-
Use Smart AC Controller as Wireless Temperature sensor
If people have a Smart AC Controller it would be good if it could be used like Wireless Temperature sensor with Smart Radiator Valves. That's could be easily done through Internet Bridge, they are in the same network. In addition if AC can't heat but there is a Smart Radiator Valve in that room, Smart AC Controller could…
-
Auto heat/cool boost
Thermostat automatically lowers or raises temperature if temperature hasn't reached set temperature. I.e if the AC is set at 22°c and the room temperature hasn't dropped to that temperature the thermostat will tell the AC to cool to chill lower than what's been set untill it gets to 22°c. Therefore making the condenser…
-
App improvements please!
1) It would be really good if we could see the average house temperature across all smart radiator valves in the wireless temp sensor and then have the option to boost ALL to a set temperature and not just 25c. 2) Being able to manage the boost funtion better (e.g. boost lounge & office together for a set time), so maybe…
-
Interior air quality data
The interior air quality data is debatable as there is no physical sensor, and it is even more misleading with open window detection disabled. I suggest that this feature be redesigned/revised. Tado° External sensor(s) Average ppb 113
-
Limit boiler output
As someone who has a Tado extension kit, wired into my boiler using Opentherm for modulating control, I'd love to have the option to limit the maximum output that tado can call for. Perhaps even on a room by room basis. The default is that tado will call for maximum output if the temperature of a room is quite cold.…
-
Save(Export) and Load(Import) room settings
Hi. I really like the Tado system, but would it be possible that you can add a Save/load feature for the room settings. It would be great to be able to save a "winter" configuration, which has different timings and settings compared with a "autumn" set... for example, in autumn we would like to have 3 radiators turning…
-
Push hors domicile
Il est en général inutile de vouloir activé le mode "hors domicile" quand le chauffage est mis sur "hors gel"
-
Smart AC Control V3+ air purifier function
Hi, some air conditioners have an air purifier function. can you add this function? info : tekno point skiv air conditioner with the RA1A2 remote control
-
Smart AC Control V3+ sending the temperature measured by the Smart Thermostat to AC
some air conditioners have a function allowing the remote control to send the temperature it measures. with my tekno point skiv air conditioner with the RA1A2 remote control, the function is called "I FEEL button". could you integrate this functionality, so that the smart thermostat sends the temperature measured by the…
-
Ampliar el número máximo de habitaciones controladas por un controlador
Veo interesante poder controlar más de 10 instancias con un controlador. En mi caso, tengo 10 cabezales termostáticos, una por habitación, y si instalo un cabezal adicional en un dormitorio distingo no podré controlarlo.
-
Allow heating of rooms that don't have a tado device installed.
I have some radiators without a TRV. Would be good to be able to heat them up i.e: turn on the boiler with the thermostat, but turn off all the other radiators that have tado Smart TRVs.
-
Princess Air Conditioner
Please make the Smart AC Control compatible with Princess Smart AC 9000
-
"open window detection" online when heating is on...
during the summer i still get (lots) of "open window detected" notifications. but the heating is not on... would be great to only get this notification when energy can be saved
-
physical child lock to prevent removing tado knob from radiator
My 11 months old son is removing the smart radiator knob from the radiator (likewise how I would change the batteries). This opens the valve of the radiator completely and he can burn himself to the radiator. Please design knobs in such way that they can't be opened and removed that easily. Thanks
-
Single graph to show when heating was called
I have an interesting situation where according to my gas meter I'm using gas during the night, however there's no simple way to see which room is causing this to be triggered without looking at each graph in turn. Can we have a single graph which shows when heating was called for each room please.
-
Varios termostatos y varias válvulas termostáticas
Buenos días.yo ya tengo en dos viviendas los termostatos y cabezales termostaáticos Mi duda es la siguiente.Tengo un hotel con tres zonas gobernadas por bombas y termostatos independientes .Quiero montar Todo cableado.Mi duda es la siguiente: *Quiero poner en cada habitación una válvula termostáticamente .Puedo hacer q…
-
Display on/off on home screen
It would be good if we can see which radiator is on or off without having to click into the room.
-
Unlock SRT manually
Would it be possible to allow a feature (that can be activated or not) to manually unlock the SRT using a 3 digit “code”. You could configure a code in the app and then input it using the SRT, turning it up and down in a certain sequence (like for safe) to input the code to unlock it when you don’t have your phone.
-
Hot water control when away
At present if your geolocation setting is set to away then the hot water status can either be on (constantly) or off. This does not work well if you have a regular heating pattern for water (say 3 times a day) and you are out during one time period which stops the heating cycle. It would be better to give an option to…
-
Master temperature
I’d love it if there was a way to have a unified master temperature. It’s always baffled me why you would not have the option to set the temperature of the rooms/thermostat and then just alter the on off times.
-
Improve wireless temperature sensor clip
The clip that attaches the unit to the wall mount (backplate) does not hold the unit in place well enough. Even when taking the unit out of the original packaging the clip didn't hold the backplate and the sensor device together. It's only a 1/4mm half spherical bump and doesn't seat strongly enough. I reported this to…
-
easier accommodation of Landlords for BTL properties
Hi, I have Tado in our home. We have smart thermostats on all our radiators and I really like the system. I am also a landlord for 2 BTL properties and wondered about setting it up in them. I can't see how to go about this with the current system. I wouldn't want tenants to pair devices to their own account, because…
-
Booster
I think it would be a good idea to have the option to add or remove the booster button on the app as some time it get pressed by mistake and it cost a lot more to use as well due to high prices of gas
-
Colour coding for rooms heating up
Can I suggest using a different colour in the app for those rooms that are heating?
-
hrll
safacasfvasfvasfvcasgfvsdgbsdgbsdgbsdbsdbsdbsd
-
Verbetering usercase Slimme Aircobediening V3+
Ik gebruik de Slimme Aircobediening V3+ in combinatie met een Fujitsu Airco installatie. Deze Fujitsu heeft een aanzienlijke afwijking tussen de waargenomen temperatuur en de werkelijke temperatuur waarbij de Fujitsu een tot wel 5 graden hogere temperatuur aangeeft dan de door Tado gemeten temperatuur. Doordat de Slimme…
-
App display bug
I have two radiators in lounge that have linked tado smart valves. Recently, I found that one of the radiators was not getting warm. Investigation showed that the return spring on the valve pin had failed and the valve was stuck down. Because I couldn't get around to depressurising the system to swop out the valve, I…
-
Stop linking the password reset back to the App
If I need to change password, or have forgotten my password, the password e mail automatically links back to the app. The app then does not allow for a password reset. So you can only ask for a reset, get the link, go back to the app. The result is that you go around in circles and can’t log in or reset your password! The…
-
Don’t update schedule state after Heating Boost
Currently if the schedule is disabled after pressing heating boost, the schedule is then turned back on. I propose that the schedule should remain off after the boost button is pressed if it was off to begin with or remain on if it was on to begin with. As it stands it’s very difficult for me to just turn on the heating…
-
Away suggestion silence if not heating
Our schedule is set to 12° during the day. The house is typically cooling slowly from 19°, and rarely gets below 17°. Why does Tado feel the need to warn me that we're out and suggest setting Away Mode? Each month it then tries to tell me that if only we paid for the upgrade, it could have automatically set Away Mode and…