-
Return to schedule in Alexa
Through Alexa routines I can use my Hue remote to turn up the heating in the room when I turn the light on which is great. But the only option is to turn the heating off or to a set temperature when I turn the light off. Would be useful if one of the options was return to schedule.
-
POE ethernet
Make a power connection for the "Internet Bridge"using the POE option of a ethernet-switch. It will bee much easy to connnect the "Internet Bridge", just one wire. Best regard Peer Herbsleb
-
Compatibilité ELM Leblanc egalis ballon icondens
Bonjour, Le Tado v3 n'est pas compatible avec les nouvelles chaudieres Leblanc. Le sera t il? Merci
-
Geofencing able to adjust individual rooms
Would be a great feature if geofencing could turn on/off an individual’s room if they are not home instead of everyone having to be out of the house
-
Standing charge for energy IQ
It is well know factor within UK for all the providers to charge daily charge (standing charge). Could you please include this option within Energy IQ to be able to set and see the graph with or without (with slider ON/OFF)to represent monthly charges. This will vastly improve accuracy or shown readings in correlation to…
-
Improve Scheduling Functionality
I think it would be amazing to see the following added to the Tado platform\app to improve functionality and usability. Multiple schedules - This improvement is a must, there needs to be an ability to have multiple schedules per room in place to allow users to manage heating in their homes for different times of the year…
-
Much better support for making a regular water-based underfloor heating system to smart
Hey! It is really good about tado, that you can make your regular radiator into a smart radiator with a device without having to change the system or even call a repairman, but I feel to make a regular water-based underfloor heating system smart by tado is much more complicated. I think I have a typical setup: The easiest…
-
Opentherm : Visualisation of all of the command sent and received by TADO
In TADO pro APP it would be great to see what actually TADO is sending to the Boiler and also the data that TADO is receiving ans needs. I would help greatly to analyse the flow of data back and forth. I am sure that those data are available and used by TADO for Service. There should be also a log file somewhere but I…
-
"away" setpoint range
Use tado to run Samsung heater pump. Wish I could set away setpoint as low as 8C. 8C is the Samsung remote control lowest setting. As of now I make a time program, which in intervals 24/7 switch on and off the heater to average the temperature and keep room frost free.
-
Range extender would be a very good idea or even two bridges connected to one account
I'm having issues with some of my stats going offline. over the past few days they are intermittently going offline even the ones in strong range. so not sure why this happening. they seem to be going offline one after another. you get one go off then it comes back on and different one go's off. when that comes back online…
-
Fix bug where manual timer for heating changes does not work
Expected behaviour: GIVEN a room has a timer set for ‘Manual control on Tado device’ under settings/rooms and devices AND the room is currently running its standard schedule (ie there is not a manual adjustment currently running) WHEN the user makes a manual adjustment to the temperature for that room THEN the manual…
-
App translation in Romanian
Hi Tado community, Any idea if a translation of the app would be soon available in Romanian as well? I am willing to support this effort in my spare time, maybe there are other community members that would like to contribute as well. Best, Andrei
-
Flexible Schedules
I think it would be cool to have a way to make different schedules for your house. For example a geust schedule where your geust bedroom and your dining room turn to different heating schedules, whereas perhaps normally your geust bedroom would be off or run on a lower heat I also think there should be a geofencing control…
-
Extension LED status on the app.
Would it be possible to display the extension kit LEDs status on the app.
-
Energy efficiency idea: Heating schedule coalescence
My house has seven rooms, each with its own schedule. I can copy and paste schedules between rooms, but I tend not to do that because I want to tailor the timings based upon actual usage. Also, I created the scheduled years ago, before the copy and paste feature was added to the app. I know some rooms have similar times…
-
Landscape mode
I am using my Mobil in the Car and I using the Mobil as a navigation (Android) and if I won't to se the temperature on my Tado Ind my home it is problematic, now Landscape mode ? I can't se the status in My home ! Almost every other apps is using the landscape mode. Best regards Bo Cramer
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Relaiscontact thermostaat schakelt onverwacht.
Probleem: Na plaatsing van een nieuwe Tado slimme thermostaat in de woonkamer duiken er problemen op dat de thermostaat de verwarming onverwacht inschakelt, dus op ogenblikken die niet in het slimme schema staan. Hij luistert ook niet naar de handbediening: vb. ruimtetemperatuur is 19°, relaiscontact van thermostaat is…
-
1,0 degree isotherms in graphs (now 1,5 degree)
Currently in the temperature graphs the horizontal isotherm lines are spaced 1,5 degree Celsius apart. This makes the reading very uneasy and awkward for the untrained observer. Can you please set them 1,0 degree apart?
-
Set manual on off temperature
I would like to be able to set a manual on/off temp. For example the room will heat to 21 and turn off. It then won't call for heat until the room reaches 18 at which point it would bring the room back up to 21 before turning off.
-
Boiler external weather sensor + tado
It would be nice for tado to use the boiler external weather sensor if installed while running on opentherm/bus for more accurate heating. Why? Well, weather stations are not all over the place and not so accurate in some zones, so it would help people in remote locations.
-
Hot Water temperature control
See this thread https://community.tado.com/en-gb/discussion/comment/54598#Comment_54598
-
Commande tadoo pour les poêles à pellets
je voulais juste savoir si vous pouviez mettre vos ingénieurs sur le coup et inventer un tadoo compatible poêle à pellets ça devient important pour nous personne ne commercialise ce système et pour ma part la marque Mcz ne souhaite pas faire évoluer ces anciens poêles en wifi. la télécommande est infrarouge elle prend la…
-
Calibrate offset of TRVs automatically based on wireless thermostat
Hi Please consider using wireless thermostat as an auto calibration offset tool within a room. Now have TRVs on all radiators. Put wireless thermostat into the area of the room I'd like to adjust the temperature to. Have TRVs in room check their offset against that wireless thermostat and adjust automatically. Have this as…
-
Climate report in Tado Web app
Hi, To me, the availability of the climate report in the web app - app.tado.com - would be a big improvement. Preferably combined with option to export (CSV) and also to compare the reports between different (or similar rooms (between bedrooms fi). This is feature high on my feature list. Greetings Christophe
-
Energy IQ - room heater size
Allow us to enter the size of radiators or UFH systems in rooms to get a better estimate of which rooms actually use the most heat. At the moment I assume the estimates are useless as my 300W towel rail is the highest usage in my home despite having multiple 2kw radiators elsewhere.
-
App Notification
Add notification on the home tile page to show that tado are performing maintenance or are having issues. Twice this month I can see the internet bridge cannot connect (network tools) and the boiler stays on.
-
Offset Identifier on Tado Thermostat Tiles
I use an offset for one of my thermostats to avoid the frost protection kicking in when I don't want it to (given that there is no way of setting a minimum temperature manually). Could there be a symbol or other identifier on the Home Screen tiles for when thermostat controllers have had an offset applied? Or even the…
-
Configurable schedule
Currently we can have 1 schedule for all days of the week, 3 schedules: weekdays & Saturday & Sunday or 7 schedules: every day separate. Can we get a way to define this in a custom way? I work from home 4 days a week, so to be able to schedule those days separate from all other days would be so much more convenient! It…
-
Different houses
I would appreciate to be able to manage my 2 houses from the same app and account. Currently this is missing