-
remove unneeded App icons
I don't use all functions in the app: how can I remove an Icon from the screen? If this is not possible: please add it you your list of ideas / suggestions. cheers StefanF
-
Use Smart AC Controller as Wireless Temperature sensor
If people have a Smart AC Controller it would be good if it could be used like Wireless Temperature sensor with Smart Radiator Valves. That's could be easily done through Internet Bridge, they are in the same network. In addition if AC can't heat but there is a Smart Radiator Valve in that room, Smart AC Controller could…
-
coloured tado units
I'm refurbing the house and the Tado in the kitchen is going to look really out of place with its white colour scheme strapped to an anthracite radiator.
-
Créer un vrai thermostat
Bonjour, mon idée est assez simple, se servir du boîtier tado, qui prend la température, comme un thermostat, au lieu de laisser le climatiseur surfonctionner systématiquement.
-
Range improvement and live signal strength for connection status
Please support the addition of a second Bridge to a single account - this would solve the annoying range issues with valves cutting in and out of reception. Equally the information to indicate signal strength for devices would help bridge position.
-
Helpful for Tado to revert to the original temp when turned back on again, not just the default 21C
As you can see from the screen shot below, on a Friday there are 7 different time / heating slots in one room - all of which may need to be turned off when occupied and then turned back on again - often on an alternating weekly cycle Ideally there would be a second Heating on/off toggle switch that works for the entire day…
-
Automatic temperature/ventilator speed for TADO Smart AC control.
A growing number of people use air conditioners (AC) to heat their houses (cheap, available, efficient). Temperature measurement is done in the AC unit, close to the ceiling of the room.This location results in poor temperature control in the room (stagnant warm air layer). With the TADO Smart AC control you can measure…
-
Support for Viessmann PlusBus
Since 2020 the Viessmann Vitodens 2xx and 3xx range of gas boilers do not support KM-Bus or OpenTherm any longer. Viessmann decided to "upgrade" the interface on this boilers to PlusBus. This is an in-house developed protocol which they claim is an evolution from KM-Bus. However there is zero information to be found online…
-
Open thermostat with empty battery.
It would be very helpful if there was an option in the app to leave the thermostats open (perhaps with a choice of 0-100%) when they run out of power. I currently have three thermostats, one of which constantly reports that it's out of power even when it's not, and this one also runs out of power much faster, requiring a…
-
Issues Notification
This morning the heating was registered as on but the temperature in all rooms was not increasing. I didn't notice. When I got up I noticed that the temp was low in all rooms. I checked the app and the Care and Protect part of the app registered that all valves were running at 100% but temp was not rising. On the Wireless…
-
24/7 Customer Support
This isnt a technical suggestion: tado needs a more engaging, 24/7 customer support. Monday to Friday for end user customer support is not good, especially for a service that is 100% cloud based. When something goes wrong a user needs to know, do I need to call a heating engineer or is it a fault with tado & their systems.…
-
Heating configurations
Related in a way to being able to select multiple rooms - it would be handy to be able to create heating schedules based on different scenarios, for example; working from home, not working from home, one person away etc. Would be great to switch between them and have the schedule reflect the rooms I need heated and when…
-
A must change issue for Tado!
We have a holiday home for rent, and it is very irritating that tenants can change the programs on the smart thermostat. They must be able to change the actual temperature, but not the settings and programs on the thermostat. Also kids can make changes unintentionally It would be a great improvement that changing…
-
Icons for each room type
Can you give the ability to select a range of icons that can be applied for each room that we have. The Hot Water icon is a great example of a visual icon that is easy to see very quickly. We have 14 buttons for heating rooms in our house and it would be very helpful if there were icons for different rooms. For example,…
-
Offer a cheaper radiator valve.
In rooms where a wireless temperature is used as the control device there is no need for the SRVs to be able to sense temperature. Why not offer a cheaper version which only opens and shuts the valve as demanded by the wireless sensor.
-
Room view: change from tiles to list
Hello I have several rooms, and floors, and I find since the early days that the tile view is quite confusing. I always waste time in finding a specific room. There is a lot of screen space wasted, so I must each time scroll down. On top of that the colour codes and why and how a tile would change colour remains unclear to…
-
Tado Windows Desktop App
Does this exist or are there any plans to create one? Personally I still find it easier to manage things on a desktop / laptop than a phone screen.
-
Smart AC control V3firmware 103.3 does not support quiet mode
2 x Panasonic AC & 1 x mitsubitshi A-A, all with quiet mode, which is one of the reasons they were bought. unfortunately Tado seems not to be supporting "Quiet mode", lowest setting on the fan speed does unfortunately not do it. request for this feature has been going on since 2021, how long time will it take to fix it ?…
-
Add 'Cubic Feet' to Measurement Units
I have figured out the main reason why the EnergyIQ does not work for UK users without a smart meter - the older style gas meters are imperial units, and the readings are in cubic feet, not cubic meters. Are you able to add this as a measurement unit on the app alongside cubic meters and kWh?
-
ZAPIER integration ?
Hello. Does anybody know if TADO will be allowing ZAPIER integration ? This would obviously allow TADO to be controlled by many devices on ZAPIERS list and also allow many scenarios to be played out.
-
Programmation "simple"
Bonjour Serait-il possible, plutôt que d'utiliser votre programmation intelligente qui est une véritable "usine à gaz" a programmer de pouvoir simplement démarrer et arrêter a une heure dite tout simplement !! Début à: , Fin à:, Froid ou Chaud, Température et c'est tout ! Merci d'un retour PS J'ai eu plusieurs échanges…
-
Provide configurable option for TRV to be a zone controller
I have noticed that in Energy IQ certain rooms consume more energy than others with Bathrooms, and Kitchen being higher on the list. Although these rooms are smaller, it is clear that the temp drops quicker due to ventilation and extractor fans. As such these TRV's switch on and call for heat at times that the boiler would…
-
Return to schedule in Alexa
Through Alexa routines I can use my Hue remote to turn up the heating in the room when I turn the light on which is great. But the only option is to turn the heating off or to a set temperature when I turn the light off. Would be useful if one of the options was return to schedule.
-
POE ethernet
Make a power connection for the "Internet Bridge"using the POE option of a ethernet-switch. It will bee much easy to connnect the "Internet Bridge", just one wire. Best regard Peer Herbsleb
-
Compatibilité ELM Leblanc egalis ballon icondens
Bonjour, Le Tado v3 n'est pas compatible avec les nouvelles chaudieres Leblanc. Le sera t il? Merci
-
Geofencing able to adjust individual rooms
Would be a great feature if geofencing could turn on/off an individual’s room if they are not home instead of everyone having to be out of the house
-
MFA - 2FA authentication for increased security
Hi, A bit surprised that no 2FA is offered/configurable for increased security when signing in and/or starting the application. (And possibly but overkill linking it to actions in the app (home/away, changing schedule, .....) Other smarthome apps - MyQ, iRisco, Ring, ..... - all have (added) this feature to avoid…
-
Standing charge for energy IQ
It is well know factor within UK for all the providers to charge daily charge (standing charge). Could you please include this option within Energy IQ to be able to set and see the graph with or without (with slider ON/OFF)to represent monthly charges. This will vastly improve accuracy or shown readings in correlation to…
-
Improve Scheduling Functionality
I think it would be amazing to see the following added to the Tado platform\app to improve functionality and usability. Multiple schedules - This improvement is a must, there needs to be an ability to have multiple schedules per room in place to allow users to manage heating in their homes for different times of the year…
-
Much better support for making a regular water-based underfloor heating system to smart
Hey! It is really good about tado, that you can make your regular radiator into a smart radiator with a device without having to change the system or even call a repairman, but I feel to make a regular water-based underfloor heating system smart by tado is much more complicated. I think I have a typical setup: The easiest…