-
Introduce a learning ability to Early Start for radiators
Using the data a thermostat picks up about how your house heats and cools, and the time taken to reach/maintain a temperature introduce custom smart start/finish to scheduled events . At least add a 'radiator' version of Early Start.
-
add LPG to Fuel type
would i be possible to add LPG to Heating Type with the calculations to work with graphed data to reflect price and KWH for unmetered connections
-
Open window toggle
Can we add in the option to tell a thermostat that you’ve opened a window. Many times a window might be open but it’s not detected and as the temperature drops the heating kicks in. Currently if I open a window I have to lower the thermostat so it doesn’t kick in but if I could just switch it to open window so the…
-
Temperature presets
When adjusting the temperature for a specific block i do need to edit all time/day blocks individual, which is cumbersome. An enhancement could be the ability to have a couple of preset temperatures which can be assigned to the time block. Like "high temp." "low temp." "night temp." And when i then change the preset all…
-
Energy IQ Improvements, look back and electricity
The energy IQ feature is on the right track. I would like to see a few improvements though. Being able to look back to maybe a years worth of inputs by swiping on the graph would be good. Also being able to add your electricity readings in so you can keep tabs on electric radiators/air conditioners etc. Wouldn’t anyone…
-
Temperature adjustment
I wanted to set the actual room temperature on to the radiator thermostat searched everywhere on the app only to find it’s not on the app only the website which seems a bit backward ideally they should mirror each other
-
Graphs
It would be nice to see the temperature and humidity or moisture content graphs on the web site as well as on the app
-
Recommend a Friend scheme
Following the success of my own tado system, I recommended it to my son who has now installed a full system covering 15 radiators. I contacted Support to enquire as to whether there was a ‘recommend a friend’ scheme that would provide a benefit for me against future purchases, and was told that there wasn’t but it was a…
-
Hot Water Catch Up
Hi One issue is that when the geofencing controls the hot water, and you are out for the day and your scheduled timings are not done, you come home to no hot water :( It would be great if there can be a setting for a 'Hot Water Catch Up' that would identify if a hot water schedule has been missed, and Geofencing identifies…
-
Summer eco
Is there a summer eco setting or can we have a summer eco setting? This could work really simple with one on/off toggle like the “Early On” feature (Early on known to us in the industry as weather optimisation). How this could work is the end user could turn on/off summer eco. when on you could set your own summer eco temp…
-
Allow "Auto" within HomeKit
Many smart heating systems when exposed to HomeKit allow the use of "OFF, HEAT and AUTO", even Drayton Wiser which can only be exposed through a custom made plug-in via homebridge can use AUTO. The AUTO function (at least as I see it) would allow the system to return back to the current schedule. For example, in HomeKit I…
-
Low Battery Display
Hi would it be possible to show battery status on main menu where all rooms are displayed, this would save going to settings menu to check battery status. Many thanks Stuart
-
Features of the mobile application / Fonctionnalités de l'application mobile
I am a happy new owner of a Tado system with a base kit + 6 thermostatic heads, but I had 3 questions about the mobile application (Android): 1- On the home page of the App (home icon), is it possible to see at a glance if the wireless receiver (connected to my boiler) is in heat demand for one of the different rooms…
-
Boiler problem detection
My idea for a new feature, came to me when we was having trouble with our boiler. So the idea is tado could notify you (via the app) if it detected a possible problem with the boiler. I think this could work by tado noticing if it turns the boiler on but the heat is not increasing. As at the moment tado stays the heating…
-
Heating system efficiency score
It would be nice if Tado analyzed how efficient my heating system is. Maybe we could specify the area of the home, and with using of the consumption and weather data it would calculate the efficiency.
-
Heating graphs on webpage
It would be really useful if the webpage could show the heating graphs that can be viewed on the phone app. It could also be useful to be able to download the graph data in some form.
-
Early Finish
As we have underfloor heating, the early start feature has meant that (over a few days), the thermostat has nicely learned that it needs to come on early to get to temperature. At the other end, if I set the finish time at 2200, there is no point the thermostat asking for heat for at least an hour or so before this time as…
-
Configurable Boost Timer
Feature request: to be able to set how long the boost heating button should last for as 30 mins can be quite shotr especially if you’ve been away and are heading home outside of set heating hours.
-
Option turn off LED
an option for the led display to be turned off, perhaps only when actually used, for example. The display lights up a dark bedroom and can be disturbing.
-
App suggestion front page dashboard heating room
Can you show in the overview of the room with the small heating icon,which room is requesting heating? Right now I have to open each of them individually to see which one is triggering my kettle to run. Would be easier to see this in front screen
-
Lower flow temperature for nighttime use
Our heating is working beautifully but given gas prices and the cold, we would like a more cost effective way of keeping bedrooms warm in the winter. In practice what happens today with our tado and viessmann 200 w digital link is that the valve in one or two bedrooms partially opens every hour or so to keep the bedroom at…
-
Humidity warning
Hello, I like Tado very much, but I have a new request. The new feature of the air humitity in the rooms is really nice. But what would be very nice is that we get a warning if the humidity in a certain room is too high and if we have to open the window. That would be great! Thanks in advance! Greets from Belgium, Manu
-
2 of 3 verschillende Slimme schema's
Is het een idee om meerdere slimme schema's te kunnen maken. Welke je kan selecteren. Bijvoorbeeld: Slim schema 1: Normale week Slim schema 2: Thuis werken Slim schema 3: Vakantie (dus later uit en in bed dan normaal)
-
Global override
Having very recently installed a Starter Kit V3+ which wirelessly controls heating and water, and having added Smart Radiator Thermostats to 9 out of 13 radiators in the house (three of those without TRVs being towel radiators, the fourth being the obligatory 'reference' radiator in the hall), the following shows up: The…
-
Heat Boost on smart Thermostat
Is there a way to enable temporary adjustments of the room temp on the Smart Thermostat? I (or the wife & kids) would like to boost the heating on the thermostat without the need to remember to open the app and “resume schedule” afterwards.
-
jamming of the needle which open and close a valve body
Je voudrais faire une suggestion d'amélioration à Tado: J'ai observé à de nombreuses reprises des blocages des pointeaux qui ouvrent et ferment un corps de vannes lorsque celui n'était pas actionné pendant un moment. Ce phénomène de grippage peut se produire en été mais également en période de chauffe dans des pièces…
-
Floor heating -> Open Window Detection = keep current heating setting
Hi, open window detection works fabolous for me in terms of recognizing open windows quickly. However, for floor heating, the action of switching off heating for a short 5-10min ventilation of a room does not make a lot of sense from my point of view since the floor heating is anyhow quite slow in reaction (compared to…
-
Expand Tado product line: Radiator fans
Hi, I'd like to make a suggestion to expand the Tado product line to include Radiator fans. In my country, The Netherlands, it's mostly standard to have central heating, with radiators installed throughout your home. Since we have a mild climate, a way of projecting heat (like an A/C) is very rare. Radiator fans have shown…
-
Notification on Phone when Window is Open
Would it be possible for the Tado app to create a notification pop up on your phone to let you know that a window is open?
-
Winter
Could it be possible to make a function on the app that is configered by the user. Like a configurabel remote-control on the phone. The case is that I use my tado to remote my air-air heater. There is a function on that heater I cant start, or end, by the app. Its a function on a Mitsubishi heater, Nordic. That function is…