-
Google Assistant An Alexa new (hot) keywords (resume schedule or resume heating schedule)
I am missing a feature for the google assistant and alexa. Feature to say "resume schedule" or "resume heating schedule" I think that this will benefit a lot of people. when you do a manual overwrite of your schedule it does not automatically resume the heating schedule Dutch : Ik mis het commando "schema hervatten of "…
-
Notification requests...what does the community think?
2 requests I would like to see on the app: 1. The status of the heating indicator on the receiver whether on or off I would like to see in the app on the home page. I know you can see it by clicking into the individual rooms but this doesn't tell you if the heating on receiver is on or not. This only tell you the…
-
No Zone Controller via Schedule
I did search but could not find anything regarding this, I would like to see the ability to assign a rooms ability to allow the room NOT to call for heat the room during the day, and at night allow the room to call for heat. This would allow the room to not drop temperature too far during the day. What do you guys think ?
-
Activate Home mode via timer or at a specific time
It would great if I could schedule to active home mode at specific time. e.g. 3 hrs before I get home from a weekend vacation.
-
FEEDBACK
I love my TADO product but whilst I appreciate you think you’re moving into the future by only allowing online chat to consumers but for me it’s very limiting/time consuming and in my humble opinion would not make me buy your product.
-
Named schedules for different situations
I have a 4 bedroom house in which I live with my wife, however, we often have visitors. We only need certain rooms heated for our own use but we have a childrens bedroom which we want heated to a specific schedule when our grand children stay over. We also have a bedroom and bathroom which we only want to heat when we have…
-
Add new colour to the Temperature graph for "Early Start"
As title say's I think it would be nice to add a different colour to the graph that depicts when "Early Start" was invoked. to this graph
-
Increased Aircon Functionality
1) My Aircon has boost and eco on the remote. Could these be added to Tado app please? 2) Auto on my remote alows +/-6c around 24c. The Tado app does not allow temp setting in this way in Auto mode.
-
Smart Radiator Thermometers
I previously purchased smart radiator thermostats for my Tado system however they were too noisy in the bedrooms and led to a few queries which I raised with Tado (however they have asked for these queries to be posted here). Hopefully there is a solution! Is there a way to set the bedroom smart radiator thermostats so…
-
More controls over temporary temperature changes
When it comes to the room controls when you manually override the set temperature it would be good to have the following options: A shortcut to bring forward / advance to the next programmed setting e.g. if it's 1pm and the heating schedule will change from 10C to 20C at 2pm, I could press a button which will automatically…
-
Silent Operation during defined hours
We have manual TRVs before. Of course, they didn't shut off when we left the house, but at least they don't make a sound. Currently our Tado TRVs wake me up at night, despite sleeping with earplugs. The entire family are a bit surprised by the noise these TRVs make.. So, I want to suggest Tado adds a "silent operation"…
-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
Turn off whole system for specific timed limit
Hi all, my suggestion is to be given to option to turn off the whole system for a time limit as you can with each individual thermostat. My family’s schedule isn’t the same day to day or week to week and changing the current schedules on a daily basis is time consuming. However when that last person leaves we do know when…
-
Multiple bridges per house/apartment
We live in a large house with thick concrete walls. It is difficult to cover the whole house with one bridge respectively to reach all Tado products with one central bridge. I have two bridges at home, but I can only register one in the app. It would be very helpful if I could register two (or more) bridges. This way I can…
-
Wireless receiver status in app
Can we show wireless Status in the tado app?
-
Tado device automatic restart
Hello. Each electronic device needs a restart one in a while. My Tado device needs a restart once a week otherwise it will stop issuing commands. Everyone may have or will have the same problem. Hence, it would be good to implement a feature of automatic restart once or twice week (at night for example), so to avoid that…
-
Add installer menu on the app
I was not home today and someone from customer support did rebooted my system from R01 relay on/off to digital opentherm D01 and as a consequence i can see the temp inside my house is dropping (-3°C outside) ,heat request at max.{{{ waves but cause of the rebooted system the signal will not go to the boiler to fire cause…
-
Provide motor torque control
The automatic mechanism that controls how newtons of force that the valves need to register as closed is not always correct. Please provide a way to finetune thermostats.
-
Oil Tank level monitor
Would it be possible to develop a Tado compatible heating oil tank level monitor?
-
"Nomatterwhat" shut down schedule
Hi there! I would suggest that in future versions of the app a ("No matter what") shutdown method could be scheduled. I mean it would be really helpful the possibility of scheduling a Shut-down whatever the previous situation was. No matter if I started the heating manually, it will shutdown at 23:00 because I scheduled…
-
Linked Hot water / Heating
I have a boiler with a hot water tank. I have both the Tado thermostat and hot water extension unit. It would be handy to have a setting to have the hot water sort of 'boost' when the heating was engaged... If the boiler is on and working then there is no reason why the hot water couldn't also be working.
-
Add arrows to Smart Radiator Thermostat to show where to turn
Tenants, particurarly in short term rentals, do not understand how to set the temperature on Tado Smart Radiator Thermostats. They often try to turn the wrong part of the device and end up with unmounting it. We got several broken radiator thermostats because our guests accidentally unmounted them and the devices fell…
-
"Slave" functionality: open the trv valve but don't demand hot water
Hi. I have a towel rad in my bathroom. I like the idea that my towels are kept dry more than I like to control the temperature in my bathroom. It would be really useful if i could 'slave' my towel trv to the heating for a time block. By slave, what I mean is that the trv will remain open during the slave slot, meaning when…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.
-
TRV quiet mode via minor increments over time
An option to set a TRV, such a bedroom, into quite mode. This will slowly adjust the TRV in small increments when getting close to temp, or when needing to heat the rad. This will be extremely useful in bedrooms, as the sudden adjustment wakes the kids and wife every morning and night.
-
Multi Zoning with Profile Creation
Recently bought Tado. However unlike my previous setup where my Radiators where controlled by 2 Thermostat. One Honeywell Dial which was wired controlled all off the Downstairs Radiators to separate heating the house. To save on Energy. The second one was a Drayton Wireless RF Unit that contolled and heated the Entire…
-
Add other devices that can use the hub and app
Of course you can think of lights and alike, but there would be many, many competitors. Adding a smart smoke and heat detector, would be beneficial. This is not a complicated device, the majority of the technology is already designed by tado and, well, a smoke detector ain't something complicated. Same hub could be used…
-
Battery change without dismounting
Re-design your smart radiator valves so that the batteries can be changed without removing the device. This will make it easier for users and will stop the issue of the valve not being mounted properly.
-
Inefficient radiators
Inefficient or wrongly sized radiators could be identified easier if the durations of use or daily call for heat durations are displayed for each radiator. Any radiator running longer than others (provided it's fairly substantial) would identify that the radiator is performing poorly. The system or app currently shows…