-
samenwerking thermostaat & slimme airco bediening
Ik ben op zoek naar een mogelijkheid om mijn airco units slim te maken maar ook om deze samen te laten werken met de thermostaat. Bijvoorbeeld, ik wil 's morgens het huis opwarmen (o.a. vloerverwarming) met de CV ketel waarna ik het huis op temperatuur wil houden met airco units. Ik ga nu met home assistant beide…
-
Activity indication on Home page
It would be great to have an indication of c/h current activity in your home. This can be as simple as the 3 wave bars, as seen when you go to each room individually, all ‘“or’ed” together displayed at the top of the home page. This allows you to know at a glance what is currently happening with the system. E.g A room is…
-
Manual/ schedule indicator to show on dashboard tile
I have Tado in my house and I love the flexibility of the system, especially as a user can turn up or down a room as they need. By often the manual intervention means that stat is the set to remain like that until it is returned to automatic either by the stat or by the app. Can we have an indicator in the app that shows…
-
Verwarmingsstatus in tegels ruimten
Ik zou het handig vinden als op het thuis scherm in de tegels rechtsboven de 0/1/2/3 verticale golfjes zouden staan. Dan zou het in één oogopslag duidelijk zijn te zien welke ruimte een actieve warmtevraag heeft en of dat overeenkomt met hetgeen jezelf verwachtte.
-
Hot water boost
Can we have a hot water boost facility that is timed. Having to let the boiler run until its next schedule is un necessary and wasteful should you forget to stop it.
-
Foutrapportage - Foutmeldingen van je ketel weergeven in de app (bv. te weinig druk)
Bij mijn huidige thermostaat van Remeha krijg ik foutmeldingen zoals bijvoorbeeld dat er te weinig druk is, of kan ik zien wanneer de brander actief is. Wanneer ik overschakel naar Tado zou ik geen enkele van dergelijke meldingen meer krijgen. Zie ook:…
-
Gestion de plusieurs maison depuis le même compte
Bonjour, J'utilise le système Tado pour gérer 2 logements, et j'ai été surpris lors de la création de la 2ème installation de ne trouver aucune option pour ajouter cette dernière. Après quelques recherches j'ai trouvé d'autres utilisateurs confronté au même problème, et la seule solution semble être de créer un 2ème compte…
-
Hot water boost
Hi - just installed tado radiator thermostats and a hot water and thermostat- so now fully invested in the tado system. The only thing we are really obviously missing is a 30 min, 60 min , 90 min hot water boost which then switches back to programme afterwards. Would really love to see this otherwise likely will switch…
-
Colour code on air to air pump modes
The modes on the smart ac3, is colored blue for all modes except for heating, a small thing, but in fan mode it is confusing, as it is not cooling but just transfering air, make it light green so it is different from cold
-
Set max heating water temperature from the app.
This is essential for all hybrid heat pump installations.
-
chaudière en sécurité
bonjour. ma chaudière électrique ortli cer s'est mise en sécurité car il n'y avait plus assez de pression dans le circuit d'eau ( circuit avec radiateur). le thermostat v3+ ne m'a jamais prévenu que la chaudière ne chauffait plus ni même que la chaudière se trouvait en sécurité. Serait-il possible que l'appli ou le…
-
Be able to name devices rather than refer to them just by number
I would like to be able to name my Smart TRVs rather than them being numbers only. It would then be easier to know which one needs new batteries when the email comes through if there are more than 1 device in a room or area.
-
Geen functie/symbool gebruik warm kraanwater op thermostaat
Volgens bijgaand artikel van support heeft de slimme thermostaat een symbool voor warm water productie. https://support.tado.com/nl/articles/3387237-wat-betekenen-de-symbolen-op-het-display-van-de-slimme-thermostaat-of-de-draadloze-temperatuursensor Op mijn (recent geplaatste) thermostaat krijg ik dit echter niet op mijn…
-
More than one tariff rate in energy IQ
Would it be so difficult to have more than one tariff rate? I have 2 tariff rates. One rate for the first 2kwh and another for the rest over 2kwh. So the costs costs shown in energy iq are not accurate at all.
-
User configuration of "Early Start"
It would be good, if WE could set how long it takes for OUR ROOMS to heat by 1˚c (each room should have it own setting), then early start may actually be useful. Time to heat by 1˚c: 0hrs 30mins So if the room has a target temperature of 19˚c, and the current temperature is 16˚c, early start would kick in 1 hr 30 mins…
-
Restore single tap for manually override
Hi, In a recent app release (maybe 7.0.0) the ability to single tap to set a manual schedule was removed. Please bring it back! Before this was removed, it was possible to tap on the HW switch or room slider which would invoke a manual schedule that could then be edited and adjusted. Since the change, it's now necessary…
-
NEW DEVICE - Multiple Heating Zone Controller Extension Kit
Currently where you have a “System Boiler” that heats your hot water in a cylinder there is only one device available that can control your hot water separate to one heating zone. The extension kit. Larger homes are now being fitted with multiple heating zone control, particularly where you may have a split between…
-
Lock/Limit Selection of Temperature on Thermostat via App
I currently have a Tado installed in an air BnB and recently I had a guest which turned the temperature upto maximum for a couple of days. It would be a good feature to be able to allow us to limit what temperature the Tado could be set to within the App. For example, limiting it to 22C or even locking it completely.
-
Away Mode by Mobile Device
So my wife and I work from home, yet on some days (random days) either of us may go into the office. We work in 2 separate rooms at home. Because I do not know the days either of us will be in the office I need i remember to turn the programmed heating off in the room in which no one will be working that day, and…
-
Dry clothes function
I have a dehumidifier and together with the room humid graph I known when I need to turn heater on, open windows (when humid outside in lower than inside, it could be found in local forecast) . I see when cloths are drying by the humid going up, but after 85 it doesn't dry than I have options, open windows, turn on the…
-
Add silent mode to app and API
Many aircons have a silent mode for at night. I use his mode very often and it can only be enabled with the original remote. It would be great if the silent mode is added to the app and to the API so domotica developers can use it too.
-
Add decimal to the usage amount
The city heating is measuring in giga joules. My usage last month was 0.356 GJ and a unit costs €45.26. Currently it is not possible add meter readings because it will be too inaccurate. So please add the possibility to have 4 digits behind a decimal.
-
GeoFencing early start
SUGGESTION: Provide for GeoFencing to be programmed or set in advance. For example - I'm going out in 2 hours time. I'd like GeoFencing to start in say 1 hour. And could such programming be regular (every Tue/Fri, weekdays, etc) as well as occasional
-
Allow the swapping of Smart TRV data from room to another room
What i mean is that if you need to swap a TRV from one room to another (very rare occurence) like I have had to do (moving noiser TRV from bedrooms to other areas) then i would like the option to keep the statastic from its original placement onto the new TRV. Looking at my Energy IQ today shows one room used 3m3 of gas…
-
Hot water schedule
is it possible to create a separate schedule for the hot water when in away mode? it is really annoying not being able to adjust the hot water schedule more accurately and automatically when we are not at home.
-
Enable Temperature Sensor & Radiator Thermostat to display temperature in Fahrenheit
I live in the USA and own 4 temperature sensors and 5 radiator thermostats. The app shows the temperature settings and readouts in Fahrenheit, but the temperature sensors and the radiator thermostats do not, which makes it extremely not user-friendly for imperial countries. Furthermore, you cannot choose the choice of…
-
Tado A/C controller wall mount missing by design?
Hi, I have three A/C controllers and each one was only supplied with a temporary sticky pad to fix to the wall? Is this right? Am I missing a part? One keeps falling off the wall and have tried other sticky pads but none seem to work, seems a huge oversight to create something that should be mounted to the wall with only a…
-
Extra functie: 15 kamers ipv 10
Graag meer dan de 10 kamers die nu aangeboden worden. Dat is echt te weinig
-
Energy IQ multi-rate unit price for Electric Boilers and real-time energy utilisation
I have a Tado connected to an electric boiler used to heat a wet system (radiators). That is pretty common in UK city centre apartments. I would like to see Energy IQ abke to differenciate energy prices (multi rate such as Economy 7 or 10) and read energy consumpton through API integration with Smart Meters or Clamp-on…
-
Single place to review when a boiler has been called for heat
You should be able to see within an area of the app, every time the boiler has been called for heat across all your devices. This would then show you how often the boiler is on, and therefore allow you to potentially reduce your energy consumption, and tweak the settings for your house to heat it efficiently and…