-
Swipe to switch between rooms
Or be able to change temperature from the view with all rooms.
-
Notification when the device triggers the heating to turn on
In the past the heating has been turned on even though it has not been manually activated and the scheduled times have not been triggered. Obviously when no one is in the house this becomes a major issue, particularly with the rising cost of fuel. Can you develop a notification that an email or app notification is sent…
-
Suggestion for Tado App: Ability to rename "Other Devices"
A suggestion for the next Tado app update from my side would be the ability to rename the individual Tado X Bridges and Tado X Receivers in the same way it is possible with the Smart Thermostats. Since i have two bridges and 6 Wireless Receivers (multizone setup) it gets tricky to know which one is which one without having…
-
Individual temperature settings
It would be really good if you could have temperature profiles for each person and then one for when there’s multiple people home. I have my schedule set up so my partner is t cold, but I always turn it down when she goes out and I’m home. It would be nice if taco would see I’m home alone and reduce it to the temperatures…
-
Update for the TRV Compatibility CHart - Landis & Gyr
The TRV compatibility chart only has one type of clamp on Landis & Gyr TRV that is not compatible with Tado V3+ smart valves. My Landis & Gyr TRV heads have the standard 30 x 1.5mm screw fitting so the Tado valves fitted without any adapters. I have attached photos of the valve body and TRV cap.
-
OpenTherm Min Flow Temperature
My boiler is set to OpenTherm mode, with Tado V3+, and the maximum temperature is set to 55°C. Tado adjusts the heating temperature based on the outside weather, which works fine. However, I have a question about the minimum temperature: I’ve noticed that the boiler pump runs frequently, circulating water at 20–25°C. While…
-
Dew Point Control via TADO Smart AC Control V3+
V4.0 Climate Control via DEW POINT COMFORT - Triggers - Door, Presence, TTS, Home AssistantThis flow uses Outside Dew Point Temperature to control any Climate Entity through Home Assistant. Tested on TADO Smart AC Control V3+ this does not require a paid subcription to TADO. Home and Away Presence Sensing Door and Window…
-
Dry Mode Getting Jammed Home Assistant AC V3+
Dry mode is getting jammed on my Home Assistant instance. Won't allow any changes of mode from the App or Home Assistant after a period of time. The only way to get drying to show up on my home assistant thermostat card, with my Daikin is by: Setting up my Tado Smart Schedule with the Dry setting on. Activating Auto Mode…
-
Y plan denergise 3 port valve after CH
The Y plan system maintains power to the 3 port valve after CH has been on (but water off/not called for), whilst 3 port valves can cope with this they do use a small amount of energy and some hum rather annoyingly. Idea: When the Tado turns off the CH it could momentarily call for the HW only to denergise the valve…
-
Maximum flow temperature per smart thermostat
Please enable setting max flow temperature per smart thermostat, not per whole central heating system. When smart thermostat controlling underfloor heating calls for heat alone (radiators don't ask for heat) there is no need to heat the system so high. A lot of users have mixed systems (ufh + radiators) so it would be…
-
Add support for Worcester 8000 digital control
One of the biggest boiler brands in the UK, and yet there is no digital support from tado. I want my boiler temperature properly controlled and modulated, not just on and off. Tado markets itself as being compatible with a really wide range of boilers and controllers, so to miss this (for years) is appalling. I just…
-
More intelligent Balance
I have been using Balance functionality for a while now. The idea is great, however I find the "rules" for decreasing the temperature by 2° during high energy price periods too static. A few ideas to make this more "intelligent": If a "Balance period" coming up during which my "home" otherwise would be heated up a lot,…
-
Decrease burner power before lowering target flow temperature
Hi, I have a bosch condens 2500 boiler, connected with nefit opentherm-ems converter. Using this setup with tado x wireless receiver (+trvs, wireless thermostats), via opentherm control. As far as I see, this setup works well, changing the target flow temeprature and setting the burner power to minimum value happens, so…
-
Wireless Receiver status
I'd like to see some status on Wireless Receiver, which thermostat is activating, a diagram would be also good, I'd like to see what is the running time of my heater in a day, could be also an indication of which room/device started/use it. Also, in Home Assistant the status of the thermostat is "heat", never goes "off",…
-
Better explanation with regards to termination of the old thermostat wiring.
I have recently installed the V3+ system and everything went well with regards the installation. I could see all the devices on the app and all the test procedures passed on the Wireless Receiver. However, the heating and hot water would not work. I was convinced I had done everything correctly and was struggling to…
-
Change your shipping delivery service provider
Not just me, but many other customers from ROMANIA are dissapointed with the service provided by UPS. Packages from Tado and other european businesses are not delivered and the reasons invoked by UPS are FALSE: incomplete contact information, the receiver was not available for delivery. UPS doesn't contact the receiver at…
-
Please implement Dark Mode for app.tado.com
Please add dark mode for the web app. It would enable me to control my home after dark without sunglasses on. This should be low hanging fruit. It's basically just adding some css.
-
Allow combining Smart AC Control and Smart Radiators in one room
Currently, Tado App doesn’t allow combining Smart AC Control and Smart Radiator in the same room. Please enable this feature.
-
Tado x Thermostat - Set the MAX temp
Hi, I need (so fast as possible) the ability to lock (via software) the thermostat X or to set the max temp so that people cannot set the temperature above the set threshold. Urgent!!
-
Configurable "How many degrees to change"-setting for X devices
Especially for X, it is a pain for non-technical users to use the device manually, especially to turn it on and off. This has changed since V3, as X seems to require much more movement on the device I would therefore like to be able to configure a "How many degrees to change"-delta value for my household. It should be…
-
Enable tado on wifi without internet
Today I had 6 hours without heating in the winter. My internet was not working for 6 hours. Tado expects the bridge to be connected to internet for smart scheduler to work and connect with wireless thermostats. Why not enable bridge using wifi home without internet? A heating system should never rely on internet. Relying…
-
Making smart schedule more smart
Would be nice have one page in which they are group the history for heating activity of all rooms together, to have more clear when the boiler can be left off reducing one or more temperatures at a certain time. (Sorry for my English)
-
Guest car support
For guests using the home charger, offer the capability to control the charger timings by: - manually setting start and finish state of charge - departure time - make/model of car
-
Heating System Override switching it on for 1hr, 2hr 3hr or set a time
Strangely, the Tado system allows you switch on the hot water heating for a specified time outside the schedule. But it is not possible to do the same for the heating. Instead, you have go into each device, which is a ridiculously time consuming and fiddly process. Yet, it is standard functionality on most central heating…
-
Hot water override
need an ability to 'boost' hot water for a short period of time. We have a system with a hot water tank. Sometimes we can run low on hot water and need an option to boost it for a short period - say 30/45mins. Currently the app allows you to override the schedule until the next event, inevitably it means you turn on the…
-
Tado x regolare la temperatura dei caloriferi, impostare icona quando la caldaia è accesa
Buonasera chiedo di poter impostare su ogni testa termostatica la temperatura di mandata nel calorifero per tutti quelli che non hanno il protocollo opentherm in modo tale da regolare automaticamente con l'algoritmo in base al meteo ecc la temperatura dell'acqua dei termosifoni. Mettere una spia su app per vedere quando si…
-
Geolocation Improvement's for Mobile users W3W?
Tado like devices often get repurposed into not conventional ‘homes’, such as canal boats and Rv’s Could the home location be made dynamic either using data from the home network ( our teletonica router has a gps function)? If that is too complicated or not possible due to the hardware limitations in the internet bridge,…
-
IFTTT replacement - customised boost temperature and duration
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could features like this be integrated into the app then? It seems like an easy change, we can already boost, it just needs to…
-
tado GmbH Incident - degraded performance affecting the tado° app - 19 November 2024
Yesterday, as reported by tado GmbG Inicident, there was a temporary degraded performance affecting the tado app. Just to inform you how this incident may have affected my Panasonic Aquarea heat pump system. It appeared that the heat pump did not warm the house at all for some hours. Due to the heat already present in the…
-
Set Humidex instead temperature
It can be useful to have the option to set the perceived temperature instead only the normal temperature. In the high humidity zones temperature is not significant. It would be nice to trigger the air conditioning with your wireless control to decrease humidity.