced smart scheduling
Many people work shift patterns that require a different heating schedule each week. Would it be possible to have advanced scheduling to cover multiple weeks? Ie the ability to set a heat schedule for one week, and then have it repeat every x amount of days/weeks? In exactly the same kind of way you set up repeat…
-
Wireless thermostat always on display
I'd like the wireless thermostat to constantly display the room temperature
-
Turn Off Individual Room
Currently we can turn off the whole heating system with the touch of a button, or we can go into an individual room and change its schedule to get the temperature down to a level where the heating won't kick in until it gets to the frost protection level. But with this cost of heating problem we've got, I would like to be…
-
Extra functie: 15 kamers ipv 10
Graag meer dan de 10 kamers die nu aangeboden worden. Dat is echt te weinig
-
Energy IQ - dual rate
I just want to suggest that in your energy IQ feature that you allow the user to enter two rates (a day rate and a night rate) if they are on an economy 7 energy deal. otherwise, this feature is useless to me. Also, most people in the UK have a standing rate too.
-
Energy IQ multi-rate unit price for Electric Boilers and real-time energy utilisation
I have a Tado connected to an electric boiler used to heat a wet system (radiators). That is pretty common in UK city centre apartments. I would like to see Energy IQ abke to differenciate energy prices (multi rate such as Economy 7 or 10) and read energy consumpton through API integration with Smart Meters or Clamp-on…
-
Single place to review when a boiler has been called for heat
You should be able to see within an area of the app, every time the boiler has been called for heat across all your devices. This would then show you how often the boiler is on, and therefore allow you to potentially reduce your energy consumption, and tweak the settings for your house to heat it efficiently and…
-
Mobile app should be near real time up to date
The mobile app lags significantly behind the thermostats and relevant heating systems. This makes it very confusing when the boiler is calling for heat, but the Tado app shows that nothing is heating. I've also had it, whereby the thermostats are saying 25 degrees yet the app is showing that no heat is being requested.
-
Lock openings
Hi! My termostat in my bathroom are connected at the bottom to my towel rack and the thermostat are very close too the heat pipe, so the thermostat belive it is warmer in the bathroom compare to actally temperature. So I wanted that to be possible to lock the openings on the thermostat without to check the temperature in…