-
Decouple from cloud please
All we want is to avoid this: https://arstechnica.com/gadgets/2022/04/shameful-insteon-looks-dead-just-like-its-users-smart-homes/
-
Quick offset for summer & winter
Like most my thermostat is downstairs near my boiler, I often need to change my +/- offsets as my upstairs bedrooms are warmer in the spring / summer and cooler in the autumn/ winter, would be nice for an auto correction around those times of year for this.
-
Boost heating
I would like to be able to select the radiators from a list that I can boost in the morning instead of all radiators. I only need the ones downstairs to come on. ( I work shifts) Why is the logo on the top of the Thermostat facing the wall. :'(
-
Zones or Seasons
We have all our thermostats set to 21 and so when it gets warmer they obviously switch off. But for rooms like the bathroom which don’t need to be warmer than 21 it’s good to still have in to help dry towels etc. so it might be good to have a seasonal setting which just boosts regularly the system automatically at a…
-
Please allow me to access my data
Hi, I would like to create different analytic charts from the ones you supply. Please can you give me a way to access my data so that I can download it and create those. The key one I want is a chart to overlay all of the my rooms over each other and see which is the coldest - so I can figure out why and fix it. thanks,…
-
Zones for boost heating
It would be useful to be allowed to create internal zones in regards to boost button, for example only to heat bathrooms or only to boost rooms on ground floor. I live in 2 storey house with only 1 heating zone so when I press boost all house will be heated up, if we could only create up to 5 zones and add rooms of our…
-
Support scenes for HomeKit and expose Quick Actions as shortcuts
Dear tado team, Defining schedules in the tado app is great, however there is little integration with Homekit, which makes building of one's smart home setup hard. It would be fantastic if you'd expose Quick Actions (Turn off the heating, Resume schedule in all rooms, Resume schedule per room) available as scenes for…
-
Low battery heating demand should show on Care and Protect
When the low battery condition is triggered, the "care and protect" function says that the heating is not on, but it clearly is. The care and protect function should show, preferably, a message saying "heating demand due to freeze protection for room/valve change battery", or even just "heating 100% room".
-
Low Battery Heating Command should take outside temperature into consideration
In a low battery condition, the smart radiator valve seems to command heating, presumably to avoid potential freezing when unattended, however, this is unnecessary when outside temperatures are high (like today!) - the defect/feature request is to disable this behaviour when the outside temperature is above e.g. 5C I kind…
-
UI improvement
I think I’ve said this before but I wish there was a way to have a master temperature as opposed to setting each individual block.
-
TADO heating/hot water controller error messages - viewer
We have been using TADO for 2 years, and recently upgraded with a TADO Hot Water/Heating controller unit. The installation was done by professionals, and it all works... .. Except that the unit has the triangle warning light almost permanently on?! No amount of fault finding and re-checking can seem to diagnose why it is…
-
Be clearer about what caused the boiler to turn on
I have 6 smart TRVs and the Tado Thermostat. Most of the TRVs are configured without a zone controller so that they will accept heat if the heating is on, but not turn the heating on. However when they are below the desired temperature the graph shows that the heating was on in the same UI state as when they have a…
-
Wi-Fi Concern
Hello, If the wi-fi goes down in the property, does that mean you are not able to turn on the central heating in the property? If this is the case, I think this needs discussing by your community members, and needs this feature adding to your system. We have friends in rural areas where the wi-fi can be very intermittent,…
-
Activity lights on home page
I would like to see the H/W and C/H lights that are on the wireless programmer mirrored onto the home page of the Tado App. This would allow a quick view of the current status and not take up much space on the Home Screen. It could also be improved if the C/H was red dot for fully on and amber dot for a remote thermostat…
-
Don't limit UK devices!
I bought a tadoº wireless kit last week and have had an absolute nightmare trying to get it set up, not least because of the terrible customer support from tadoº, but also because it has been decided to cripple the functionality of the devices in the UK! After spending £200 on this tadoº kit, I was faced with a prospect of…
-
Stats in the web browser + Fix weather on off toggle button
Hi, Can we have the stats available via the web interface? Also on the stats in the Android App the Outside Weather toggle button is the wrong way round to the Heating on and Humidity button, if you toggle them on whey go grey yet grey on the weather button turns the weather off.
-
Can you not have a Forum for tech issues
The guys at the shop do seem a little under pressure. Keeping a website uncluttered is always good but I’ve just spent (Typ waiting time 30 min.) a significant time trying to get a data sheet/ engineering evaluation of the Rad controllers they don’t appear to have one ( the eng/evl I can understand but the data sheet ) ?…
-
When in thermostat - At desired temp switch to Fan instead of turning unit of
Today the Tado turns the AC of when going outside temp range. It would be better to go over to Fan mode to continue to circulate air
-
Energy IQ calculation behaviour
The calcul for "Hestimate heating consumption" should be include the fix price of a monthly gaz plan. Overwise the amouth in euros can not be correct. Example with the French case: We have a fix price in addition to the volume of gaz they use every month. March, I had to pay 19.30 euros (monthly plan to have access to the…
-
Wi-Fi dropping out - and not communicating with all products in household.
Hi, Not sure if your Tado customers are aware that the problems they are encountering, are quite easily solvable 99 times out of 100. I had the same problem when I installed a Ring door bell, the wi-fi router was at one end of the property and the ring door bell was at the other, and I could not control the Ring door bell…
-
Naming radiators
I have a number of rooms in which I have more than one radiator but all connected under one Tado “room”. It would be good if each individual radiator could be named eg “under the window” so that one knows which battery to replace without having to say Hi to each radiator. This is particularly important when the radiators…
-
Individual geo location feature
Hi, i let out rooms of my house. I want to be able to turn off their thermostats when they are not in the house. So it would be nice there where user management in the app... HIGHLY MISSING!!!
-
Wireless Smart Thermostat
Hello, I would like this feature to be considered by your community members - To be able to turn on all radiators in the property at the touch of a button on the wireless smart thermostat, as you can on the App on a mobile phone/tablet - (Boost Heating All Rooms) - this to me is more convenient. At present the wireless…
-
More than one setting for each room
I have two rooms for which I regularly change the settings. I would like to be able to have two alternative settings for each room so that I can switch between the two and not have to completely reset the room each time.
-
Add undo button to scheduler
It is very easy to make a mistake when designing the schedule which accidentally deletes all the changes you've previously spent time making. Please can you add an undo button to undo whatever you did last. This could go next to the copy paste buttons quite nicely.
-
.set all rooms at same time
Add a button that will reduce the temperature by 1 degrees at every press and another the minus 1 deg. So you can set your complete system up or down at a touch
-
Show energyIQ in GBP
Show consumption costs in GBP in energyIQ
-
Create limits for heating
To create a limit for the heating for when someone is staying over
-
Boost by 5° not up to 25°
I have my heating relatively low but if it dips a few degrees and I want to boost it I don’t want to boost to the maximum 25. 5° more than the current temp would be enough. In this age of trying to be energy efficient and a fuel crisis maxing out the temp is illogical
-
make geofencing free.
I was always surprised that geofencing needed a subscription. When receiving this email below. Geofencing has a much bigger impact. So make geofencing free. "Take action now to reduce energy consumption in a joint effort Hello Robert, Did you know that lowering your home temperature by 1°C will reduce energy consumption by…