-
Become truly environmentally friendly
Tado speaks about being environmentally friendly but my radiator thermostat broke. The resolution is to share a receipt and they ship me a new one (across multiple countries) and then I return mine (again across a long distance) I was told Tado does not have a repair department which begs the question of why it cannot be…
-
Small bug in heating activity graph
There is currently a bug in the activity graph after a temperature target is changed via Homekit (in this case specifically Siri). The activity graph fails to show the correct categorisation after the system reverts to the current schedule (its set to revert any manual changes), or an away state. The following screenshots…
-
A reduce heating button
Much like the boost heating option, it would be nice for an option to reduce the heating for a set amount of time. Sometimes I find myself doing housework and then the house gets too hot. I only have the option to turn the heating off and then remember to turn it back on again. With the reduce function I think it could be…
-
Ability to use AC thermostat as a sensor to radiator valves
I have an AC thermostat and a radiator with tadoº valve in the same room. Cant' understand why can't we use the AC thermostat as a sensor for the heating radiator. Should not have to buy an extra sensor for the room temperature. The AC thermostat already does that.
-
Geoloactie werkt niet als je langere tijd dichtbij van huis bent.
Ik ga van huis, uit logeren. Maar niet verweg. Ik wil tot een datum/tijd dat het HELE huis op een bepaalde lage temp staat. Want, het probleem is dat ook als geolocatie op zeg 5 km zet en je bent 15 km ver weg. Dan denkt Tado “die is niet ver weg, en dus zorg ik dat het huis niet tot de minimale temp afkoelt.” Dus dan moet…
-
display, max valve opening, subscription
Thanks to tado, my 25yr old house is keeping the target temperature for the first time and the overall heating cost are down. I love it! A few suggestions: 1) The valve opening (%) should be visible at the home screen (right next to room name and room temperature). Important to instantly see the level of heating per room…
-
Feature request: consider central heating schedules
Hi there, I live in an apartment block with a central heating boiler. It does not run 24/7. There is a schedule that can vary every year or on special circumstances. I believe this is a very common situation in Spain, maybe not so much in other countries. So I cannot have the heating on at any time I choose, but only…
-
A Pause Button… with Adjustable Duration
I would like to suggest a Pause button… Similar to the Boost button but with the opposite effect. Or add a time restriction to the Off button. With the weather so variable there are times when the heating just does not need to come on if one of the rooms drops 0.2 degrees below the target temperature. With temperature…
-
Set temperature for selected rooms shortcut
It would be useful if I can select the rooms fast where I would like to set a temperature for the next hour other than doing it individually. Thank you,
-
Active / Inactive rooms fast switch
I wold like to include a fast button for each room within the main view to mark that room as 'active' or 'inactive'. That way you can switch on/off the room you are currently using with a click. This would be nice.
-
Time block call for heat option
In the room time blocks, provide the ability to choose at different times whether thermostat calls for heat, or operates in passive mode
-
Smart AC Control V3+ / Setup Quiet Mode
Dear Support, It would be a great plus for the product tado smart ac control v3+ to support quiet mode. The controller already supports fan control and adding this feature will provide the benefit of completely giving away the hard manual controller of an older air condition. Maybe a generic mode could be added for the…
-
modo frio para el termostato
Actualmente tengo un sistema de suelo radiante/refrigerante y necesitaría que los termostatos tuvieran una función de frío para poder usarlo tanto en invierno como en verano. Esto ya se lleva pidiendo durante años en el foro Tanto en ingles:…
-
Lowering frost protection or turn it off per device
I have a conservatory attached to the property and the temperature can go down as low as 3 or 4°. A useful feature to be able disable frost protection for this area or choose a lower level for frost protection, such as zero.
-
Some Suggestions
Tadoº Ecosystem Ability to use AC thermostat as a sensor to give temperature readings to radiator valves or the radiator thermostats (this is a big turn down). On the App (iOS) System: Ability to add shortcuts to iOS system, allowing to activate Boost Heating, Resume Schedule, Turn Off All, more easily. Geofencing: ability…
-
Timed override for geofencing
Would be good to have a way to override geofencing (to home or away, from auto) for a set period of time - like the timed manual override for TRVs. I manually override geofencing to ‘Home’ so that heating stays on for babysitters when I leave the house. But then I have to remember to turn back to “Auto” when I get home.…
-
Plieger
Goedemiddag, Wil toch even reageren op onderstaande mail van jullie. Misschien dat jullie er iets mee kunnen?! Ik heb een Herz adapter M30 inwendig naar M28 uitwendig gekocht waar een messing sukje bij zat wat over de pen van de kraan past. Ik heb enkel het messing stukje op de en gezet en….. tadaaa, de Tado knop werkt.…
-
Visitors pre-set
It's probably been suggested before but I'd love a preset for certain rooms so you can quickly switch between occupied and unoccupied. For example we have 2 X guest bedrooms. When visitors come it would be really helpful to have a preset to quickly switch the heating schedule on just for their rooms. When unoccupied we…
-
Heating Manual Adjustment Notification
We have multiple people in the house and it would be handy to receive a notification when the heating is manually adjusted from the schedule.
-
Raam open
Ik wil zelf kunnen aangeven dat de raam open staat. Hij detecteert niet dat het open staat. Als ik zelf opgeef dan wil ik ook tijdsduur meegeven voor hoelang ik denk dat het raam nog openstaat
-
Schema - zomer / winter
Wanneer het winter wordt, wil ik overschakelen van een “zomer” schema naar “winter” schema ipv alles moeten aanpassen
-
Extend open window time
Is it possibile to extend or to modify the open window time? So when you are doing the spring cleaning or leaving the window open due fry smell (in the kitchen) leaving longer then 15 minutes? And having a smooth warm up after the windows are closes
-
Heat transfer profiles to choose from
My old Honeywell thermostat had 4 profiles I could choose from. Each profile represented a different type of heat transfer speed. For example, hot air heating is a quick heating method. Convector heating a slower one. Both have their cons and pros. What currently happens is that when you use the Tado thermostat for hot…
-
Add detailed status info to tado app for Wireless Receiver connection problems
I recently reported that the wireless link and error LEDs on my Wireless Receiver were often flashing together to indicate a lost connection. tado support said they have access to detailed connection status information with date / time of error events. This type of data would be very useful for us customers to help…
-
Show the water temp that goes into a radiator or warn if too low
So, I had an issue with our central heating. Two-story apartment, the lower floor was fine, the upper floor not so much. Out of three radiators upstairs, one was kinda happening, the rest cold. I noticed it was a bit chilly. I played around with the two cold ones, removed the thermostat, and eventually called the landlord…
-
WiFi 6 capability/upgrade
Hi with 3 floors to my house the wireless capability to speak to a single bridge may be causing issues for me. Is there a solution that provides far. Ore effective wifi6 capability or comparability with a wifi6mesh network? TIA
-
Settings after signal loss and auto-reconnect
Regarding the wireless receiver of the central heating, it is undesirable for it to remain on when there is no signal. I have returned several times to a home with tropical temperatures after the signal was lossed for unknown reason (so far) and the heater remains (last setting before disconnection). Can't this be set to…
-
Monitoraggio finestre aperte
In Tado non esiste un report relativo al monitoraggio delle finestre aperte durante la giornata. Propongo, se possibile e non troppo oneroso, di inserire questa nuova funzionalità che ci dica: - tutte le stanze in cui si è verificato il rilevamento con gli orari - quante volte in quella stanza si è verificato - le…
-
Show end time while editing the duration of a heating override in the tado (web)app
When temporarily overriding the heating schema (e.g. I temporarily want to heat up a specific room), I can choose for how much time I want this override. However, I typically want to directly see at what time this override will stop, not only how long it takes. So basically, when setting the duration of the override, it…
-
Alert
It would be good if there was a log file so that you could find out which window alerted "open window"