-
Tado App Privacy
All home users and their email addresses are visible to any user in the home. I would like to be able to hide the details of guests from other guests
-
Apply Flow Temperature Optimization to Multiple Tado° Thermostats (heat sources)
User Story: As a Tado° Smart Thermostat X user with multiple heat sources controlled by multiple Tado° Smart Thermostat X devices, I want to apply flow temperature optimization to more than one heat source via the Tado° Smart Thermostat X device that controls each heat source, so that I can efficiently manage the heating…
-
Boiler pump anti seizure exercise.
So my boiler originally had pump anti seize feature, but looks loke after installation of Tado it's not a case anymore. So I'm thinking adding this feature to Tado software will be really good thing to protect users heating system.
-
Worksheet Logging of QR Codes
Hi All, I don't know if this has already been done / provided by someone else, but, whilst building my TADO system and waiting for everything to arrive (thank you eBay), I started worrying about missing/damaged QR Codes. So, I built a google worksheet that can be used to store the QR code data, and provide the QR code when…
-
Calendar sync
I have a holiday let it would be great if you could sync it with a calendar - either on airbnb/booking.com itself or on google calendar. This would mean that the heating would automatically switch off when a guest leaves. Tado is great but there are so many better smart devices out there.
-
Single App or Bridge linking V3 and Tado X.
I propose a single App and / or a bridge product to links V3 and X products. This would enable those on V3 to extend their systems to reach distant radiators. Reason: Many people have invested in Tado products for their home on V3. These people identified the problem that Tado V3 had limited range and some radiators could…
-
Enable Apple Home Group Accessories
The Apple Home app allows you to group multiple accessories together so that can be controlled through a single widget. This is particularly useful for when there are multiple radiators in a room. This should be a very quick and simple feature to enable, but a meaningful QoL improvement for users.
-
Away overrides manual schedule...
In tado V3 when I had a room set to "frost protection" until I resume schedule, the room remained in this setting even when I got away. Now in tado X when I go away, ALL the rooms change to AWAY setting… this is not correct, as I have rooms that need to stay off until I change the setting, just like the interface says…
-
Away notification to all devices
Send a notification to all registered mobile devices when the house becomes unoccupied. This will allow anyone to turn the heating off rather than leaving the onus on the last person that leaves the house
-
Display the system time and set system time in app.
My system is 2 hours out and makes life difficult for me. Can I request that you please consider giving time setttings control over to the end user? My post code seems to be the place where the Tado cloud pulls my time zone, but in my case it is 2 hours behind my correct one. Make it easy for me to see what time Tado…
-
smart radiator thermostat X with straight joint (frontal screen)
Can you please consider designing the smart radiator thermostat X with a straight joint, as an alternate option to the current T joint? The T joint does not work well with modern radiators, which have the valves pointing "frontally", thus resulting in the screen of the knob pointing either downwards/upwards or to the…
-
AI based scheduling assistant
I find setting up the schedules a little bit clunky as I have 8 thermostats to set up so I wondered whether there was scope to instead have the app ask you a few questions and then set up the schedule for you. Such as it could start with asking a series of questions about which room do you sleep in. What time do you get up…
-
Timing of self-calibration
From time to time, I've heard different (Tado X) TRVs go through what I think is a self-calibration routine whereby it adjusts the valve in and out in small increments. While I agree this is a useful feature, it's not great when it happens in the bedroom in the middle of the night ;) Might it be worth setting this up as a…
-
Away mode planner by date/hour (agenda)
Away mode is one of the reasons for us to buy into Tado to remotely turn the house heating down when we leave for a day, weekend or multi-week holidays and forgot to do so before leaving. Though it happens more than I like that after 1 or 2 days after leaving the house, we only think about having forgotten enabling the…
-
Central heating possibility to set the off heating hours with tado X...
I live in a building and we have a central heating system with 14 hours of heating a day. I have 12 valve and 11 wireless tado x sensors. It would be good to "tell" tado the hours in which the central heating is off so when I'm away and i put 15 degree of minimal temperature the tado software knows that it can heat only in…
-
Make the source of Open Window notifications easily (or ineed at all) discoverable
The current tado app for Android gives Open Window notifications if this is set up for rooms. If such a notification follows, you as a user want to know which room the notification applies to. However, the notifications only say that an open window has been detected, but do not provide information about where. Tapping the…
-
Koelen door radiator knop open te zetten
Het zou mooi zijn als de radiator knoppen en stand hebben waarin het ventiel open staat, zodat een warmtepomp koud water door de radiatoren en vloerverwarming kan blazen. Ik schroef nu alle knoppen in de zomer eraf, dat werkt. Maar zou toch niet nodig moeten zijn.
-
Group rooms into "areas"/"zones"/"events"
To be able to change temperatures settings to predefined levels in several rooms simultaneously depending on time of the day or an event e.g. an event could be "going to bed earlier" -> increase temp in bathroom and sleeping room while turning off heating in living room and kitchen. An area could be "home office" and would…
-
Individual temperature settings
It would be really good if you could have temperature profiles for each person and then one for when there’s multiple people home. I have my schedule set up so my partner is t cold, but I always turn it down when she goes out and I’m home. It would be nice if taco would see I’m home alone and reduce it to the temperatures…
-
Update for the TRV Compatibility CHart - Landis & Gyr
The TRV compatibility chart only has one type of clamp on Landis & Gyr TRV that is not compatible with Tado V3+ smart valves. My Landis & Gyr TRV heads have the standard 30 x 1.5mm screw fitting so the Tado valves fitted without any adapters. I have attached photos of the valve body and TRV cap.
-
Dew Point Control via TADO Smart AC Control V3+
V4.0 Climate Control via DEW POINT COMFORT - Triggers - Door, Presence, TTS, Home AssistantThis flow uses Outside Dew Point Temperature to control any Climate Entity through Home Assistant. Tested on TADO Smart AC Control V3+ this does not require a paid subcription to TADO. Home and Away Presence Sensing Door and Window…
-
Dry Mode Getting Jammed Home Assistant AC V3+
Dry mode is getting jammed on my Home Assistant instance. Won't allow any changes of mode from the App or Home Assistant after a period of time. The only way to get drying to show up on my home assistant thermostat card, with my Daikin is by: Setting up my Tado Smart Schedule with the Dry setting on. Activating Auto Mode…
-
Y plan denergise 3 port valve after CH
The Y plan system maintains power to the 3 port valve after CH has been on (but water off/not called for), whilst 3 port valves can cope with this they do use a small amount of energy and some hum rather annoyingly. Idea: When the Tado turns off the CH it could momentarily call for the HW only to denergise the valve…
-
Add support for Worcester 8000 digital control
One of the biggest boiler brands in the UK, and yet there is no digital support from tado. I want my boiler temperature properly controlled and modulated, not just on and off. Tado markets itself as being compatible with a really wide range of boilers and controllers, so to miss this (for years) is appalling. I just…
-
More intelligent Balance
I have been using Balance functionality for a while now. The idea is great, however I find the "rules" for decreasing the temperature by 2° during high energy price periods too static. A few ideas to make this more "intelligent": If a "Balance period" coming up during which my "home" otherwise would be heated up a lot,…
-
Decrease burner power before lowering target flow temperature
Hi, I have a bosch condens 2500 boiler, connected with nefit opentherm-ems converter. Using this setup with tado x wireless receiver (+trvs, wireless thermostats), via opentherm control. As far as I see, this setup works well, changing the target flow temeprature and setting the burner power to minimum value happens, so…
-
Wireless Receiver status
I'd like to see some status on Wireless Receiver, which thermostat is activating, a diagram would be also good, I'd like to see what is the running time of my heater in a day, could be also an indication of which room/device started/use it. Also, in Home Assistant the status of the thermostat is "heat", never goes "off",…
-
Better explanation with regards to termination of the old thermostat wiring.
I have recently installed the V3+ system and everything went well with regards the installation. I could see all the devices on the app and all the test procedures passed on the Wireless Receiver. However, the heating and hot water would not work. I was convinced I had done everything correctly and was struggling to…
-
Change your shipping delivery service provider
Not just me, but many other customers from ROMANIA are dissapointed with the service provided by UPS. Packages from Tado and other european businesses are not delivered and the reasons invoked by UPS are FALSE: incomplete contact information, the receiver was not available for delivery. UPS doesn't contact the receiver at…
-
Please implement Dark Mode for app.tado.com
Please add dark mode for the web app. It would enable me to control my home after dark without sunglasses on. This should be low hanging fruit. It's basically just adding some css.