-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Support more than 10 rooms and 25 devices
Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 25 devices is not enough when you want radiator TRVs and smart thermostats in each room. also limiting the total rooms to 10 does not work in this environment either. Please,…
-
Mounting Tado receiver on pattress box
Has anyone else found the necessity to remount the Tado receiver on an existing double pattress box mounted in the wall and feeding the wires You will have discovered that the mounting holes on the Tado unit are not spaced to line up with the usual mounting tags in the pattress box. An awkward work around seemed necessary.…
-
Room heat indicators in house overview.
Hi Tado. Can we get the 3 little heat indicator line on all the room tabs in the home overview. It really annoying to have to go in to the room to see if this room is heating or not at that moment.
-
Toggle wireless receiver to keep central heating always on
If you have a multiple central heating zones on a s-plan or y-plan system (common in the UK), you require your wired thermostats to take command of your heating (as they are wired to valves that divert central heating to the zones). This doesn't mean the heating is always on, it just delegates control to the thermostats as…
-
Manage email notifications
I suggest a feature to manage which email notifications to receive. Concretely I often receive emails like "Your Smart Radiator Thermostat needs new batteries" despite being plenty informed via the app - and there is, quite surprisingly, no option to unsubscribe. My proposal is to let the users decide which emails they…
-
how to add a second (and 3th) home with Tado to my app
As a satisfied Tado customer who installed the system in his home several years ago, I recently added Tado to the student house where my children live. I also considered installing Tado in my office, including air conditioning control. However, I discovered that the Tado app, installed on a single device, can only control…
-
Telephone Support
Please can we have telephone support, the chat support takes too long whilst I am unable to control my heating. If chat support is going to be the only option, you should reply within the hour and also have agents available outside of normal office hours when people are free to actually contact you. I started the chat on…
-
Hot water tank thermostat controller
Hi I would like to request a hot water tank thermostat and controller so both temp can be seen and profiles set.. Tado can then weekly exercise the systems hot water valve so it does not seize closed. Jas
-
Weekly valve exercise TVRs + hot water valve + zone valves
Hi I used to have I terrrier units and they would weekly exercise the valves i.e. fully open and close to ensure valves do not stick. Also with boiler and separate hot water tank valve and central heating valve needs a weekly poke to open and close both. I have solar so in summer and a emersion element so neither of the…
-
Add a hot water 1 hour boost button in app
To save going into scheduling for short periods or having to switch hot water off rather than defaulting to the next change please add a simple 1 hour boost button.
-
Range Limitation Publicity
This community shows that lots of people are having range problems in larger houses. But nowhere in the product information does it mention that all devices have to be within range of the Bridge and that thick walls will adversely affect the range. I have my Wi-Fi router at one end of the house and my boiler at the other…
-
Relay and Opentherm together
The Tado extension kit can control the boiler through a relay (simple on-off switch) or through the Opentherm bus. The bus allows for better temperature stability and higher efficiency as it tells the boiler to turn the heating up or down as necessary. If a heating system contains other elements, like a shut-off valve or…
-
Data export
Please allow download of chart data for each room. This would be most useful as a CSV file. Data available should include date/time, actual room temp, demand temp (what the heating has been set to), humidity, open window detection, etc. I would like to be able to analyse my own data, and be able to make easier comparisons…
-
Switched Fused spur / smart plug controller
Hi, I really like Tado and we have smart thermostats on all our radiators. However, we also like our electric fire on in the living room from time to time. It would be nice if there was a switched fused spur or smart plug option so we could control all our heating devices through Tado. We could control the fire through a…
-
Anthracite RAD Thermostats.
Got two lovely anthracite rads in my house but don't want to add white rad thermostats on them. Good idea? Some other colour options would be good.
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
Radio signal information
Show information about signal strength between each component and the bridge, so as to have an idea of where to put the bridge to improve the connection with the other components.
-
Always on display
Beste Ik zou het graag zien (in de toekomst) dat de temperatuur altijd af te lezen is vanaf de thermostaat, zonder op die knop te moeten drukken. Kan dit worden gerealiseerd? Dit dan vooral bij de bedrade thermostaat zodat het geen batterijen kost.
-
Temp/Humidity graph improvements
Please consider the following Temperature graph improvements... add increased resolution grid lines, ie. 1 degree and hourly coloured line showing set temperature join each 24hr section. No gap, same vertical grid resolution add to PC version app Thanks
-
Individual Geofence Option
Hi. Not sure if this has been mentioned before, but would be great if you could set-up individual Geofencing capability for each individual Smart Radiator Thermostat. To explain, I am often away from home for several days at a time for work and would like to be able to automatically detect this and shut off the Radiator…
-
“Saved Schedules” Idea
Hello, I have seen some posts about shift workers. To echo these. The way of editing schedules is very fiddly and time consuming, especially when you have a different shift pattern each week. It would be more beneficial to have “saved bank” of specific days and specific weeks you work, and you can quickly copy them into…
-
Develop a "basic backup schedule" mode for when Tado outage or loss of internet
tado EDIT 10.02.2021: Please read my statement on this topic here: https://community.tado.com/en-gb/discussion/comment/22789/#Comment_22789 Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property,…
-
Hot water boost via app
There used to be functionality using the app whereby you could boost the hot water for a limited period of time, say 1/2 hr then it would return to schedule. As it now works you can only override the schedule and turn the hot water on. If you then forget to turn it off it will run 24/7, not good at all..
-
Add hot water boost - instead of manual control under hot water settings
In order to boost the hot water for a time period (eg 1 hour) you have to go into Rooms & devices, settings, hot water and then finally access the manual control. It would be a lot easier and more user-friendly and intuitive if there was a simple boost button under Hot water icon. In case anyone is following all the…
-
Hot Water 'Boost' Button - 30, 60, 90min options
We have been using TADO for 2 years - and its worked well, and so recently installed the Hot Water head unit. We find that there is a big need to have a quick way to turn on the Hot Water for just enough time to heat the tank for one bath/shower or to heat the tank for a couple of bath/showers and then possibly even…
-
Smart Radiator summer / maintenance / bleeding mode (leaving the radiator open)
When summer comes, the valves should stay in open position. With the currently available modes, specially referring to "OFF", the valves stay closed. This is dangerous for the valves themselves, risk to get stucked, and for the pumps of the boilers which run periodically to prevent pump lock due to long inactivity.
-
iPhone/Siri Shortcuts Support
TADO application doesn't appear in Siri/iPhone shortcuts. This application is very powerfull and, though complicated to use, can do much more than IFTTT in the Apple world. Tado must support Siri shortcuts. Homekit is obviously supported and a few (very limited) number of things can be done that way. Please support me.
-
Ability to use Wireless
Tado needs the ability to use multiple wireless temperature thermostats to control different rooms independently.
-
Create a range extender or let us use a second bridge...
Having olny 1 bridge per house is a massive design flaw yet to be addressed by Tado. Unless you leave in a tiny house made of cardboard walls, the TRV wlll lose connection or burn batteries in only a matter I'd a couple of weeks. I live in a house across 3 floors, I really struggle with the range and can't have full…