-
Better collaboration with Air Source heating system
I have an air source heating system in my home and the projected forecast costs are not reflected well at all with the app. I input my energy usage each month and never get anywhere close accurate costing suggestions. The data input screens are clearly for gas/oil systems, and not designed for Air Source systems. Our Tado°…
-
Heat release valves
If there would be an option on valves to setup not to close the circuit when reaching the heating point, just send the end signal to the themrostat, then there should be circuits where the remaining heat should release and this extra heat could be useful in bathrooms or other higher heet needed rooms.
-
Temporary extend current schedule
Time to time I get into the situation when I know I will work a bit longer in my work room. Currently I can do two things to extend the heating, 1) wait until the switch and then set to the same temperature as before with a (optional) time limit 2) set the temperature +/-0.5C before the schedule switching off with…
-
Pouvoir changer la température hors gel
Bonjour, J'aimerai pouvoir changer la température hors gel par défaut pour pouvoir éteindre mon installation simplement quand je quitte ma maison de campagne pour quelques jours plutôt que de devoir utiliser le sélecteur vertical de température qui m'oblige à changer également jusqu'à quand ce changement de température…
-
Mehrere zuhause pro Account
Bitte bitte bitte, ich warte seit Jahren darauf, dass ich endlich mehrere Tados in einem Account nutzen kann. Mir
-
Use one thermostat to override all system
Hi, It would be good to set one ST or TRV or whatever that when overriding the programmed schedule through its interface (not from the app), it will override the whole system to the specified temperature.
-
Intervals dans progamming
HI, I think we should be able to get interval from monday to thursday for we not need to program every day individually. Because weekend begins when we finísh our worktime and we change our habits
-
Meer dan 10 ruimtes aansluiten op de zoneregelaar
Ons huis heeft 14 ruimtes, 20 slimme radiatorknoppen en één slimme thermostaat. We willen in alle 14 ruimtes de temperatuur individueel kunnen instellen. Kan Tado de zoneregelaar zo aanpassen dat we, zeg, 15 ruimtes kunnen besturen in plaats van slechts 10? Ik vermoed dat het ergens een instelling is. Die toch moeten…
-
2 function Programs
Hello Regarding the application, I would come up with a suggestion that could come to the aid of tado thermostat users who use control panels for actuators, for the boiler but also for the mixing groups. I propose to introduce two settings in the application regarding the use of thermostats: 1. for radiators - this should…
-
Add dates and times when not home
It’d be great to have an option to add future dates and times when you know you’ll be leaving home in the morning, so that the system doesn’t start heating full on. Since that’s not the same everyday, it’s hard to get this into a standard schedule.
-
EnergyIQ: Reminder Notification Preferences
Hi, Hopefully not the biggest amount of work for this one: It would be nice to be able to define “when” you want to get notified from Tado to submit an energy reading. For weekly notifications it could be specifying a day of week, for monthly a day of month, for quarterly or yearly selecting an initial date that…
-
GJ unit in Energy IQ
For district / city heating the bill and meter readings are in GJ. It is very annoying to have to manually convert the units. Should be an easy fix: 1GJ is 277,8 kWh or 31,6 - 32,68 m3 gas.
-
Reduce water hammer sound by slowly closing the radiator valve
Sometimes Tado closes the radiator valves very quickly, which makes a loud bang due to water hammer. This can be bad for the equipment and it scares my kids. If the radiator valve would be closed more slowly, this would significantly reduce the amount of sound produced.
-
Improve calibration by requesting heat
When no heat is requested, the pressure in the system can be so low, that the radiator valve pin does not spring out fully. This can result in an E4 error, or invalid calibration. This can be manually resolved by enabling boost heating before mounting the smart radiator thermostats. However, I suggest that the Tado…
-
Manual Home Placement for Geofence
My GPS is behaving a little bit funky, and the Tado App doesn't set my Home correctly in the Setup Procedure. Thats why I would like there to be an option to manually set the home location.
-
Voice assistant missing command
A command to restore the schedule both by room or whole system is vital. I keep forgetting to manually restore at night and wake up to cold or too hot rooms. This command could be used as part of a 'goodnight' voice or timed routine.
-
Tado away/home iOS shortcut action
Hello, Tado is somewhat compatible with HomeKit using sensors/thermostats individually, but this is not great to create automations. It would be very useful to have a Tado shortcut action we can use in our scripts to set the current mode to be away or home, so we could create automations based on that. This would be…
-
Become truly environmentally friendly
Tado speaks about being environmentally friendly but my radiator thermostat broke. The resolution is to share a receipt and they ship me a new one (across multiple countries) and then I return mine (again across a long distance) I was told Tado does not have a repair department which begs the question of why it cannot be…
-
Small bug in heating activity graph
There is currently a bug in the activity graph after a temperature target is changed via Homekit (in this case specifically Siri). The activity graph fails to show the correct categorisation after the system reverts to the current schedule (its set to revert any manual changes), or an away state. The following screenshots…
-
A reduce heating button
Much like the boost heating option, it would be nice for an option to reduce the heating for a set amount of time. Sometimes I find myself doing housework and then the house gets too hot. I only have the option to turn the heating off and then remember to turn it back on again. With the reduce function I think it could be…
-
Ability to use AC thermostat as a sensor to radiator valves
I have an AC thermostat and a radiator with tadoº valve in the same room. Cant' understand why can't we use the AC thermostat as a sensor for the heating radiator. Should not have to buy an extra sensor for the room temperature. The AC thermostat already does that.
-
Geoloactie werkt niet als je langere tijd dichtbij van huis bent.
Ik ga van huis, uit logeren. Maar niet verweg. Ik wil tot een datum/tijd dat het HELE huis op een bepaalde lage temp staat. Want, het probleem is dat ook als geolocatie op zeg 5 km zet en je bent 15 km ver weg. Dan denkt Tado “die is niet ver weg, en dus zorg ik dat het huis niet tot de minimale temp afkoelt.” Dus dan moet…
-
display, max valve opening, subscription
Thanks to tado, my 25yr old house is keeping the target temperature for the first time and the overall heating cost are down. I love it! A few suggestions: 1) The valve opening (%) should be visible at the home screen (right next to room name and room temperature). Important to instantly see the level of heating per room…
-
Setting for degree of valve opening +/- smart opening relation to number of active zones
When valves open a tiny amount in a single zone they are noisy I would like to be able to set a minimum opening value. This would largley solve the issue but i'll go into it in more detail as I have a more elegant solution as well. I have tado valves on every radiator and if only a few zones are calling for heat then the…
-
Feature request: consider central heating schedules
Hi there, I live in an apartment block with a central heating boiler. It does not run 24/7. There is a schedule that can vary every year or on special circumstances. I believe this is a very common situation in Spain, maybe not so much in other countries. So I cannot have the heating on at any time I choose, but only…
-
A Pause Button… with Adjustable Duration
I would like to suggest a Pause button… Similar to the Boost button but with the opposite effect. Or add a time restriction to the Off button. With the weather so variable there are times when the heating just does not need to come on if one of the rooms drops 0.2 degrees below the target temperature. With temperature…
-
Set temperature for selected rooms shortcut
It would be useful if I can select the rooms fast where I would like to set a temperature for the next hour other than doing it individually. Thank you,
-
Active / Inactive rooms fast switch
I wold like to include a fast button for each room within the main view to mark that room as 'active' or 'inactive'. That way you can switch on/off the room you are currently using with a click. This would be nice.
-
Time block call for heat option
In the room time blocks, provide the ability to choose at different times whether thermostat calls for heat, or operates in passive mode
-
Smart AC Control V3+ / Setup Quiet Mode
Dear Support, It would be a great plus for the product tado smart ac control v3+ to support quiet mode. The controller already supports fan control and adding this feature will provide the benefit of completely giving away the hard manual controller of an older air condition. Maybe a generic mode could be added for the…