-
Generate push notification by the app when Internet Bridge cannot be reached
When the Internet Bridge has an issue (either because it hangs or because my Internet connection is down), it would be great if I was notified by the app. That way I can resolve the issue as soon as possible. Currently I have to open the app to see that the app cannot connect to my system. Would be great if this was…
-
Make sure the heating schedule is available offline
When the Internet Bridge has an issue or the Internet connection is down, the Tado devices stop working. Recently my Internet Bridge hung during the night, which meant my heating system didn't start in the morning and the house remained cold. This can be solved by syncing the current schedule locally and keep using that…
-
Energy IQ split costs heating/hotwater
Is it possible to split the monthly costs in heating and hot water?
-
Multiple internet bridge's
Hello, I'm having trouble with keeping all my devices connected to the internet bridge. I was thinking why can't tado software team roll out an update so you can have 2 or more internet bridge's on the same network at different places in the house to expand your coverage.
-
Greenstar 8000 EMS compatibility
Please develop EMS compatibility with Worcester Bosch Greenstar 8000 range to permit proper modulation control.
-
Definition og heating Interval per radiatorvalve
When heating, a radiator will continue heating, even if the radiator is very hot in the bottom. If it is possible to define a number of minutes per radiatior after which the heating will pause for a number of minutes. This will save the heating cost for those of us who pay per m3, and also for us who pay per KW, where…
-
Immersion Heater Switching
Can Tado please modify the Hot Water Controller. This debacle (on Tados recommendation) has lost me £165. I sent Tado all tech data and photos for them to study, and on their recommendation I purchased the wireless thermostat starter kit with hot water controller and the wired thermostat from Amazon because it was on…
-
Make use of OpenTherm data
If the tado is connected to the boiler via OpenTherm, could we make use of the data, ie in the graphs where it shows the boiler activity (the 3 vert heat bars, and colour code), could we also show the boiler temp that was set at the time?
-
Energy IQ enhancement
[tado°] Your feature request Good morning Would it be possible to intergrate electricity consumption into the app preferably either by WiFi / Smart meter interaction, or manual read insertions so we can make good use of available information.
-
Option to submit meter readings using ft3
I have quite an old gas meter and the display works in ft3. Is there a way, or can there be a way to use ft3 for readings in the Tado app?
-
Reducing the duration of heating scheduled time slots
Hello given the current energy crisis, I wanted to find out if you would consider changing the standard heating schedule time slots from a minimum of 15 minutes down to 10 minutes. It does not make sense that I am able to boast my heating for 5 minute intervals but the smallest interval I can set my heating schedule to is…
-
Away mode schedules for hot water
Away mode for hot water is simply on or off. Is it possible to have on or off or a schedule? As is case with heating, when I go away in winter months, I would want some heat in the water system as well as within the home to ensure against freezing pipes and condensation build up in rooms and mould.
-
Energy IQ
Could you set it up So we can put the oil Price per litre. So we could use this function. It seems you are only thinking about Gas boilers and not oil. I’m sure there are customers who have oil and would like the same Benifits.We have paid the same price for out Tado products after all
-
Tado will be better this way!
A. Keep it as it is. B. Give us local control if internet down( with some limitation on the app,course!). C. Make it more reliable and trustworthy (point B included). D. Better inside coverage of the bridge and strenght signal on the app for all zones covered. Maibe our votes will be read and seen by the Tado customer…
-
Tado Temperature Sensor to log temperatures below 0 degrees C
Hello, I'm using the Taco Temperature Sensor in my garage to purely measure the temperature. I found that there are hardly any temperature sensors that are connected to the cloud and can be read without being connected to the local wifi network. In my garage, it sometimes gets below 0 degrees C. The Tado app doesn't…
-
Tado...in the clouds!
Tado is unreliable,i use it for a while but disappointed,just an app for a lot of money,sistem has many many flows cause is cloud based,that is the main issue. Lucky me i have my old thermostat and i am using weather compensation with it and my trouble with Tado has ended,no connection lost,no lost of heat and less gas and…
-
Two ideas
1). For Combi users, develop a sensor that monitors system pressure and always when low. 2). For oil users, develop a decent tank monitoring system. I'd buy both. Tom.
-
Can we get smaller buttons?
I don't see the point in having to scroll down to see all the rooms, and then all the environmental buttons. It would be great if there could be an option to resize the buttons (e.g. specify how many in each column). Likewise, the quick buttons at the top require horizontal scrolling when again they would be in columns.
-
Change Temperatures for all Smart Rad Valves
I'd like the functionality to be able to change the temperature of all the Smart Rad values at the same time, so perhaps reducing the temperature setting all the valves at the same time
-
Tado...low heat,pump running for hours.
Hello! I have disconnected my tado V3+ cause to be honest i did not liked the way it worked,and to be more clear and on the matter of facts,i can tell you that after the instalation( bridge+ thermostat+ wireless receiver) and let the Tado to do his work i have discovered it is very annoying and frustrating to see the Tado…
-
Support scenes for HomeKit and expose Quick Actions as shortcuts
Dear tado team, Defining schedules in the tado app is great, however there is little integration with Homekit, which makes building of one's smart home setup hard. It would be fantastic if you'd expose Quick Actions (Turn off the heating, Resume schedule in all rooms, Resume schedule per room) available as scenes for…
-
Confirm boiler shutdown before closing last rad valve
Hi, If the Tado app made sure it turned the boiler off before it closed the last radiator valve then this would allow the whole heating system to have tado valves on each radiator. In our house we have a nursery radiator which comes on regularly through the day and night. Because some radiators don't have thermostats…
-
Show radiator and boiler relay status in app
Hi, I think it would be nice to see the valve position status in the app. Obviously if the set temp is above the actual temp then Tado wants to open the vale, but it would be nice to see the feedback so you have some confirmation that it has happened without needing to be near the valve. The same would be true of the…
-
Set "away" the separate room
The geofencing can switch off the heating of the entire house. But, the possibility of the setting one room is missing. For example, the children are out for one week. Why fully heat their room?
-
Introducing: forum members promoted to moderator
You might or might not have noticed this already, but I've recently promoted two experienced forum members to moderator status. More to come. I'm not sure if they want to be named, so I'm leaving that open for now. Moderator rights Moderators can merge, split and move threads, edit comments and a few other rights normal…
-
Create an option for the Radiator Knob to NOT trigger the boiler
For houses with a floor heating system the setup how TADO Thermostat works with the radiator buttons not ideal. If one of the radiator buttons requires the radiator to heat up, this will now trigger the boiler and will then trigger the floor heating as well consuming a lot of unwanted heat. Suggestion is to create an…
-
Master Temperature Control
I want my whole house to be 18 degrees. I don't want to have to go onto each room
-
Water damage / Fire detection
Not directly related to heating management, but will be a great asset: using the sensors available (temperature/humidy) to notify user of probable inprogress water damage (very high humidty) or fire (very high temperature). Would I had received such a notification, this would have greatly reduced the extend of damage that…
-
Introduce a learning ability to Early Start for radiators
Using the data a thermostat picks up about how your house heats and cools, and the time taken to reach/maintain a temperature introduce custom smart start/finish to scheduled events . At least add a 'radiator' version of Early Start.
-
add LPG to Fuel type
would i be possible to add LPG to Heating Type with the calculations to work with graphed data to reflect price and KWH for unmetered connections