-
Generate push notification by the app when Internet Bridge cannot be reached
When the Internet Bridge has an issue (either because it hangs or because my Internet connection is down), it would be great if I was notified by the app. That way I can resolve the issue as soon as possible. Currently I have to open the app to see that the app cannot connect to my system. Would be great if this was…
-
Allow display of ambient temp always on by an optional setting
The display looks great, unfortunately my previous thermostat used to display the ambient temp which was really handy. Would be great to display it all the time or on a schedule—yes I realise this will affect battery life but users should be able to choose the trade off.
-
Link smart reader to tado
Hi Each month I manually add my meter readings to the tado app but in the uk there is a company loopup which I have given access to my smart reader so it generates automatic reports. Perhaps tado could do the same or link up with loopup. Thanks
-
Set TRV to a "minimum" temperature
I would like to be able to set certain rooms so they have a "minimum" temperature rather than a target temperature - which will fire boiler when lower, but not switch off the TRV at the desired temperature - simply just use the temperature to know that room won't request heat unless it goes below that. That will mean if…
-
Constant Display
I would like the option to see a constant display on my wall control, thus not having to press a button to see the temperature. :)
-
More secure mounting system
Hello, I would like to have radiator mounting systems that are made of metal and not just plastic.
-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Manual override timeout
At the moment if you manually set a valve it stay on that setting until the next scheduled event happens. You should be able to set timeouts so it defaults back to the schedule- this should also continue to work without internet. Really it should apply to everything, hit water, heating, valves
-
TRVs too easy to remove
The Child lock feature is great, kids are drawn to the clicky knobs so being able to disable the manual control is great. However that leaves the problem of physical removal of the whole thing. It requires very little force to undo from the attached base, a 1 year old can remove it. It may be helpful to update the design…
-
Improve the design of temperature overrides in the iOS app
As a new user its taken a while to discover the behaviour of temperature overrides. The actually functionality is fine. As I understand there are three options: override for a specified amount of time override til the next time block override til someone makes another change It's also great that your last choice is…
-
Change Temperatures for all Smart Rad Valves
I'd like the functionality to be able to change the temperature of all the Smart Rad values at the same time, so perhaps reducing the temperature setting all the valves at the same time
-
Make sure the heating schedule is available offline
When the Internet Bridge has an issue or the Internet connection is down, the Tado devices stop working. Recently my Internet Bridge hung during the night, which meant my heating system didn't start in the morning and the house remained cold. This can be solved by syncing the current schedule locally and keep using that…
-
Energy IQ split costs heating/hotwater
Is it possible to split the monthly costs in heating and hot water?
-
Energy IQ enhancement
[tado°] Your feature request Good morning Would it be possible to intergrate electricity consumption into the app preferably either by WiFi / Smart meter interaction, or manual read insertions so we can make good use of available information.
-
Future request: please add AUTO mode to Tado smart AC
Hi, I would love to have also AUTO mode beside COOLING, DRY, HEATING and FAN in the tado app and also if possible in HomeKit too maybe we are more people willing that it will happen
-
Definition og heating Interval per radiatorvalve
When heating, a radiator will continue heating, even if the radiator is very hot in the bottom. If it is possible to define a number of minutes per radiatior after which the heating will pause for a number of minutes. This will save the heating cost for those of us who pay per m3, and also for us who pay per KW, where…
-
Options to Limit Early Start
I like the idea of 'early start' and in general I think it works well. However, first thing in the morning there is a limit to how early I want the heating to come on, even if it doesn't get up to temperature in time (e.g. very cold mornings). This is because: - I would rather just live with it being a bit colder than…
-
Reducing the duration of heating scheduled time slots
Hello given the current energy crisis, I wanted to find out if you would consider changing the standard heating schedule time slots from a minimum of 15 minutes down to 10 minutes. It does not make sense that I am able to boast my heating for 5 minute intervals but the smallest interval I can set my heating schedule to is…
-
Tado will be better this way!
A. Keep it as it is. B. Give us local control if internet down( with some limitation on the app,course!). C. Make it more reliable and trustworthy (point B included). D. Better inside coverage of the bridge and strenght signal on the app for all zones covered. Maibe our votes will be read and seen by the Tado customer…
-
Tado Temperature Sensor to log temperatures below 0 degrees C
Hello, I'm using the Taco Temperature Sensor in my garage to purely measure the temperature. I found that there are hardly any temperature sensors that are connected to the cloud and can be read without being connected to the local wifi network. In my garage, it sometimes gets below 0 degrees C. The Tado app doesn't…
-
Tado...in the clouds!
Tado is unreliable,i use it for a while but disappointed,just an app for a lot of money,sistem has many many flows cause is cloud based,that is the main issue. Lucky me i have my old thermostat and i am using weather compensation with it and my trouble with Tado has ended,no connection lost,no lost of heat and less gas and…
-
Two ideas
1). For Combi users, develop a sensor that monitors system pressure and always when low. 2). For oil users, develop a decent tank monitoring system. I'd buy both. Tom.
-
Can we get smaller buttons?
I don't see the point in having to scroll down to see all the rooms, and then all the environmental buttons. It would be great if there could be an option to resize the buttons (e.g. specify how many in each column). Likewise, the quick buttons at the top require horizontal scrolling when again they would be in columns.
-
Confirm boiler shutdown before closing last rad valve
Hi, If the Tado app made sure it turned the boiler off before it closed the last radiator valve then this would allow the whole heating system to have tado valves on each radiator. In our house we have a nursery radiator which comes on regularly through the day and night. Because some radiators don't have thermostats…
-
Show radiator and boiler relay status in app
Hi, I think it would be nice to see the valve position status in the app. Obviously if the set temp is above the actual temp then Tado wants to open the vale, but it would be nice to see the feedback so you have some confirmation that it has happened without needing to be near the valve. The same would be true of the…
-
Notification on Phone when Window is Open
Would it be possible for the Tado app to create a notification pop up on your phone to let you know that a window is open?
-
Create an option for the Radiator Knob to NOT trigger the boiler
For houses with a floor heating system the setup how TADO Thermostat works with the radiator buttons not ideal. If one of the radiator buttons requires the radiator to heat up, this will now trigger the boiler and will then trigger the floor heating as well consuming a lot of unwanted heat. Suggestion is to create an…
-
Fireplace detection
During winter season I regularly use my fireplace, the increasing temperature will soon enough shut off my ac unit (heating). So far so good. I usually set he ac unit in fan mode to help distribute the heat. I’ve tried to automate this without much success. I see no support for this in the Tado app. Since HomeKit does not…
-
Master Temperature Control
I want my whole house to be 18 degrees. I don't want to have to go onto each room
-
Multiple schedules in one room
It would be great to be able to generate different schedules for different devices in the same Room. I have an UFH with wired thermostat and a radiator with RTV in the same physical room. Weekday mornings heat is only needed for one hour, so UFH better stays off. The radiator would be much better controlled by a wall…