-
Smart Radiator Thermometers
I previously purchased smart radiator thermostats for my Tado system however they were too noisy in the bedrooms and led to a few queries which I raised with Tado (however they have asked for these queries to be posted here). Hopefully there is a solution! Is there a way to set the bedroom smart radiator thermostats so…
-
Master Graph, All TRVS and Thermostats
A graph that shows all TRVS and then they are calling for heat. This will help to diagnose and create better efficiency, by tell you when the boiler is being switch on and which room called for the heat. It could be linked to the wireless boiler extension.
-
TRV quiet mode via minor increments over time
An option to set a TRV, such a bedroom, into quite mode. This will slowly adjust the TRV in small increments when getting close to temp, or when needing to heat the rad. This will be extremely useful in bedrooms, as the sudden adjustment wakes the kids and wife every morning and night.
-
"Slave" functionality: open the trv valve but don't demand hot water
Hi. I have a towel rad in my bathroom. I like the idea that my towels are kept dry more than I like to control the temperature in my bathroom. It would be really useful if i could 'slave' my towel trv to the heating for a time block. By slave, what I mean is that the trv will remain open during the slave slot, meaning when…
-
Hot water cylinder temperature control
I have the hot water extension kit installed next to my hot water tank. probably as per most peoples set up. It would be nice to have a wireless piece of kit that replaces the hot water tank temperature gauge that either connects wirelessly to the hot water extension kit or is wired in...
-
Linked Hot water / Heating
I have a boiler with a hot water tank. I have both the Tado thermostat and hot water extension unit. It would be handy to have a setting to have the hot water sort of 'boost' when the heating was engaged... If the boiler is on and working then there is no reason why the hot water couldn't also be working.
-
Tado device automatic restart
Hello. Each electronic device needs a restart one in a while. My Tado device needs a restart once a week otherwise it will stop issuing commands. Everyone may have or will have the same problem. Hence, it would be good to implement a feature of automatic restart once or twice week (at night for example), so to avoid that…
-
Merged: support for multiple internet bridges
This discussion has been merged.
-
Add a lock mechanism to Smart Radiator Thermostat
Currently anyone can easily unmount Tado Smart Radiator Thermostats, accidentally or on purpose. This can damage the device. Users other than the owner/maintenance team should not be able to unmount the Smart Radiator Thermostat. Please add a lock mechanism to prevent easily unmounting the radiator thermostat.
-
Add arrows to Smart Radiator Thermostat to show where to turn
Tenants, particurarly in short term rentals, do not understand how to set the temperature on Tado Smart Radiator Thermostats. They often try to turn the wrong part of the device and end up with unmounting it. We got several broken radiator thermostats because our guests accidentally unmounted them and the devices fell…
-
Do not count independent trv opening in heating time
I was away most of the day and one of my indépendant trv was open but the boiler was off (because away, as expected) The problem is that open time is counted in the heating activity, thus making these statistics totally irrelevant. Is it possible to only count the boiler heating time?
-
Multi Zoning with Profile Creation
Recently bought Tado. However unlike my previous setup where my Radiators where controlled by 2 Thermostat. One Honeywell Dial which was wired controlled all off the Downstairs Radiators to separate heating the house. To save on Energy. The second one was a Drayton Wireless RF Unit that contolled and heated the Entire…
-
Add other devices that can use the hub and app
Of course you can think of lights and alike, but there would be many, many competitors. Adding a smart smoke and heat detector, would be beneficial. This is not a complicated device, the majority of the technology is already designed by tado and, well, a smoke detector ain't something complicated. Same hub could be used…
-
Inefficient radiators
Inefficient or wrongly sized radiators could be identified easier if the durations of use or daily call for heat durations are displayed for each radiator. Any radiator running longer than others (provided it's fairly substantial) would identify that the radiator is performing poorly. The system or app currently shows…
-
Don't limit UK devices!
I bought a tadoº wireless kit last week and have had an absolute nightmare trying to get it set up, not least because of the terrible customer support from tadoº, but also because it has been decided to cripple the functionality of the devices in the UK! After spending £200 on this tadoº kit, I was faced with a prospect of…
-
Link smart reader to tado
Hi Each month I manually add my meter readings to the tado app but in the uk there is a company loopup which I have given access to my smart reader so it generates automatic reports. Perhaps tado could do the same or link up with loopup. Thanks
-
add name to devices
hello, it would be nice to be able to de a name to the devices in a room. for the moment we find the number there would be more understandable if we could add a name
-
Set TRV to a "minimum" temperature
I would like to be able to set certain rooms so they have a "minimum" temperature rather than a target temperature - which will fire boiler when lower, but not switch off the TRV at the desired temperature - simply just use the temperature to know that room won't request heat unless it goes below that. That will mean if…
-
Firmware 96.1 and Apple HomeKit
Same device, same tado° app Apple HomeKit tab - Firmware 91.1 tado° Rooms and Devices tab - Firmware 96.1 ¯\\\_(ツ)\_/¯
-
Constant Display
I would like the option to see a constant display on my wall control, thus not having to press a button to see the temperature. :)
-
More secure mounting system
Hello, I would like to have radiator mounting systems that are made of metal and not just plastic.
-
Maximum Temperature of the Boiler
I use tado on eBus interface. I want to set up myself the maxim temperature from the boiler. The condensing boilers are most efficient at 55-60%.
-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Manual override timeout
At the moment if you manually set a valve it stay on that setting until the next scheduled event happens. You should be able to set timeouts so it defaults back to the schedule- this should also continue to work without internet. Really it should apply to everything, hit water, heating, valves
-
Battery change without dismounting
Re-design your smart radiator valves so that the batteries can be changed without removing the device. This will make it easier for users and will stop the issue of the valve not being mounted properly.
-
TRVs too easy to remove
The Child lock feature is great, kids are drawn to the clicky knobs so being able to disable the manual control is great. However that leaves the problem of physical removal of the whole thing. It requires very little force to undo from the attached base, a 1 year old can remove it. It may be helpful to update the design…
-
Improve the design of temperature overrides in the iOS app
As a new user its taken a while to discover the behaviour of temperature overrides. The actually functionality is fine. As I understand there are three options: override for a specified amount of time override til the next time block override til someone makes another change It's also great that your last choice is…
-
Generate push notification by the app when Internet Bridge cannot be reached
When the Internet Bridge has an issue (either because it hangs or because my Internet connection is down), it would be great if I was notified by the app. That way I can resolve the issue as soon as possible. Currently I have to open the app to see that the app cannot connect to my system. Would be great if this was…
-
Make sure the heating schedule is available offline
When the Internet Bridge has an issue or the Internet connection is down, the Tado devices stop working. Recently my Internet Bridge hung during the night, which meant my heating system didn't start in the morning and the house remained cold. This can be solved by syncing the current schedule locally and keep using that…
-
Energy IQ split costs heating/hotwater
Is it possible to split the monthly costs in heating and hot water?