-
Set a maximum radiator temperature, to keep the boiler condensing efficiently.
Hi, Tado achieves a lot of its efficiency by modulating the boiler temperature. However, the variability in environmental temperature makes it very difficult to produce a room temperature profile that will not a some point be caught out, resulting in the boiler going to its maximum output temperature for a short period of…
-
Add WPA3 support to AC V3+ Controller
Hi, would it be possible to add support for WPA3 to the Smart AC V3+ controller? This security protocol is becoming the new standard, and right now, at least on my network, it is the only device that doesn't support this protocol. Cheers
-
Extra safety feature
For some reason my Tado heated up to 57c after a change of installation in the setup menu. Therefore I think a check/failsafe in the firmware of the Tado for when the temperature goes up to more then 30c in a short period it should turn itself of and give a notice in the app. It melted My Tado wired where you press to turn…
-
zones
hi guys any chance of a feature that allows you to block rooms together. i.e. upstairs/downstairs/bedrooms. you could simply call them zones. if you can and the boost into this aswell so hitting "boost upstairs" would heat everything in your "upstairs" zone. tell me what you think, thanks
-
Add Humididty to Climatecomfort screen
Could you add humidity next to C° on the screen ? See screen capture Thx
-
Heating activity improvement
Hi, I believe Heating Activity tab should have an improvement in a way to show correct Heating Activity of the TRV’s which require heat. As an example I have a TRV in my basement which is an independent one, so it doesn’t call for heating. In a warm day, the boiler might be as other heat calling TRVs are not requesting…
-
2 factor authentication
Todo has a web app! It's not really comfortable to know someone can control your home just by having your login 2FA should be mandatory
-
Essential Tado App Improvements
Hi everyone, I have been asked by Tado to post my request that the IQ energy facility within our Tado Apps be updated to include our electricity readings. This because... wait for it, you're not going to believe this... So us Tado Customers can vote on whether this should be included within the App. I can almost hear the…
-
Be clearer about what caused the boiler to turn on
I have 6 smart TRVs and the Tado Thermostat. Most of the TRVs are configured without a zone controller so that they will accept heat if the heating is on, but not turn the heating on. However when they are below the desired temperature the graph shows that the heating was on in the same UI state as when they have a…
-
Add support of CAN-Bus
Many pellet boilers manufacturers (Froling, Guntamatic, Hargassner, Herz, ....) are using CAN-Bus modulating thermostats. Would be great if Tado could support CAN-Bus protocol in order to replace these thermostats, in modulating mode
-
6.38 crashes on my iOS device but 6.37 doesn’t
After reporting a crashing bug I saw on iOS. I’ve been prompted to help by suggesting a feature after relating the information that I essentially rolled back the version from 6.38 to 6.37. So I guess the new feature could be: How about new beta test 6.38 doesn’t crash like 6.37 didn’t? :) The application //started showing.…
-
Energy IQ - dual rate
I just want to suggest that in your energy IQ feature that you allow the user to enter two rates (a day rate and a night rate) if they are on an economy 7 energy deal. otherwise, this feature is useless to me. Also, most people in the UK have a standing rate too.
-
Radiator thermostat colours.
Does any one agree with me that it would be really useful if there was a range of colours for the radiator thermostats? They could be available to match the many colours of radiators that are available. My new radiators are anthracite and the white Tado thermostats seem a little out of place.
-
Boiler service anniversary date
I've just installed Tado and I'm quite impressed. A concept/product which lives up to the hype. I was though surprised that in the care and protect section though there doesn't seem to be any option to add a boiler history, eg install date and then service anniversary. An oversight when there is an option to book a…
-
"Advance Heating" Feature
This is a standard feature in most heating systems - some form of control to advance the heating to its next programmed state. Scenario - it's 22:00 and I want to go to bed early and turn the heating off. The heating is programmed to be on until 23:00. Of course if I TURN OFF all rooms that works, but the problem here is…
-
Multi-Home Tado
Would be so great to have multi home support in the app. Such a pain having to log in and out all the time. If this is complex - and I realise that not everyone needs it - how about releasing "copies" of the App so we can download 2 or 3 of them and have them logged in individually. This may apply well to everyone. I want…
-
UX improvement: long-press
Would be very nice if the iPhone app allowed me to “long-press” on a room to quickly turn the heat off or resume its schedule.
-
3rd party temperature sensors
It would be a great improvement if one could have the ability to use a temperature sensor already in the room (which is i.e., HomeKit compatible) to control the radiator valves. This will give a much more accurate temperature control in each room. If you already have a temperature sensor in the room used for another…
-
No Zone Controller via Schedule
I did search but could not find anything regarding this, I would like to see the ability to assign a rooms ability to allow the room NOT to call for heat the room during the day, and at night allow the room to call for heat. This would allow the room to not drop temperature too far during the day. What do you guys think ?
-
Google Assistant An Alexa new (hot) keywords (resume schedule or resume heating schedule)
I am missing a feature for the google assistant and alexa. Feature to say "resume schedule" or "resume heating schedule" I think that this will benefit a lot of people. when you do a manual overwrite of your schedule it does not automatically resume the heating schedule Dutch : Ik mis het commando "schema hervatten of "…
-
Notification requests...what does the community think?
2 requests I would like to see on the app: 1. The status of the heating indicator on the receiver whether on or off I would like to see in the app on the home page. I know you can see it by clicking into the individual rooms but this doesn't tell you if the heating on receiver is on or not. This only tell you the…
-
Humidity trigger
I think it would be nice to have a humidity trigger as well as temperature trigger. As an example I have a TRV in the basement where the desired humidity is btw 60-70 and the temperature is not really important. It would be great if the TRV kicks in when the humidity is as an example above 70
-
FEEDBACK
I love my TADO product but whilst I appreciate you think you’re moving into the future by only allowing online chat to consumers but for me it’s very limiting/time consuming and in my humble opinion would not make me buy your product.
-
Named schedules for different situations
I have a 4 bedroom house in which I live with my wife, however, we often have visitors. We only need certain rooms heated for our own use but we have a childrens bedroom which we want heated to a specific schedule when our grand children stay over. We also have a bedroom and bathroom which we only want to heat when we have…
-
Activate Home mode via timer or at a specific time
It would great if I could schedule to active home mode at specific time. e.g. 3 hrs before I get home from a weekend vacation.
-
Add new colour to the Temperature graph for "Early Start"
As title say's I think it would be nice to add a different colour to the graph that depicts when "Early Start" was invoked. to this graph
-
Early Start Phone App UI changes.
I was asked by Tado˚ to start this discussion, so here goes. In the Web App when the room is calling for heat due to "Early Start" it is shown in the UI like this. But, this does not show in the Phone App, so you think the room is calling for heat for no reason and can be confusing...
-
More controls over temporary temperature changes
When it comes to the room controls when you manually override the set temperature it would be good to have the following options: A shortcut to bring forward / advance to the next programmed setting e.g. if it's 1pm and the heating schedule will change from 10C to 20C at 2pm, I could press a button which will automatically…
-
Silent Operation during defined hours
We have manual TRVs before. Of course, they didn't shut off when we left the house, but at least they don't make a sound. Currently our Tado TRVs wake me up at night, despite sleeping with earplugs. The entire family are a bit surprised by the noise these TRVs make.. So, I want to suggest Tado adds a "silent operation"…
-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…