-
Small change to "Boost Heat all Rooms."
During the summer I use the "Boost Heat all Rooms" quick action to activate the heating once a week to keep the pipes clear and exercise the thermostatic valves. It works fine but at the end of the boost period it returns the system to the schedule rather than the state it was in before boost was pressed which, in this…
-
Spread temperature range on Tado smart ac control
hi, I have a problem with Smart AC controls funcion. I have an vacation apartment that is heated by AC, and in winter time we set +8C on AC and leave it for whole season, with Tado smart AC I can heat min. to 16C that is too much for me, all I need is frost protection, or to set lowest heating temperatre. Could you spread…
-
Smart AC Thermostat Battery Pack & Homekit Upgrade
Hello folks! I'm a tado enthusiast and I built quite an ecosystem at home: always felt that tado products have an extra kick both in design and experience customization which made me choose them above the competitors. I was a bit turned off by the Smart AC Thermostat USB cable hanging along the wall and plugged in the…
-
Build own iOS app or use iOS shortcuts - use API to allow multi home support
Hi, Has anyone played with the idea of either building their own iOS app or using iOS shortcuts / automation to make API calls? Specifically making an API call to set home or away status based on geolocation. I don’t need any more multi home support than geolocation, everything else is OK in the web interface (if I have…
-
Airco fan speed control with Google Assistant
It appears that setting fan speeds (low, medium, high, auto) for our Tado controlled airco devices with Google Assistant is currently not supported. We can set the temperature, and set cooling or heating with Google Assistant, but not the fan speed. Fan speed is always set to “medium” if you turn the Airco on with Google…
-
Vane angle positioning on tado Smart AC
Hello! With the latest firmware (100.0) of tado Smart AC Control it is still not possible to control an angle of vanes on an AC unit :( This feature would be quite welcome and I hope for tado's support in this regard. Thanks and regards, Zarko.
-
Select and copy serial number to clipboard
When contacting technical support they request the serial number of the device. You have to manually type it in when you should be able to long press and copy to clipboard
-
Energy IQ Tariff rounding bug
The gas price is 5.65p (UK pence) per kWh and previously it was 3.44p per kWh. However Tado App asks to enter this as £ so I enter 0.0565 and 0.0344. However Tado rounds this to 0.06 and 0.03 which is quite a large rounding error, resulting in a bad estimation. Could you please update this to allow more digits. Thank you &…
-
EnergyIQ bad UI design for viewing history
Hi, Thanks for the latest EnergyIQ update: >> Energy IQ has been updated, and now you can view your historical heating consumption all the way back to when you first installed tado°. To check your consumption from a previous period, open the Energy IQ skill and select the desired month from the dropdown menu at the top of…
-
Summer/Winter Mode
The app should have a summer mode which, once activated, amends all schedules down by a predetermined amount, to counter ambient temperatures. For example, 22 degrees in winter feels comfortable, whereas 22 degrees in summer feels too hot. This is due to ambient temperatures, which affect heat retention. Now that temps…
-
Ventilation remote solution needed
Hi, could you please help me to find the right device to add to my existing tado° set (Wireless temp sensor+wireless receiver+internet bridge) which work perfectly to heat the house, but not to cool it down. I would need to control the existing manual ON/OFF ventilation switch as well, based on the inside temperature in…
-
Temperature monitor or probe for Hot water tank
Please can we add a remote temperature probe for a Hot water tank. Simular to a radiator thermostat. However it will tell the temperature of the Hot water Tank. This could also be used to integrate temperature control for the Hot water and weather to re-heat, turn on the hot water or turn off.
-
Store a basic schedule locally in case of crash / lost connection
My Tado system crashed when I went on holiday when the boiler was on. It stayed on max heating until I got home. Quick sums showed it had burned abut £50 in gas (which Tado refunded in the end) but surely it makes sense to store a limited schedule locally, at the boiler controller. What's potentially worse is if the system…
-
Smart AC control to activate AC based on room temperature
Currently the Smart AC control turns on the AC unit at the start of a time block, regardless of the temperature. In my opinion that's a major flaw, because most (all?) home AC units still run their fan even if the room temperature is below the setpoint, so it's a waste of energy and also annoying to have the fan blowing…
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…
-
Silence mode activation for Vaillant (GREE) airco
I have a Vaillant airco, which is acutely a GREE airco. I’m really happy with the Tado remote, but i can’t select silence mode. It is the mode I use the most. Please add this function to the Tado remote
-
Energy IQ area & Data Analysis improvements
Hi, After the last time suggestions about the review the previous data and Yes, I can see the delveoper quick changed now. The previous data with the m3 usage only rather there had the cost £ figure in the current montly. (current month, that could choice m3 leave or cost £$)..Hope that can be apply to the previous data as…
-
Always on display
Please please please make an option to show the current temperature stay always on. Even if it’s on dim - it would be so handy to have this information available at a glance
-
Add a turn off all heating control
Right now when you click turn off all rooms, it includes hot water as a room. For the summer months it would be great if you can just turn off all heating instead of including the hot water.
-
Air Comfort suggestions
Hello, We're supposed to make energy savings with Tadoº, but it's quite inappropriate to get a suggestion to turn the heating on when a room is just below 20ºC. The World Health Organisation recommends a room temperature of around 18°C in Winter, and The Energy Saving Trust advises setting the thermostat to around 18-21°C,…
-
Increased rooms
Is it possible to add more than 10 rooms?
-
Smart Radiator valves in anthracite
How about making the radiator valves in different colours such as anthracite to match designer radiators ?
-
Disable away mode notifications when heating is off
The away mode notifications work well for me, however they don’t make any sense when the heating is off. So the weather is warm, I’ve turned the heating off, but I still get an away mode notification every time I leave the house. Any reason these couldn’t be disabled automatically while the heating is off?
-
Switch unused rooms off
Dear Tado, Please can we have a function in the app to simply switch off the smart valve completely. For example, we have a guest room which needs to be off. If we have guests we can switch it on. Whilst I appreciate I can turn the temp down, it would be better to have it showing as a completely different colour in the…
-
Control4 Driver
I don’t know if this has been brought up but it’s 2022 and Tado either needs to make a Control4 driver and make the API easily available. My integrator shouldn’t have to search the internet to find the api.
-
Activity log viewer
Hi have read your summary of missing / development requests. Is there any movement on these. I am frustrated that there is no way of viewing the log activity for room temperature, boiler control, manual interference, who did what and when. There are spurious times when the heating or water comes on and I don’t know why. A…
-
Heating icon for rooms on the main view
It would be nice to add a heating icon (similar to what you would see when you tap on a room) to each room on the main view (where all rooms are listed) in mobile apps. When there are many rooms on the main screen, it is hard to say which ones are being heated. I have to compare the current temperature with the programmed…
-
Billing option for gas tanks and oil heating.
Add to the billing option the ability to put in the cost per KWh for the fuel bought.
-
Fuel bill entry
A lot of people who live in rural areas may not have piped gas to their home. Those of us who are either on LPG or Oil get irregular deliveries of fuel. It would be great to be able to simplify the energy bill entry as it could be anything from three to five months between deliveries rather than monthly, quarterly or bi…
-
[released in beta] Yearly Energy Data
Energy IQ is a good start and enables the user to see costs of current months heating cost compared to last months. Can you add a feature that allows user to look at last years complete monthly data and compare it with current year to date. Users can then see if changes to their system have made a difference to running…