-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
RESTORE DECIMAL PRECISIO
RESTORE DECIMAL PRECISION. IT'S A CORE FEATURE! IT WAS A STUPID IDEA TO BREAK A CORE FUNCTIONALITY TO SOLVE A UI PROBLEM WITH THE CURSOR
-
Quiet fan mode - AC units
Using the setup guide, and referencing the model of Mitsubishi Electric AC units that I have, it supported a lot of the modes that are possible. One omission that I would like to have added is the "quiet fan mode". We have a unit in the bedroom that we use every night and with the IR remote that came with the unit you can…
-
App “Advance” button
I have a suggestion for the tado app. On my old boiler time controller I had an "Advance" button that advanced the settings to the next time period and then reverted back to the normal schedule once the next time period finished. On the tado app to bring on the heating earlier than scheduled, I think I have to go into…
-
Passage d'une pièce à l'autre
Bonjour, Je trouve contraignant de fermer la fenêtre de réglage d'une pièce pour aller dans une autres pièces. Il serais bien de slider pour aller d'une pièces à l'autre. Sinon l'appli est top et le matériel aussi.
-
More colours available
Everything in my bathroom is black, all switches and power outlets. Only thing white is the Tado Thermostat. When will Tado products be available in more colours?
-
Home Screen - Flag/highlight rooms currently on manual override
It would very useful to see on the Home Screen which rooms, if any, have been set manually using the app or, more likely, a radiator control (I.e. and, therefore, are not following the schedule). On too many occasions, I’ve discovered a family member or visitor has adjusted a radiator control, which has defaulted to ‘until…
-
Better Graph
Hi, I found the temperature graph lacking zoom and pointing (to have a more precise idea of the time when browsing the item). I had a Netatmo before and their graph was a little bit more usable. Cheers, lilion
-
[Released] Make the size of the current temperature in the Room Screen bigger
[tado edit]: Scroll down to see our reply from November 15th, 2021. [Original text]: On the room screen, why have Tado made the current room temperature in the room so small that (some of us with poorer eyesight) cannot see what the inside temperature is before moving the scale? this is in the top left of the screen and…
-
Usability—show visual indicator when heater is active
Unfortunately tado doesn’t give you any feedback when it’s turned the heater on or off, in my case it’s hooked up to ducted gas heating so it would be ideal to have an icon displayed whenever the heating is active (possibly subject to schedules and optional user preferences)
-
Allow display of ambient temp always on by an optional setting
The display looks great, unfortunately my previous thermostat used to display the ambient temp which was really handy. Would be great to display it all the time or on a schedule—yes I realise this will affect battery life but users should be able to choose the trade off.
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
rename Tado smart buttons
Currently it is not possible to rename the Tado smart buttons. When the batteries of one of the buttons in running low, it's quite a quest to find out which Tado button needs to be recharged, since I have multiple buttons per room. Could it be an idea to give the possibility to rename every button in order to increase the…
-
One a day Valve Push
Hi, Can Tado please implement a ‘once a day’ radiator valve push to help prevent radiator valves from seizing up over the summer months and when not used in general. Other smart radiator thermostats currently implement this and it would be very easy to do
-
Better battery performance
Rather than having good and low, introduce a medium level too. Brand new batteries show as good. Thresholds should be 75%+ Very Good Dark Green 45%+ Good Green 20%+ Low Orange 7% Very Low Red
-
Show thermostates %opening graph
Hi, i woukd really like that my thermostates % opening are showed on the graph, now we can only see how much the the valve/thermostat was open with holding down on the graph and see on the 3 heating symbols, or on the 3 gray scaled colors, thats pretty much useless,,, the system have 0-100% so why not show it on the…
-
Room specific 1h boost button
Boost button in the room tiles in the overview screen. Useful when you prepare the kids for bath or bed. I have 7 rooms/zones spread over 2 floors and I don't want to boost all the rooms.
-
More than one tado
I have a holiday home where I have installed tado and I am very pleased with the system. The remote control by phone is excellent. I would like to install tado at my main house but I can’t because you can only have one application on a phone. I think it would be great to be able to have more than one application on a…
-
Meerdere bridges in een netwerk en PoE ondersteuning
Wij leven in een huis met L-vorm, en ervaren dat het onmogelijk is met één bridge de totale oppervlakte te bestrijken. Meerdere bridges od extenders zouden dus heel welkom zijn. Mochten deze bridges dan nog PoE gevoed kunnen worden, hebben we nog enkel de netwerkkabel nodig om deze te verbinden (misschien kan de antenne…
-
Geofencing lors d'une consigne de température via l'application
Bonjour à tous, Je rencontre un souci avec le geofencing lors de l'auto-assist qui est aussi valable pour le mode absent. Lorsque j'indique une consigne de température supérieure via l'application a celle prévue dans la programmation intelligente ( que ce soit en durée, ou jusqu'à la réactivation de la programmation ou…
-
Temperature monitor of hot water cylinder
The hot water control does not really control the water in my cylinder, it is just an on/off switch. It will be excellent if Tado could come up with a compatible thermometer that would monitor the water temperature in the app. Even after spending close to £1,000 I am sometimes getting cold showers as due to some…
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
som om versus 24 hour
why not chance the app, so people have the choice to set time schedule between am pm and 24 hours schedule, IT would make i easyer for som people.
-
Daily schedules
Ability to have a different schedule every day if you want. And the ability to save the schedule to be repeated by month/season so it is easy to change betwee different schedules throughout the year very easily.
-
Increase Zone Controller Room Limit
Backstory: I have reached my limit for number of rooms connected to a single zone controller which currently stands at 10. Trouble is of course the typical UK household only has one thermostat, so when you switch to tado it's only possible to wire in one main controller. For a medium size house (or bigger) there is enough…
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Add Time Block
Currently this is quite crude. The app adds a time block from 10:00 to 12 :00. But usually the user needs to insert a split a current time block which could be anytime if the day. I suggest to move the "Add Time Block" into the Edit Time Block. This is where the Delete Time Block currently lives so this is neater. More…
-
Fix HomeKit support (round up of feature requests)
Hey tado, everyone seems to know better than you what your HomeKit support needs. Here I gather all the requests I have seen around: Allow temp/humidity sensors to be exposed independently. We bought these pricey TRVs. Why don't you let us use all their features? Expose battery levels in HomeKit. It is really stupid that…
-
Improvement to the Humidity Messages in the Air Comfort Section
Over the last few months I've noticed a lot of messages in the Air Comfort Section making suggestions about how I can improve the humidity levels in the majority of rooms. Unfortunately the messages have been misleading due to the high natural levels of humidity in the air. I suggest that the algorithms could use humidity…
-
Open window detection only when heating and without Auto-Assist
First: The automatic suspension is a really efficient tool, but I absolutely don't see any reason why we should pay for it? As I don't have auto-assist I receive a push notification whenever an open window is detected. The effort for tado of disabling the heating in the room for 15 minutes is lower than the effort of…