-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…
-
Turn off whole system for specific timed limit
Hi all, my suggestion is to be given to option to turn off the whole system for a time limit as you can with each individual thermostat. My family’s schedule isn’t the same day to day or week to week and changing the current schedules on a daily basis is time consuming. However when that last person leaves we do know when…
-
Multiple bridges per house/apartment
We live in a large house with thick concrete walls. It is difficult to cover the whole house with one bridge respectively to reach all Tado products with one central bridge. I have two bridges at home, but I can only register one in the app. It would be very helpful if I could register two (or more) bridges. This way I can…
-
Wireless receiver status in app
Can we show wireless Status in the tado app?
-
Can we have a Widget
Hi, I feel that you brilliant technology would benefit hugely from a Widget, enabling a screen on my smartphone to be live feeds from the zones of my home
-
Add installer menu on the app
I was not home today and someone from customer support did rebooted my system from R01 relay on/off to digital opentherm D01 and as a consequence i can see the temp inside my house is dropping (-3°C outside) ,heat request at max.{{{ waves but cause of the rebooted system the signal will not go to the boiler to fire cause…
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
Provide motor torque control
The automatic mechanism that controls how newtons of force that the valves need to register as closed is not always correct. Please provide a way to finetune thermostats.
-
SET to a VALUE (MIN or MAX)
Hi, One important feature is missing on the app. All the settings are related to the temperature measured by device. There is no selection for "FULL OPEN" or "FULL CLOSE" what sometimes we need to. I have Vaillant Boiler with Vaillant eRelax Room Termostat. While i'm using it together with tado on my all radiators, there…
-
"Nomatterwhat" shut down schedule
Hi there! I would suggest that in future versions of the app a ("No matter what") shutdown method could be scheduled. I mean it would be really helpful the possibility of scheduling a Shut-down whatever the previous situation was. No matter if I started the heating manually, it will shutdown at 23:00 because I scheduled…
-
Smart Radiator Thermometers
I previously purchased smart radiator thermostats for my Tado system however they were too noisy in the bedrooms and led to a few queries which I raised with Tado (however they have asked for these queries to be posted here). Hopefully there is a solution! Is there a way to set the bedroom smart radiator thermostats so…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.
-
TRV quiet mode via minor increments over time
An option to set a TRV, such a bedroom, into quite mode. This will slowly adjust the TRV in small increments when getting close to temp, or when needing to heat the rad. This will be extremely useful in bedrooms, as the sudden adjustment wakes the kids and wife every morning and night.
-
"Slave" functionality: open the trv valve but don't demand hot water
Hi. I have a towel rad in my bathroom. I like the idea that my towels are kept dry more than I like to control the temperature in my bathroom. It would be really useful if i could 'slave' my towel trv to the heating for a time block. By slave, what I mean is that the trv will remain open during the slave slot, meaning when…
-
Hot water cylinder temperature control
I have the hot water extension kit installed next to my hot water tank. probably as per most peoples set up. It would be nice to have a wireless piece of kit that replaces the hot water tank temperature gauge that either connects wirelessly to the hot water extension kit or is wired in...
-
Linked Hot water / Heating
I have a boiler with a hot water tank. I have both the Tado thermostat and hot water extension unit. It would be handy to have a setting to have the hot water sort of 'boost' when the heating was engaged... If the boiler is on and working then there is no reason why the hot water couldn't also be working.
-
Tado device automatic restart
Hello. Each electronic device needs a restart one in a while. My Tado device needs a restart once a week otherwise it will stop issuing commands. Everyone may have or will have the same problem. Hence, it would be good to implement a feature of automatic restart once or twice week (at night for example), so to avoid that…
-
Merged: support for multiple internet bridges
This discussion has been merged.
-
Add a lock mechanism to Smart Radiator Thermostat
Currently anyone can easily unmount Tado Smart Radiator Thermostats, accidentally or on purpose. This can damage the device. Users other than the owner/maintenance team should not be able to unmount the Smart Radiator Thermostat. Please add a lock mechanism to prevent easily unmounting the radiator thermostat.
-
Add arrows to Smart Radiator Thermostat to show where to turn
Tenants, particurarly in short term rentals, do not understand how to set the temperature on Tado Smart Radiator Thermostats. They often try to turn the wrong part of the device and end up with unmounting it. We got several broken radiator thermostats because our guests accidentally unmounted them and the devices fell…
-
Multi Zoning with Profile Creation
Recently bought Tado. However unlike my previous setup where my Radiators where controlled by 2 Thermostat. One Honeywell Dial which was wired controlled all off the Downstairs Radiators to separate heating the house. To save on Energy. The second one was a Drayton Wireless RF Unit that contolled and heated the Entire…
-
Add other devices that can use the hub and app
Of course you can think of lights and alike, but there would be many, many competitors. Adding a smart smoke and heat detector, would be beneficial. This is not a complicated device, the majority of the technology is already designed by tado and, well, a smoke detector ain't something complicated. Same hub could be used…
-
Inefficient radiators
Inefficient or wrongly sized radiators could be identified easier if the durations of use or daily call for heat durations are displayed for each radiator. Any radiator running longer than others (provided it's fairly substantial) would identify that the radiator is performing poorly. The system or app currently shows…
-
Don't limit UK devices!
I bought a tadoº wireless kit last week and have had an absolute nightmare trying to get it set up, not least because of the terrible customer support from tadoº, but also because it has been decided to cripple the functionality of the devices in the UK! After spending £200 on this tadoº kit, I was faced with a prospect of…
-
Link smart reader to tado
Hi Each month I manually add my meter readings to the tado app but in the uk there is a company loopup which I have given access to my smart reader so it generates automatic reports. Perhaps tado could do the same or link up with loopup. Thanks
-
add name to devices
hello, it would be nice to be able to de a name to the devices in a room. for the moment we find the number there would be more understandable if we could add a name
-
Set TRV to a "minimum" temperature
I would like to be able to set certain rooms so they have a "minimum" temperature rather than a target temperature - which will fire boiler when lower, but not switch off the TRV at the desired temperature - simply just use the temperature to know that room won't request heat unless it goes below that. That will mean if…
-
Constant Display
I would like the option to see a constant display on my wall control, thus not having to press a button to see the temperature. :)
-
More secure mounting system
Hello, I would like to have radiator mounting systems that are made of metal and not just plastic.
-
Maximum Temperature of the Boiler
I use tado on eBus interface. I want to set up myself the maxim temperature from the boiler. The condensing boilers are most efficient at 55-60%.